DF62-4S-2.2C(11) Equivalent & Substitute Parts

Part Overview

The DF62-4S-2.2C(11) is a 4-position rectangular connector housing manufactured by Hirose Electric Co Ltd, designed for applications requiring a 2.20mm pitch socket configuration with crimp termination. This part is classified as obsolete, which necessitates identification of functionally equivalent alternatives for ongoing design support and procurement continuity. The substitute part maintains identical electrical and mechanical specifications while offering improved product status and regulatory compliance.

Substiute Parts

DF62-4S-2.2C(11)

Hirose Electric Co LtdIn Stock: 889DF62-4S-2.2C(11) Datasheet

Current PartRFQ

DF62B-4S-2.2C(11)

Hirose Electric Co LtdIn Stock: 1722DF62B-4S-2.2C(11) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DF62-4S-2.2C(11) is based on strict equivalence across all critical electrical and mechanical parameters. The substitute part DF62B-4S-2.2C(11) maintains identical specifications in the following key areas:

• Number of positions: 4
• Pitch spacing: 0.087" (2.20mm)
• Row configuration: 2 rows with 0.079" (2.00mm) spacing
• Contact type: Female socket with crimp termination
• Fastening mechanism: Latch lock
• Insulation material: Polybutylene Terephthalate (PBT)
• Operating temperature range: -35°C to 105°C
• Mounting configuration: Free hanging (in-line)

The substitution is valid because both parts share identical connector geometry, contact configuration, and environmental specifications. The primary distinction lies in product status and regulatory compliance rather than functional performance.

Parameter Comparison

Engineering Selection Recommendations

The DF62B-4S-2.2C(11) is the direct substitute for the DF62-4S-2.2C(11). Selection of the substitute part is based on the following engineering considerations:

• The original part is classified as obsolete, limiting long-term procurement viability
• The substitute part maintains active product status, ensuring continued availability and manufacturer support
• The substitute part achieves ROHS3 compliance, whereas the original part is RoHS non-compliant
• Both parts are electrically and mechanically identical across all functional parameters
• The substitute part offers superior inventory availability (1676 Pcs versus 838 Pcs)

For new designs or redesigns, the DF62B-4S-2.2C(11) is the appropriate selection. For existing applications currently using the DF62-4S-2.2C(11), direct substitution is valid without circuit or mechanical modifications.

Frequently Asked Questions (FAQ)

Q: Are the DF62-4S-2.2C(11) and DF62B-4S-2.2C(11) mechanically interchangeable?

A: Yes. Both parts share identical connector geometry, pitch spacing (0.087" / 2.20mm), row configuration, and mounting type. No mechanical redesign is required for substitution.

Q: What is the difference between these two part numbers?

A: The primary differences are product status (obsolete versus active), RoHS compliance (non-compliant versus ROHS3 compliant), and inventory availability. Electrical and mechanical specifications are identical.

Q: Can I use the DF62B-4S-2.2C(11) in place of the DF62-4S-2.2C(11) in existing designs?

A: Yes. Direct substitution is valid. The substitute part maintains all functional specifications required for compatibility with existing mating connectors and circuit board layouts.

Q: What is the packaging difference between these parts?

A: The original part (DF62-4S-2.2C(11)) is supplied with unspecified packaging, while the substitute part (DF62B-4S-2.2C(11)) is supplied in bulk packaging. Both are suitable for standard assembly processes.

Q: Are contacts included with these connector housings?

A: No. Both the DF62-4S-2.2C(11) and DF62B-4S-2.2C(11) are connector housings only. Contacts must be sourced separately and crimped into the housing.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across the range of -35°C to 105°C, suitable for industrial and commercial applications.