DF60-3P-10.16DSA(45) Equivalent & Substitute Parts

Part Overview

The DF60-3P-10.16DSA(45) is a rectangular connector header manufactured by Hirose Electric Co Ltd, part of the EnerBee™ DF60 series. This through-hole connector features 3 positions with 0.400" (10.16mm) pitch spacing and is designed for board-to-cable/wire applications. The part is currently in Last Time Buy status, indicating limited availability. Identifying equivalent substitute parts is necessary to ensure design continuity and maintain supply chain flexibility for applications requiring this connector type.

Substiute Parts

DF60-3P-10.16DSA(45)

Hirose Electric Co LtdIn Stock: 1053DF60-3P-10.16DSA(45) Datasheet

Current PartRFQ

DF60-3P-10.16DSA(27)

Hirose Electric Co LtdIn Stock: 1147DF60-3P-10.16DSA(27) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DF60-3P-10.16DSA(45) is determined by the following critical parameters:

• Connector Type & Series: Must be Header type from the EnerBee™ DF60 series
• Position Count & Pitch: Must maintain 3 positions with 0.400" (10.16mm) mating pitch
• Mounting & Termination: Must be through-hole with solder termination
• Electrical Ratings: Must support 1000VAC/DC voltage rating
• Environmental Specifications: Must operate within -55°C ~ 105°C temperature range
• Compliance: Must maintain ROHS3 compliance status

The substitute part DF60-3P-10.16DSA(27) meets all these criteria, differing only in insulation color (Black vs. Red), which does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The DF60-3P-10.16DSA(27) is a direct functional equivalent to the DF60-3P-10.16DSA(45). Both parts are manufactured by Hirose Electric Co Ltd within the same EnerBee™ DF60 series and share identical electrical, mechanical, and environmental specifications. The sole difference is insulation color (Black versus Red), which is a cosmetic distinction without impact on electrical performance or mechanical compatibility.

Given that the DF60-3P-10.16DSA(45) carries Last Time Buy status with limited future availability, the DF60-3P-10.16DSA(27) is the recommended substitute for ongoing production and new designs. The substitute part maintains Active product status, ensuring continued availability and supply chain stability. Both parts are ROHS3 compliant and carry identical compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can DF60-3P-10.16DSA(27) be used as a direct replacement for DF60-3P-10.16DSA(45)?

A: Yes. Both parts are electrically and mechanically identical. They share the same connector type, position count, pitch spacing, voltage rating, temperature range, and contact specifications. The only difference is insulation color.

Q: What is the significance of the insulation color difference?

A: Insulation color serves as a visual identifier during assembly and maintenance but does not affect electrical performance, mechanical fit, or signal integrity. Selection between Red and Black insulation should be based on application-specific color-coding requirements or design preferences.

Q: Why is DF60-3P-10.16DSA(45) marked as Last Time Buy?

A: Last Time Buy status indicates that the manufacturer has discontinued or is phasing out this specific part variant. Customers should transition to equivalent active parts to ensure long-term supply availability.

Q: Are there any compatibility concerns when substituting these parts?

A: No compatibility concerns exist. Both parts are from the same manufacturer and series, with identical mechanical dimensions, electrical ratings, and mating specifications. PCB footprints and connector interfaces are interchangeable.

Q: What compliance certifications apply to both parts?

A: Both DF60-3P-10.16DSA(45) and DF60-3P-10.16DSA(27) are ROHS3 compliant, REACH unaffected, and carry UL94 V-0 material flammability ratings. Moisture sensitivity level is 1 (Unlimited) for both parts.