DG413HSDY-T1 Equivalent & Substitute Parts

Part Overview

The DG413HSDY-T1 is a 4-circuit IC switch with SPST NO/NC configuration, 35Ohm on-state resistance, and 16-SOIC surface mount packaging. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement. The DG413HSDY-T1-E3 provides a direct parametric equivalent with active product status, while alternative DG413 base product variants and cross-manufacturer options offer functional substitution with specified parameter variations.

Key Parameters

Parameter	Value
Switch Circuit Configuration	SPST - NO/NC
Number of Circuits	4
Multiplexer/Demultiplexer Circuit	1:1
On-State Resistance (Max)	35Ohm
Voltage - Supply, Single (V+)	13V ~ 44V
Voltage - Supply, Dual (V±)	±5V ~ 20V
Switch Time (Ton, Toff) (Max)	105ns, 80ns
Charge Injection	22pC
Channel Capacitance (CS(off), CD(off))	12pF, 12pF
Current - Leakage (IS(off)) (Max)	250pA
Crosstalk	-88dB @ 1MHz
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount

Substitute Part Grouping Explanation

Substitution for the DG413HSDY-T1 is determined by the following critical parameters:

Direct Parametric Equivalents maintain identical electrical specifications: 4-circuit SPST NO/NC configuration, 35Ohm on-state resistance, 13V–44V single supply voltage range, ±5V–20V dual supply voltage range, 16-SOIC package, and surface mount mounting type.

Functional Substitutes retain the same circuit topology (4-circuit SPST NO/NC, 1:1 multiplexer configuration, 16-SOIC package) but vary in on-state resistance (45Ohm or 4Ohm), supply voltage ranges, switch timing, charge injection, or leakage current specifications. These parts are compatible when the application tolerates the specified parameter deviations.

Packaging variants (Tube, Tape & Reel, Cut Tape & Digi-Reel) do not affect electrical compatibility but influence procurement and assembly workflows.

Parameter Comparison

Part Number	Manufacturer	Product Status	On-State Resistance (Max)	V+ Supply Range	V± Supply Range	Switch Time Ton/Toff (Max)	Charge Injection	Leakage Current (Max)	Operating Temp	Packaging	RoHS Status
DG413HSDY-T1	Vishay Siliconix	Obsolete	35Ohm	13V ~ 44V	±5V ~ 20V	105ns, 80ns	22pC	250pA	-40°C ~ 85°C	Tube	Non-compliant
DG413HSDY-T1-E3	Vishay Siliconix	Active	35Ohm	13V ~ 44V	±5V ~ 20V	105ns, 80ns	22pC	250pA	-40°C ~ 85°C	Tape & Reel	ROHS3 Compliant
DG413CY+	Analog Devices Inc./Maxim Integrated	Active	45Ohm	10V ~ 30V	±4.5V ~ 20V	175ns, 145ns	5pC	250pA	0°C ~ 70°C	Tube	ROHS3 Compliant
DG413CY+T	Analog Devices Inc./Maxim Integrated	Active	45Ohm	10V ~ 30V	±4.5V ~ 20V	175ns, 145ns	5pC	250pA	0°C ~ 70°C	Tape & Reel	ROHS3 Compliant
DG413DY+	Analog Devices Inc./Maxim Integrated	Active	45Ohm	10V ~ 30V	±4.5V ~ 20V	175ns, 145ns	5pC	250pA	-40°C ~ 85°C	Tube	ROHS3 Compliant
DG413DY+T	Analog Devices Inc./Maxim Integrated	Active	45Ohm	10V ~ 30V	±4.5V ~ 20V	175ns, 145ns	5pC	250pA	-40°C ~ 85°C	Cut Tape & Digi-Reel	ROHS3 Compliant
DG413DYZ	Renesas Electronics Corporation	Active	35Ohm	5V ~ 44V	±5V ~ 20V	175ns, 145ns	5pC	100pA	-40°C ~ 85°C	Tube	ROHS3 Compliant
DG413DYZ-T	Renesas Electronics Corporation	Active	35Ohm	5V ~ 44V	±5V ~ 20V	175ns, 145ns	5pC	100pA	-40°C ~ 85°C	Cut Tape & Digi-Reel	ROHS3 Compliant
DG413FDY+	Analog Devices Inc./Maxim Integrated	Active	35Ohm	9V ~ 36V	±4.5V ~ 20V	175ns, 145ns	5pC	250pA	-40°C ~ 85°C	Tube	ROHS3 Compliant
DG413FDY+T	Analog Devices Inc./Maxim Integrated	Active	35Ohm	9V ~ 36V	±4.5V ~ 20V	175ns, 145ns	5pC	250pA	-40°C ~ 85°C	Tape & Reel	ROHS3 Compliant
MAX4606CSE+	Analog Devices Inc./Maxim Integrated	Active	4Ohm	4.5V ~ 36V	±4.5V ~ 20V	120ns, 130ns	225pC	500pA	0°C ~ 70°C	Tube	ROHS3 Compliant

Engineering Selection Recommendations

Direct Replacement (Preferred for Obsolete Part Mitigation): DG413HSDY-T1-E3 is the primary equivalent, offering identical electrical parameters with active product status and ROHS3 compliance. The packaging change from Tube to Tape & Reel requires assembly process compatibility confirmation.

Active Alternatives with Matching On-State Resistance (35Ohm): DG413DYZ, DG413DYZ-T, DG413FDY+, and DG413FDY+T maintain the 35Ohm on-state resistance specification. DG413DYZ variants offer lower leakage current (100pA vs. 250pA) and extended single supply voltage range (5V–44V vs. 13V–44V). DG413FDY variants support narrower single supply range (9V–36V) but provide superior crosstalk performance (-105dB vs. -88dB @ 1MHz).

Active Alternatives with Higher On-State Resistance (45Ohm): DG413CY+, DG413CY+T, DG413DY+, and DG413DY+T introduce 10Ohm higher on-state resistance and narrower supply voltage ranges (10V–30V single supply). DG413DY+ and DG413DY+T extend operating temperature to -40°C–85°C, matching the original part. These are suitable when the application tolerates increased resistance and narrower supply margins.

Low-Resistance Alternative (4Ohm): MAX4606CSE+ provides significantly lower on-state resistance (4Ohm) with faster switching times (120ns/130ns) but introduces higher charge injection (225pC), increased leakage current (500pA), and reduced crosstalk performance (-60dB @ 1MHz). This part is suitable only for applications requiring minimal on-state resistance where the trade-offs in other parameters are acceptable.

All substitute parts maintain 4-circuit SPST NO/NC configuration, 1:1 multiplexer topology, 16-SOIC package, and surface mount mounting. All active alternatives carry ROHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can DG413HSDY-T1-E3 be used as a direct drop-in replacement for DG413HSDY-T1? A: Yes. DG413HSDY-T1-E3 is electrically identical and maintains the same 16-SOIC package footprint. The only difference is packaging format (Tape & Reel vs. Tube) and RoHS compliance status. Verify that your assembly process supports Tape & Reel format.

Q: What is the primary reason to substitute the DG413HSDY-T1? A: The DG413HSDY-T1 is classified as obsolete. DG413HSDY-T1-E3 provides the same electrical performance with active product status and RoHS3 compliance, ensuring long-term availability and regulatory compliance.

Q: Can I use DG413DYZ instead of DG413HSDY-T1? A: DG413DYZ is functionally compatible. It maintains 35Ohm on-state resistance, identical supply voltage ranges, and -40°C–85°C operating temperature. However, it features lower leakage current (100pA vs. 250pA), lower charge injection (5pC vs. 22pC), and slower switching times (175ns/145ns vs. 105ns/80ns). Use this part only if your application does not require the faster switching performance of the original.

Q: What are the trade-offs when using DG413CY+ or DG413DY+ variants? A: These parts increase on-state resistance to 45Ohm and narrow the single supply voltage range to 10V–30V. They offer lower charge injection (5pC vs. 22pC) and slower switching times. DG413CY+ limits operating temperature to 0°C–70°C, while DG413DY+ extends to -40°C–85°C. Select these only if your circuit tolerates higher on-state resistance and narrower supply margins.

Q: When should MAX4606CSE+ be considered? A: MAX4606CSE+ is suitable only for applications requiring very low on-state resistance (4Ohm). It introduces significantly higher charge injection (225pC), increased leakage current (500pA), and degraded crosstalk performance (-60dB vs. -88dB @ 1MHz). Operating temperature is limited to 0°C–70°C. This part is not recommended as a general substitute.

Q: Does packaging format affect electrical performance? A: No. Tube, Tape & Reel, and Cut Tape & Digi-Reel packaging formats do not alter electrical specifications. Packaging selection depends on assembly process requirements and procurement logistics. Confirm your assembly equipment compatibility before selecting a packaging variant.

Q: Are all substitute parts RoHS compliant? A: All active substitute parts listed carry ROHS3 compliance. The original DG413HSDY-T1 is RoHS non-compliant. DG413HSDY-T1-E3 provides RoHS3 compliance with identical electrical performance.

Q: What is the significance of the -E3 suffix on DG413HSDY-T1-E3? A: The -E3 suffix indicates a RoHS3-compliant variant with active product status. It is electrically and mechanically identical to DG413HSDY-T1 but with updated compliance certification and Tape & Reel packaging.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message