DFE10I600PM Equivalent & Substitute Parts

Part Overview

The DFE10I600PM is a general-purpose rectifier diode manufactured by IXYS, rated for 600 V DC reverse voltage and 10 A average rectified current. The device features fast recovery characteristics with a reverse recovery time of 35 ns and is packaged in a TO-220ACFP through-hole configuration. This diode is classified as Active product status and is RoHS3 compliant.

Substitute parts are identified when equivalent electrical performance can be achieved within the specified voltage and current ratings, while maintaining compatible mechanical packaging and thermal characteristics. Alternative devices may be selected based on application requirements for current capacity, forward voltage characteristics, or thermal performance.

Substiute Parts

DFE10I600PM

IXYSIn Stock: 7601DFE10I600PM Datasheet

Current PartRFQ

RFV12TG6SGC9

Rohm SemiconductorIn Stock: 1724RFV12TG6SGC9 Datasheet

SimilarRFQ

RFV15TG6SGC9

Rohm SemiconductorIn Stock: 3079RFV15TG6SGC9 Datasheet

SimilarRFQ

RFV8TG6SGC9

Rohm SemiconductorIn Stock: 1791RFV8TG6SGC9 Datasheet

SimilarRFQ

RFVS8TG6SGC9

Rohm SemiconductorIn Stock: 2075RFVS8TG6SGC9 Datasheet

SimilarRFQ

STTH5R06FP

STMicroelectronicsIn Stock: 36240STTH5R06FP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DFE10I600PM are qualified based on the following criteria:

Voltage Rating Compatibility: All substitute parts maintain the 600 V DC reverse voltage rating, ensuring equivalent reverse bias performance in the application circuit.

Current Rating Consideration: Substitute parts are grouped by average rectified current capacity. Parts rated at 8 A, 12 A, or 15 A can replace the 10 A DFE10I600PM in applications where the actual circuit current demand does not exceed the substitute part's rating. Parts rated below 10 A (such as the 5 A STTH5R06FP) are suitable only for applications with reduced current requirements.

Package Compatibility: All substitute parts utilize TO-220-2 through-hole packaging with isolated tabs, maintaining mechanical and thermal interface compatibility with the original design.

Fast Recovery Classification: All substitute parts meet the fast recovery speed specification (≤ 500ns, > 200mA), ensuring switching performance consistency.

Thermal Performance: Operating temperature ratings range from 150°C to 175°C maximum junction temperature across the substitute family, providing thermal margin for various application environments.

Compliance Status: All substitute parts are RoHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity classification, matching the original part's regulatory and handling requirements.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitution (10 A Current Rating): No substitute part is rated at exactly 10 A average rectified current. Selection of alternative parts requires evaluation of actual circuit current demand.

Higher Current Capacity Substitutes: The RFV12TG6SGC9 (12 A) and RFV15TG6SGC9 (15 A) from Rohm Semiconductor provide increased current capacity while maintaining 600 V voltage rating and TO-220-2 packaging. These parts are suitable for applications where the DFE10I600PM operates below its maximum current rating and additional thermal margin is beneficial. Both devices are RoHS3 compliant and carry MSL 1 classification.

Lower Current Capacity Substitutes: The RFV8TG6SGC9 and RFVS8TG6SGC9 (both 8 A) from Rohm Semiconductor are suitable for applications with maximum circuit current not exceeding 8 A. The RFVS8TG6SGC9 exhibits slightly higher forward voltage (3.0 V @ 8 A) compared to RFV8TG6SGC9 (2.8 V @ 8 A). Both maintain 600 V rating and fast recovery characteristics.

Reduced Current Application: The STTH5R06FP from STMicroelectronics is rated for 5 A and is suitable only for applications with maximum circuit current not exceeding 5 A. This device offers the highest maximum junction temperature rating (175°C) among the substitute family and maintains TO-220-2 Full Pack isolated tab packaging identical to the original part.

Compliance and Regulatory: All substitute parts maintain RoHS3 compliance, REACH unaffected status, and MSL 1 (Unlimited) moisture sensitivity classification, ensuring compatibility with existing supply chain and manufacturing processes.

Frequently Asked Questions (FAQ)

Q: Can the RFV12TG6SGC9 or RFV15TG6SGC9 be used as direct replacements for the DFE10I600PM?

A: Yes, in applications where the actual circuit current does not exceed 10 A. These parts provide higher current capacity ratings (12 A and 15 A respectively) while maintaining the same 600 V voltage rating and TO-220-2 package configuration. The higher current rating provides additional design margin and thermal performance.

Q: What is the difference between RFV8TG6SGC9 and RFVS8TG6SGC9?

A: Both parts are rated for 8 A at 600 V in TO-220-2 packaging. The primary difference is forward voltage: RFV8TG6SGC9 exhibits 2.8 V @ 8 A, while RFVS8TG6SGC9 exhibits 3.0 V @ 8 A. The RFVS8TG6SGC9 has a slightly lower reverse recovery time (40 ns versus 45 ns). Selection depends on circuit requirements for forward voltage drop and switching speed.

Q: Is the STTH5R06FP suitable for all applications using the DFE10I600PM?

A: No. The STTH5R06FP is rated for 5 A average rectified current, making it suitable only for applications where the maximum circuit current does not exceed 5 A. It cannot be used in circuits requiring the full 10 A capacity of the DFE10I600PM. However, it offers the highest maximum junction temperature (175°C) among the substitute family.

Q: Are all substitute parts available in the same package configuration?

A: All substitute parts use TO-220-2 through-hole packaging with isolated tabs, maintaining mechanical and thermal interface compatibility. The STTH5R06FP and DFE10I600PM both specify "Full Pack, Isolated Tab" configuration, while the Rohm devices specify TO-220-2 standard configuration. All are compatible with standard TO-220 mounting hardware and thermal management solutions.

Q: What are the key parameters that determine substitution compatibility?

A: The primary parameters are: (1) Voltage - DC Reverse rating must equal or exceed 600 V, (2) Current - Average Rectified rating must meet or exceed the application's maximum current demand, (3) Package type must be TO-220-2 through-hole configuration, (4) Speed classification must maintain fast recovery characteristics (≤ 500ns, > 200mA), and (5) Compliance status must maintain RoHS3 and MSL 1 requirements.

Q: How do forward voltage differences affect circuit performance?

A: Forward voltage drop directly impacts power dissipation and heat generation. The DFE10I600PM exhibits 1.5 V @ 10 A, while substitute parts range from 2.8 V to 3.0 V at their respective current ratings. Higher forward voltage results in increased power loss (P = Vf × I). Circuit thermal design must account for these differences when selecting substitute parts.

Q: Can reverse recovery time differences affect circuit operation?

A: Reverse recovery time (trr) affects switching transients and electromagnetic interference characteristics. The DFE10I600PM has 35 ns trr, while substitutes range from 40 ns to 50 ns. These differences are within the fast recovery classification (≤ 500ns) and are generally not critical for standard rectification applications. High-frequency switching circuits may require evaluation of specific trr values.

Q: What inventory considerations apply to substitute part selection?

A: Current inventory levels are: DFE10I600PM (7564 pcs), RFV15TG6SGC9 (3050 pcs), RFVS8TG6SGC9 (2019 pcs), RFV12TG6SGC9 (1693 pcs), RFV8TG6SGC9 (1686 pcs), and STTH5R06FP (36200 pcs). The STTH5R06FP offers the highest inventory availability, while the RFV8TG6SGC9 and RFV12TG6SGC9 have the lowest stock levels.