DHR 200 C10 Current Sensor - Equivalent & Substitute Parts

Part Overview

The DHR 200 C10 is an active Hall Effect current sensor manufactured by LEM USA Inc., designed for AC/DC current measurement applications requiring 200A sensing capability. This open-loop, bidirectional module delivers ratiometric output (0 V ~ 10 V) and operates across industrial temperature ranges. The product maintains Active status with full RoHS compliance and REACH unaffected certification.

Substitute parts are identified when equivalent electrical and mechanical parameters allow direct functional replacement within the same application category, maintaining identical output characteristics, supply voltage ranges, and physical mounting specifications.

Substiute Parts

DHR 200 C10

LEM USA Inc.In Stock: 1042DHR 200 C10 Datasheet

Current PartRFQ

DHR 100 C10

LEM USA Inc.In Stock: 1151DHR 100 C10 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DHR 200 C10 is determined by strict adherence to the following critical parameters:

Mandatory Matching Parameters:

• Sensor Type: Hall Effect, Open Loop
• Output Specification: Ratiometric, 0 V ~ 10 V
• Frequency Range: DC ~ 6kHz
• Linearity: ±1%
• Accuracy: ±1%
• Voltage - Supply: 20V ~ 50V
• Response Time: 150ms
• Current - Supply (Max): 30mA
• Operating Temperature: -40°C ~ 70°C
• Polarization: Bidirectional
• Mounting Type: Panel Mount
• Package / Case: Module
• Manufacturer: LEM USA Inc.
• Series: DHR

Variable Parameter (Application-Dependent):

• Current - Sensing: 200A (primary specification; lower ratings available for reduced current measurement applications)

The DHR 100 C10 qualifies as a parametric equivalent substitute when the application requires measurement of currents up to 100A instead of 200A, with all other electrical and mechanical characteristics remaining identical.

Parameter Comparison

Engineering Selection Recommendations

DHR 200 C10 Primary Selection: Select the DHR 200 C10 for applications requiring measurement of AC/DC currents up to 200A. This part maintains Active product status with full RoHS compliance and REACH unaffected certification, ensuring regulatory compliance for industrial and commercial deployments.

DHR 100 C10 Substitute Selection: The DHR 100 C10 functions as a direct parametric equivalent when the application current measurement requirement does not exceed 100A. Both parts share identical electrical characteristics (output voltage, frequency response, accuracy, linearity), supply voltage specifications (20V ~ 50V), thermal operating range (-40°C ~ 70°C), and physical mounting configuration (Panel Mount Module). Both maintain Active status with equivalent compliance certifications.

Compliance Basis: Selection between these parts is determined solely by the maximum current measurement requirement of the application. All other functional parameters, environmental specifications, and regulatory certifications remain constant across both models within the DHR series.

Frequently Asked Questions (FAQ)

Q: Can the DHR 100 C10 replace the DHR 200 C10 in all applications?

A: The DHR 100 C10 functions as a direct substitute only when the application's maximum current measurement requirement does not exceed 100A. If the application requires measurement of currents between 100A and 200A, the DHR 200 C10 is the required selection. All other electrical and mechanical parameters are identical.

Q: Are the output voltage ranges identical between DHR 200 C10 and DHR 100 C10?

A: Yes. Both parts deliver ratiometric output of 0 V ~ 10 V across their respective current sensing ranges. The output voltage scaling differs proportionally to the current rating difference.

Q: Do both parts require identical supply voltage specifications?

A: Yes. Both the DHR 200 C10 and DHR 100 C10 operate with supply voltage range of 20V ~ 50V and maximum supply current of 30mA.

Q: Are the frequency response characteristics the same?

A: Yes. Both parts operate across the DC ~ 6kHz frequency range with identical 150ms response time.

Q: What is the operating temperature range for both parts?

A: Both the DHR 200 C10 and DHR 100 C10 operate across -40°C ~ 70°C.

Q: Are both parts RoHS compliant?

A: Yes. Both the DHR 200 C10 and DHR 100 C10 are RoHS Compliant with REACH Unaffected status.

Q: Is the mounting configuration identical?

A: Yes. Both parts are Panel Mount modules with identical physical package specifications.

Q: What accuracy and linearity specifications apply to both parts?

A: Both parts maintain ±1% linearity and ±1% accuracy specifications.