DF63M-6P-3.96DS(01) Equivalent & Substitute Parts

Part Overview

The DF63M-6P-3.96DS(01) is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole, right-angle board-to-cable/wire applications. This 6-position connector operates at 0.156" (3.96mm) pitch and is rated for 600VAC/DC operation across an extended temperature range of -55°C to 105°C. The part carries Last Time Buy status, indicating discontinued production. Identifying equivalent substitute parts is essential for ongoing design support, inventory management, and long-term product availability.

Substiute Parts

DF63M-6P-3.96DS(01)

Hirose Electric Co LtdIn Stock: 811DF63M-6P-3.96DS(01) Datasheet

Current PartRFQ

DF63-6P-3.96DS(01)

Hirose Electric Co LtdIn Stock: 1200DF63-6P-3.96DS(01) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DF63M-6P-3.96DS(01) is determined by the following critical parameters:

• Connector pitch: 0.156" (3.96mm)
• Number of positions: 6
• Mounting configuration: Through hole, right angle
• Contact type: Male pin header
• Shrouding: Shrouded - 4 wall
• Voltage rating: 600VAC/DC minimum
• Operating temperature range: -55°C to 105°C minimum
• Termination method: Solder
• Fastening type: Latch holder
• Insulation material: Polybutylene Terephthalate (PBT), glass filled
• Material flammability: UL94 V-0

The substitute part DF63-6P-3.96DS(01) maintains identical electrical and mechanical specifications across all critical parameters, ensuring direct functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

The DF63-6P-3.96DS(01) is the direct substitute for the DF63M-6P-3.96DS(01). Both parts are manufactured by Hirose Electric Co Ltd within the EnerBee™ DF63 series and share identical electrical and mechanical specifications.

The primary distinction is product status: the original part (DF63M-6P-3.96DS(01)) is Last Time Buy, while the substitute (DF63-6P-3.96DS(01)) maintains Active status with higher current inventory availability (1149 pieces versus 781 pieces). Both parts meet RoHS compliance requirements and UL94 V-0 flammability standards.

The substitute part is suitable for direct replacement in all applications where the original part was specified, with no design modifications required.

Frequently Asked Questions (FAQ)

Q: Can DF63-6P-3.96DS(01) be used as a direct replacement for DF63M-6P-3.96DS(01)?

A: Yes. Both parts are electrically and mechanically identical across all critical parameters including pitch, position count, voltage rating, temperature range, and contact configuration. Direct substitution is supported without design changes.

Q: What is the difference between these two part numbers?

A: The primary difference is product lifecycle status. DF63M-6P-3.96DS(01) is Last Time Buy, indicating discontinued production. DF63-6P-3.96DS(01) is Active with ongoing availability. The "M" designation in the original part number does not indicate a functional difference in this case.

Q: Are there packaging differences between these parts?

A: Yes. DF63M-6P-3.96DS(01) is supplied in Bag packaging, while DF63-6P-3.96DS(01) is supplied in Bulk packaging. Both packaging formats are suitable for through-hole assembly processes.

Q: Do both parts meet the same compliance standards?

A: Both parts meet UL94 V-0 flammability requirements and RoHS compliance. DF63M-6P-3.96DS(01) carries ROHS3 certification, while DF63-6P-3.96DS(01) carries standard RoHS certification. Both are acceptable for regulated applications.

Q: What is the mating pitch specification?

A: Both parts operate at 0.156" (3.96mm) pitch. This specification is critical for connector compatibility and must be matched in mating receptacle designs.

Q: Are these parts suitable for high-temperature applications?

A: Both parts are rated for -55°C to 105°C operating temperature range, supporting extended temperature applications within this specification window.