DIN-064CSB-PSL-HM 96 Position DIN Connector Receptacle Equivalent & Substitute Parts

Part Overview

The DIN-064CSB-PSL-HM is a 96 position DIN 41612 connector receptacle with female sockets, gold plating, and through-hole press-fit termination. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing system maintenance and new design implementations. Active alternatives from major manufacturers provide compatible electrical and mechanical interfaces while maintaining DIN 41612 standardization.

Substiute Parts

DIN-064CSB-PSL-HM

3MIn Stock: 892DIN-064CSB-PSL-HM Datasheet

Current PartRFQ

09032646850

HARTINGIn Stock: 82109032646850 Datasheet

MFR RecommendedRFQ

09032647850

HARTINGIn Stock: 71709032647850 Datasheet

MFR RecommendedRFQ

208458096001026

KYOCERA AVXIn Stock: 927208458096001026 Datasheet

MFR RecommendedRFQ

218458096001026

KYOCERA AVXIn Stock: 986218458096001026 Datasheet

MFR RecommendedRFQ

9-106203-1

TE Connectivity AMP ConnectorsIn Stock: 9609-106203-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following parameters:

Critical Parameters (Must Match):

• Connector type: Receptacle, Female Sockets
• Number of positions: 96
• Number of positions loaded: 64
• Pitch: 0.100" (2.54mm)
• Number of rows: 3
• Style: C
• Mounting type: Through Hole
• Termination: Press-Fit
• Material flammability rating: UL94 V-0
• Moisture sensitivity level: 1 (Unlimited)

Allowable Variations:

• Operating temperature range: Substitute must meet or exceed the original specification
• Contact finish: Gold or equivalent conductive finish acceptable
• Current rating: Substitute must meet or exceed the original specification
• Insulation material: Thermoplastic or polyester variants acceptable if UL94 V-0 compliant
• Product status: Active substitutes preferred for obsolete originals

All listed substitute parts satisfy these criteria and maintain full mechanical and electrical compatibility with DIN 41612 standardization.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: 208458096001026 (KYOCERA AVX)

This part maintains full electrical and thermal specification parity with the original DIN-064CSB-PSL-HM. Operating temperature range of -65°C ~ 125°C exceeds the original specification. Current rating of 3A matches the original. ROHS3 compliance and active product status ensure long-term availability and supply chain stability.

Secondary Recommendation: 9-106203-1 (TE Connectivity AMP Connectors)

This Eurocard series connector matches the original operating temperature range (-55°C ~ 125°C) and provides gold contact finish with 49.3µin thickness. ROHS3 compliance and active status support ongoing procurement. Contact finish thickness specification provides additional design confidence.

Alternative: 09032647850 (HARTING)

This part provides gold or gold-palladium contact finish with ROHS3 compliance and active status. Operating temperature range of -40°C ~ 105°C is narrower than the original specification. Current rating of 2A is lower than the original 3A specification. Selection requires confirmation that application thermal and current requirements do not exceed these limits.

Not Recommended: 09032646850 (HARTING)

Contact finish is not specified, and current rating is not provided. These unspecified parameters create uncertainty in electrical performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can I use 09032646850 as a direct replacement?

A: This part meets all mechanical and dimensional requirements for DIN 41612 Style C 96-position receptacles. However, contact finish and current rating are not specified in the technical data. If your application requires confirmed gold plating or specific current handling capacity, use 208458096001026, 218458096001026, or 9-106203-1 instead.

Q: What is the difference between 208458096001026 and 218458096001026?

A: Both parts are KYOCERA AVX 8458 series connectors with identical electrical and mechanical specifications. The primary difference is packaging designation. Both are functionally equivalent for PCB mounting applications.

Q: Does operating temperature range affect substitution eligibility?

A: Yes. The substitute part must operate at or above the temperature extremes of your application. If your system operates at -55°C, parts with -40°C minimum rating (HARTING 09032646850 and 09032647850) are not suitable. KYOCERA AVX parts rated to -65°C and TE Connectivity rated to -55°C are acceptable.

Q: Is the contact finish difference between gold and gold-palladium significant?

A: Both finishes provide equivalent electrical conductivity and corrosion resistance for DIN 41612 applications. Selection between gold and gold-palladium is application-dependent and does not affect mechanical compatibility.

Q: Why is the original DIN-064CSB-PSL-HM marked obsolete?

A: Obsolescence indicates the manufacturer (3M) has discontinued production. Active alternatives from HARTING, KYOCERA AVX, and TE Connectivity provide equivalent functionality and ensure continued component availability for maintenance and new designs.

Q: Can I mix substitute parts in the same assembly?

A: All listed substitutes are mechanically and electrically compatible with each other and with the original part. Mixed usage in the same assembly is permissible provided application requirements (temperature, current) are satisfied by all parts used.