Request Quote
(Ships tomorrow)
DG413DY-T Equivalent & Substitute Parts
Part Overview
The DG413DY-T is a 4-circuit IC switch manufactured by Renesas Electronics Corporation, configured as SPST NO/NC with 35Ohm on-state resistance in a 16-SOIC surface mount package. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement. The DG413DY-T operates across a wide supply voltage range (5V to 44V single supply, ±5V to ±20V dual supply) and is suitable for analog switching applications requiring low on-state resistance and fast switching times.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | DG413DY-T |
| Manufacturer | Renesas Electronics Corporation |
| Switch Circuit Configuration | SPST - NO/NC |
| Number of Circuits | 4 |
| On-State Resistance (Max) | 35Ohm |
| Voltage - Supply, Single (V+) | 5V ~ 44V |
| Voltage - Supply, Dual (V±) | ±5V ~ 20V |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 5pC |
| Channel Capacitance (CS(off), CD(off)) | 9pF, 9pF |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Crosstalk | -85dB @ 1MHz |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package / Case | 16-SOIC (0.154", 3.90mm Width) |
| Product Status | Obsolete |
| RoHS Status | RoHS non-compliant |
Substitute Part Grouping Explanation
Substitution for the DG413DY-T is determined by strict alignment of the following electrical and mechanical parameters:
Primary Substitution Criteria:
- Switch circuit configuration: SPST - NO/NC
- Number of circuits: 4
- Package type: 16-SOIC surface mount
- On-state resistance: 35Ohm (direct match) or within acceptable tolerance for the application
- Supply voltage compatibility: Single supply 5V ~ 44V and/or dual supply ±5V ~ 20V
- Operating temperature range: -40°C ~ 85°C
Substitution Categories:
Direct Equivalent (Identical Electrical Specifications):
- DG413DYZ-T: Identical electrical parameters, active product status, RoHS3 compliant
- DG413DY-E3: Identical electrical parameters, active product status, RoHS3 compliant
Compatible Substitutes (Equivalent Functionality, Different Resistance or Voltage Ratings):
- ADG413BRZ and ADG413BRZ-REEL: 35Ohm on-state resistance, 12V single supply / ±15V dual supply, active status, RoHS3 compliant
- DG413CY+ and DG413CY+T: 45Ohm on-state resistance, 10V ~ 30V single supply / ±4.5V ~ 20V dual supply, active status, RoHS3 compliant
- DG413DY+ and DG413DY+T: 45Ohm on-state resistance, 10V ~ 30V single supply / ±4.5V ~ 20V dual supply, active status, RoHS3 compliant
Functional Alternatives (Different On-State Resistance):
- DG213DY-E3 and DG213DY-T1-E3: 60Ohm on-state resistance, 13V ~ 36V single supply / ±7V ~ 22V dual supply, active status, RoHS3 compliant
Parameter Comparison
| Part Number | Manufacturer | On-State Resistance (Max) | V+ Supply | V± Supply | Switch Time (Ton/Toff) | Leakage Current (Max) | Operating Temp | Product Status | RoHS Status |
|---|---|---|---|---|---|---|---|---|---|
| DG413DY-T | Renesas | 35Ohm | 5V ~ 44V | ±5V ~ 20V | 175ns, 145ns | 100pA | -40°C ~ 85°C | Obsolete | Non-compliant |
| DG413DYZ-T | Renesas | 35Ohm | 5V ~ 44V | ±5V ~ 20V | 175ns, 145ns | 100pA | -40°C ~ 85°C | Active | ROHS3 Compliant |
| ADG413BRZ | Analog Devices | 35Ohm | 12V | ±15V | 175ns, 145ns | 250pA | -40°C ~ 85°C | Active | ROHS3 Compliant |
| ADG413BRZ-REEL | Analog Devices | 35Ohm | 12V | ±15V | 175ns, 145ns | 250pA | -40°C ~ 85°C | Active | ROHS3 Compliant |
| DG213DY-E3 | Vishay Siliconix | 60Ohm | 13V ~ 36V | ±7V ~ 22V | 130ns, 100ns | 500pA | -40°C ~ 85°C | Active | ROHS3 Compliant |
| DG213DY-T1-E3 | Vishay Siliconix | 60Ohm | 13V ~ 36V | ±7V ~ 22V | 130ns, 100ns | 500pA | -40°C ~ 85°C | Active | ROHS3 Compliant |
| DG413CY+ | Analog Devices/Maxim | 45Ohm | 10V ~ 30V | ±4.5V ~ 20V | 175ns, 145ns | 250pA | 0°C ~ 70°C | Active | ROHS3 Compliant |
| DG413CY+T | Analog Devices/Maxim | 45Ohm | 10V ~ 30V | ±4.5V ~ 20V | 175ns, 145ns | 250pA | 0°C ~ 70°C | Active | ROHS3 Compliant |
| DG413DY+ | Analog Devices/Maxim | 45Ohm | 10V ~ 30V | ±4.5V ~ 20V | 175ns, 145ns | 250pA | -40°C ~ 85°C | Active | ROHS3 Compliant |
| DG413DY+T | Analog Devices/Maxim | 45Ohm | 10V ~ 30V | ±4.5V ~ 20V | 175ns, 145ns | 250pA | -40°C ~ 85°C | Active | ROHS3 Compliant |
| DG413DY-E3 | Vishay Siliconix | 35Ohm | 5V ~ 44V | ±5V ~ 20V | 175ns, 145ns | 250pA | -40°C ~ 85°C | Active | ROHS3 Compliant |
Engineering Selection Recommendations
Tier 1 - Direct Replacement (Recommended for Obsolete Part Replacement):
DG413DYZ-T is the primary recommended substitute. It maintains identical electrical specifications to the DG413DY-T while offering active product status and RoHS3 compliance. This part is suitable for direct substitution in existing designs without circuit modification.
DG413DY-E3 (Vishay Siliconix) provides an alternative direct equivalent with identical electrical parameters and active status. Both Tier 1 options support the full supply voltage range of the original part (5V ~ 44V single supply, ±5V ~ 20V dual supply).
Tier 2 - Compatible Substitutes (Acceptable with Design Review):
ADG413BRZ and ADG413BRZ-REEL maintain the 35Ohm on-state resistance specification but operate at restricted supply voltages (12V single supply, ±15V dual supply). These parts are suitable for applications where the design supply voltage falls within these ranges. Both offer active status and RoHS3 compliance.
DG413DY+ and DG413DY+T provide 45Ohm on-state resistance with supply voltage range of 10V ~ 30V single supply and ±4.5V ~ 20V dual supply. These parts are acceptable substitutes for applications where the slightly higher on-state resistance does not impact circuit performance. Extended temperature range (-40°C ~ 85°C) is maintained.
Tier 3 - Functional Alternatives (Application-Dependent):
DG213DY-E3 and DG213DY-T1-E3 feature 60Ohm on-state resistance, representing a significant increase from the original 35Ohm specification. These parts are suitable only for applications where higher on-state resistance is acceptable. Supply voltage range is restricted to 13V ~ 36V single supply and ±7V ~ 22V dual supply.
All recommended substitutes maintain the 16-SOIC package format, 4-circuit SPST NO/NC configuration, and -40°C ~ 85°C operating temperature range (except DG413CY+/DG413CY+T which operate 0°C ~ 70°C).
Frequently Asked Questions (FAQ)
Q: Can DG413DYZ-T be used as a direct replacement for DG413DY-T?
A: Yes. DG413DYZ-T is electrically identical to DG413DY-T with matching on-state resistance (35Ohm), supply voltage ranges (5V ~ 44V single, ±5V ~ 20V dual), switching times, and operating temperature. The primary difference is product status (active vs. obsolete) and RoHS compliance (ROHS3 vs. non-compliant). No circuit modifications are required.
Q: What is the difference between DG413DY-E3 and DG413DYZ-T?
A: Both parts are electrically equivalent to the original DG413DY-T. The difference lies in manufacturer (Vishay Siliconix vs. Renesas) and packaging designation. Both are active products with RoHS3 compliance. Selection between them depends on supplier availability and procurement preferences.
Q: Can I use ADG413BRZ if my circuit operates at 5V supply?
A: No. ADG413BRZ is rated for 12V single supply operation. Using it at 5V supply violates the manufacturer's specifications and may result in improper device operation or damage. For 5V applications, use DG413DYZ-T, DG413DY-E3, or DG413DY-T.
Q: What is the impact of using DG413DY+ instead of DG413DY-T?
A: DG413DY+ has 45Ohm on-state resistance compared to 35Ohm in the original part. This 10Ohm increase may affect circuit performance in applications sensitive to switch resistance. Supply voltage range is also restricted (10V ~ 30V single supply vs. 5V ~ 44V). Evaluate circuit tolerance to increased resistance before substitution.
Q: Are DG213DY-E3 and DG213DY-T1-E3 suitable replacements?
A: These parts are functional alternatives only. The 60Ohm on-state resistance represents a 71% increase from the original 35Ohm specification. Supply voltage range is also restricted (13V ~ 36V single supply vs. 5V ~ 44V). Use only if circuit design accommodates higher on-state resistance and operates within the specified voltage range.
Q: What packaging options are available for substitute parts?
A: All substitute parts maintain the 16-SOIC surface mount package. Packaging variants differ by tape format: Tube, Cut Tape (CT) & Digi-Reel®, and Tape & Reel (TR). Select based on procurement volume and assembly requirements. Electrical specifications remain identical across packaging variants of the same part number.
Q: Are all substitute parts RoHS3 compliant?
A: Yes. All recommended substitute parts carry RoHS3 compliance certification. The original DG413DY-T is RoHS non-compliant. If RoHS compliance is a design requirement, any of the recommended substitutes satisfy this requirement.
Q: What is the leakage current difference between DG413DY-T and substitute parts?
A: DG413DY-T specifies 100pA maximum leakage current. Most substitute parts (ADG413BRZ, DG413CY+, DG413DY+) specify 250pA maximum. DG213DY variants specify 500pA maximum. For applications sensitive to leakage current, verify that the higher leakage specification does not impact circuit performance.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts