DF62W-9P-2.2DSA(01) Equivalent & Substitute Parts

Part Overview

The DF62W-9P-2.2DSA(01) is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole mounting in board-to-cable/wire applications. This connector features 9 positions arranged in 3 rows with 0.087" (2.20mm) pitch spacing, shrouded 4-wall construction, and gold-plated mating contacts. The part is classified as obsolete, making identification of active equivalent models essential for ongoing procurement and design continuity.

Substiute Parts

DF62W-9P-2.2DSA(01)

Hirose Electric Co LtdIn Stock: 962DF62W-9P-2.2DSA(01) Datasheet

Current PartRFQ

DF62WZ-9P-2.2DSA(50)

Hirose Electric Co., Ltd.In Stock: 1021DF62WZ-9P-2.2DSA(50) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The DF62WZ-9P-2.2DSA(50) qualifies as a direct substitute based on the following critical parameters:

Matching Parameters:

• Connector type, contact type, and male pin configuration
• 9 positions in 3-row arrangement
• 0.087" (2.20mm) mating pitch and row spacing
• Through-hole mounting with solder termination
• Shrouded 4-wall construction with latch holder fastening
• Square contact shape with gold mating contact finish
• 0.112" (2.84mm) contact post length
• 0.610" (15.49mm) insulation height
• Polybutylene Terephthalate (PBT) insulation material
• Black insulation color
• Operating temperature range -35°C ~ 105°C
• 250V voltage rating
• IP67 ingress protection
• UL94 V-0 flammability rating
• Moisture Sensitivity Level 1 (Unlimited)

Distinguishing Characteristics: The substitute part carries Active product status versus the Obsolete status of the main part, ensuring continued availability. The DF62WZ variant includes additional waterproof features and carries RoHS3 and REACH compliance certifications. Contact material differs (Brass vs. Phosphor Bronze) and post contact finish is Tin versus unspecified in the original part.

Parameter Comparison

Engineering Selection Recommendations

The DF62WZ-9P-2.2DSA(50) is the appropriate substitute for the obsolete DF62W-9P-2.2DSA(01). Selection is based on the following factors:

Product Status: The substitute maintains Active status, ensuring long-term availability and supply chain continuity. The original part's Obsolete classification necessitates transition to an equivalent model.

Electrical and Mechanical Compatibility: All critical mating parameters are identical, including connector geometry, pitch spacing, contact configuration, and electrical ratings. The 9-position, 3-row header with 0.087" (2.20mm) pitch maintains full mechanical and electrical interchangeability.

Compliance and Certifications: The substitute carries RoHS3 and REACH compliance certifications, meeting current regulatory requirements. Both parts maintain UL94 V-0 flammability rating and IP67 ingress protection.

Enhanced Features: The substitute includes waterproof designation in addition to the board guide feature, providing equivalent or improved environmental protection.

Frequently Asked Questions (FAQ)

Q: Are the DF62W-9P-2.2DSA(01) and DF62WZ-9P-2.2DSA(50) mechanically interchangeable?

A: Yes. Both connectors share identical mating pitch (0.087" / 2.20mm), row spacing, position count (9 in 3 rows), insulation height (0.610" / 15.49mm), and through-hole mounting configuration. Physical dimensions and mounting footprints are equivalent.

Q: What is the difference in contact material between these parts?

A: The original part uses Phosphor Bronze contacts, while the substitute uses Brass contacts. Both materials are standard for rectangular connector applications and maintain the specified electrical performance at 250V rating.

Q: Does the substitute part have different post contact finish?

A: The substitute specifies Tin finish on the post contacts, whereas the original part does not specify post finish. This difference does not affect solder joint formation or electrical performance in through-hole applications.

Q: Why is the substitute part classified as Active while the original is Obsolete?

A: The DF62WZ variant represents the current production model in the DF62W series. Hirose Electric has transitioned manufacturing to the DF62WZ line, which includes enhanced features such as waterproof designation and current regulatory compliance (RoHS3, REACH).

Q: What is the packaging difference?

A: The substitute is supplied in Tray packaging, while the original part packaging is not specified. Tray packaging is standard for production quantities and does not affect component functionality.

Q: Are both parts suitable for IP67 applications?

A: Yes. Both the DF62W-9P-2.2DSA(01) and DF62WZ-9P-2.2DSA(50) carry IP67 ingress protection rating and operate across the identical temperature range (-35°C ~ 105°C), making them suitable for sealed and moisture-resistant applications.

Q: Can I use the substitute in existing designs without modification?

A: Yes. The substitute maintains full compatibility with existing PCB layouts, mating connectors, and cable assemblies designed for the original part. No design changes are required.