DF62-7EP-2.2C(10) Equivalent & Substitute Parts

Part Overview

The DF62-7EP-2.2C(10) is a 7-position rectangular connector housing manufactured by Hirose Electric Co Ltd, designed for applications requiring crimp-terminated male pin connections with 2.20mm pitch. This connector features a white polybutylene terephthalate (PBT) housing suitable for free-hanging in-line mounting. The part is currently classified as obsolete, making identification of compatible substitute components essential for ongoing system support and new design implementations.

Substiute Parts

DF62-7EP-2.2C(10)

Hirose Electric Co LtdIn Stock: 880DF62-7EP-2.2C(10) Datasheet

Current PartRFQ

DF62B-7EP-2.2C(10)

Hirose Electric Co LtdIn Stock: 1306DF62B-7EP-2.2C(10) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DF62-7EP-2.2C(10) is determined by strict equivalence across the following critical parameters:

• Connector type (Plug)
• Contact type (Male Pin)
• Number of positions (7)
• Pitch specification (0.087" / 2.20mm)
• Row configuration (3 rows with 0.079" / 2.00mm spacing)
• Mounting type (Free Hanging In-Line)
• Contact termination method (Crimp)
• Fastening mechanism (Latch Holder)
• Insulation material (PBT)
• Operating temperature range (-35°C to 105°C)

The DF62B-7EP-2.2C(10) meets all these criteria and is classified as a direct substitute within the DF62 series family.

Parameter Comparison

Engineering Selection Recommendations

The DF62B-7EP-2.2C(10) is the direct substitute for the obsolete DF62-7EP-2.2C(10). Both components share identical electrical and mechanical specifications across all functional parameters. The primary distinction is product status: the DF62B variant is currently active in production with ROHS3 compliance certification, whereas the original part is obsolete and non-compliant with RoHS regulations. For new designs and ongoing system support, the DF62B-7EP-2.2C(10) is the appropriate selection.

Frequently Asked Questions (FAQ)

Q: Are the DF62-7EP-2.2C(10) and DF62B-7EP-2.2C(10) mechanically interchangeable?

A: Yes. Both connectors share identical mechanical specifications including pitch (2.20mm), row configuration (3 rows at 2.00mm spacing), mounting type (free-hanging in-line), and fastening mechanism (latch holder). They are fully interchangeable in applications where the original part was used.

Q: What is the difference between these two part numbers?

A: The DF62B-7EP-2.2C(10) is the active production variant of the DF62 series. The primary differences are product status (active vs. obsolete) and regulatory compliance (ROHS3 compliant vs. non-compliant). All functional and electrical parameters remain identical.

Q: Can I use the DF62B-7EP-2.2C(10) in existing assemblies designed for the DF62-7EP-2.2C(10)?

A: Yes. The substitute part maintains full compatibility with existing designs. No modifications to PCB layouts, mating connectors, or assembly procedures are required.

Q: What packaging options are available for the substitute part?

A: The DF62B-7EP-2.2C(10) is supplied in bulk packaging, whereas the original part had no specified packaging designation.

Q: Are there any temperature or environmental limitations I should consider?

A: Both parts operate across the identical temperature range of -35°C to 105°C. No additional environmental constraints apply to the substitute component.