DG150-YG Terminal Block Ground Connector Equivalent & Substitute Parts

Part Overview

The DG150-YG is a 2-position ground terminal block connector from Eaton - Bussmann Electrical Division, designed for earth grounding applications with wire gauge capacity of 2-12 AWG. This component is classified as obsolete, making identification of functionally equivalent substitute parts essential for ongoing system maintenance and new design implementations where legacy components are no longer available.

Substiute Parts

DG150-YG

Eaton - Bussmann Electrical DivisionIn Stock: 1038DG150-YG Datasheet

Current PartRFQ

41199.2

On Shore Technology Inc.In Stock: 117941199.2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DG150-YG are identified based on the following critical parameters that define functional equivalence:

• Number of Positions: 2
• Number of Levels: 1
• Terminal Width: 16.0mm
• Termination Style: Screw
• Wire Gauge Range: 2-12 AWG minimum coverage
• Type: Ground, Earth
• Material - Insulation: Polyamide (PA66), Nylon 6/6
• Color: Green, Yellow

The substitute part 41199.2 from On Shore Technology Inc. meets these core substitution criteria, maintaining identical position count, level configuration, terminal width, termination method, and wire gauge compatibility within the specified range.

Parameter Comparison

Engineering Selection Recommendations

The 41199.2 from On Shore Technology Inc. is an active product with current manufacturing support, providing continuity for applications previously using the obsolete DG150-YG. Both components share identical mechanical and electrical specifications for the critical substitution parameters: 2-position configuration, 16.0mm terminal width, screw termination, and 2-12 AWG wire gauge compatibility.

The 41199.2 offers an extended wire gauge range in metric units (2.5-50mm² versus 4-35mm²), providing additional flexibility for wire selection. Both components utilize identical insulation material (Polyamide PA66, Nylon 6/6) and maintain the green-yellow color coding for ground applications. The substitute part carries ROHS3 compliance, meeting current regulatory requirements for new designs and replacements.

Frequently Asked Questions (FAQ)

Q: Can the 41199.2 directly replace the DG150-YG in existing installations?

A: Yes. Both components share identical specifications for the critical substitution parameters: 2-position ground terminal block, 16.0mm terminal width, screw termination, and 2-12 AWG wire gauge range. The mechanical and electrical compatibility is equivalent.

Q: What is the difference in wire gauge range between these parts?

A: The DG150-YG specifies 4-35mm², while the 41199.2 specifies 2.5-50mm². Both support the 2-12 AWG range. The 41199.2 provides a wider metric range, allowing use with smaller and larger wire cross-sections if required by application design.

Q: Are there voltage or current rating differences?

A: The DG150-YG provides IEC voltage rating of 1000V and IEC current rating of 125A. The 41199.2 does not specify these ratings in the available data. For applications requiring specific voltage or current compliance, verify the 41199.2 datasheet against your system requirements.

Q: What is the difference in stripping length?

A: The DG150-YG requires 14mm stripping length, while the 41199.2 requires 20mm. Installation procedures must account for this difference when preparing wire terminations.

Q: Is the 41199.2 suitable for new designs?

A: Yes. The 41199.2 is an active product with current manufacturing status and ROHS3 compliance, making it appropriate for new design implementations requiring 2-position ground terminal blocks with screw termination and 2-12 AWG wire gauge capacity.