DF63-2P-7.92DSA Equivalent & Substitute Parts

Part Overview

The DF63-2P-7.92DSA is a rectangular connector header manufactured by Hirose Electric Co Ltd, part of the EnerBee™ DF63 series. This through-hole connector features a 2-position, single-row configuration with 0.312" (7.92mm) pitch spacing, designed for board-to-cable/wire applications with shrouded 4-wall construction and solder termination.

The DF63-2P-7.92DSA is classified as obsolete. Identifying equivalent substitute parts is essential for maintaining design compatibility, ensuring continued component availability, and supporting legacy system maintenance and repairs.

Substiute Parts

DF63-2P-7.92DSA

Hirose Electric Co LtdIn Stock: 897DF63-2P-7.92DSA Datasheet

Current PartRFQ

DF63M-2P-7.92DSA

Hirose Electric Co LtdIn Stock: 1585DF63M-2P-7.92DSA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The DF63M-2P-7.92DSA qualifies as a direct substitute for the DF63-2P-7.92DSA based on the following critical parameters:

Matching Parameters:

• Connector type: Header
• Contact type: Male Pin
• Number of positions: 2
• Number of rows: 1
• Pitch - mating: 0.312" (7.92mm)
• Mounting type: Through Hole
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Fastening type: Latch Holder
• Insulation material: Polybutylene Terephthalate (PBT), Glass Filled
• Operating temperature: -55°C ~ 105°C
• Voltage rating: 600VAC/DC
• Material flammability rating: UL94 V-0
• RoHS compliance: RoHS Compliant

Both parts belong to the EnerBee™ DF63 series and maintain electrical and mechanical compatibility across all specified parameters. The substitute part is currently in active production status, ensuring long-term availability.

Parameter Comparison

Engineering Selection Recommendations

The DF63M-2P-7.92DSA is the direct substitute for the obsolete DF63-2P-7.92DSA. The substitute part maintains full electrical and mechanical compatibility across all critical parameters, including connector configuration, pitch spacing, voltage and temperature ratings, and material certifications.

The DF63M-2P-7.92DSA is currently in active production status, providing assured long-term component availability for new designs and legacy system support. Both parts carry identical RoHS compliance and UL94 V-0 flammability ratings, meeting the same regulatory and safety requirements.

The contact post length differs by 0.012" (0.31mm) between the two parts. This minor dimensional variation does not affect electrical performance or mechanical mating compatibility within the specified connector system.

Frequently Asked Questions (FAQ)

Q: Can the DF63M-2P-7.92DSA be used as a direct replacement for the DF63-2P-7.92DSA?

A: Yes. Both parts share identical connector type, contact configuration, pitch spacing, mounting method, and electrical ratings. The DF63M-2P-7.92DSA is the active production equivalent and provides full functional compatibility.

Q: What is the difference between the two part numbers?

A: The primary difference is product status. The DF63-2P-7.92DSA is obsolete, while the DF63M-2P-7.92DSA is in active production. The contact post length differs by 0.012" (0.31mm), but this does not affect mating compatibility or electrical performance within the EnerBee™ DF63 connector system.

Q: Are both parts RoHS compliant?

A: Yes. Both the DF63-2P-7.92DSA and DF63M-2P-7.92DSA are RoHS compliant and carry UL94 V-0 flammability ratings.

Q: What is the pitch spacing for these connectors?

A: Both parts feature a mating pitch of 0.312" (7.92mm), which is the standard spacing for the EnerBee™ DF63 series 2-position header configuration.

Q: Are there any packaging differences between these parts?

A: The DF63-2P-7.92DSA is listed with no specified packaging information. The DF63M-2P-7.92DSA is supplied in bulk packaging. Confirm packaging requirements with your supplier based on application needs.