DF3A-6P-2DS(10) Equivalent & Substitute Parts

Part Overview

The DF3A-6P-2DS(10) is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for board-to-board or cable connections with a 6-position, single-row configuration at 2.00mm pitch. This part is classified as obsolete and has been superseded in active production. Due to its obsolete status and limited availability in original form, identifying functionally equivalent substitute parts is essential for ongoing system maintenance, repair, and new design implementations where legacy compatibility is required.

Substiute Parts

DF3A-6P-2DS(10)

Hirose Electric Co LtdIn Stock: 1088DF3A-6P-2DS(10) Datasheet

Current PartRFQ

DF3A-6P-2DS

Hirose Electric Co LtdIn Stock: 43029DF3A-6P-2DS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the DF3A-6P-2DS(10) is determined by strict alignment of the following critical parameters:

• Connector Type: Header configuration for board-to-board or cable connections
• Number of Positions: Exactly 6 positions to maintain pin count compatibility
• Pitch - Mating: 0.079" (2.00mm) spacing to ensure mechanical and electrical fit
• Mounting Type: Through Hole, Right Angle orientation for PCB integration
• Base Product Series: DF3 series from Hirose Electric Co Ltd

The recommended substitute part DF3A-6P-2DS meets all these criteria while maintaining active product status and current manufacturing availability.

Parameter Comparison

Engineering Selection Recommendations

The DF3A-6P-2DS serves as the direct functional equivalent to the obsolete DF3A-6P-2DS(10). Selection of this substitute is supported by:

• Product Status Alignment: The substitute maintains active manufacturing status, ensuring long-term availability and supply chain continuity
• Compliance Certifications: The substitute part is ROHS3 compliant and carries UL94 V-0 material flammability rating, meeting current regulatory requirements
• Series Continuity: Both parts belong to the DF3 series from Hirose Electric Co Ltd, ensuring design consistency within the connector family
• Mechanical and Electrical Compatibility: Identical pitch, position count, and mounting configuration guarantee direct substitution without PCB redesign

For applications requiring the obsolete DF3A-6P-2DS(10), the DF3A-6P-2DS substitute provides equivalent functionality with improved compliance status and active product support.

Frequently Asked Questions (FAQ)

Q: Can the DF3A-6P-2DS directly replace the DF3A-6P-2DS(10) without PCB modification?

A: Yes. Both parts share identical pitch (2.00mm), position count (6), mounting type (Through Hole, Right Angle), and connector configuration. Direct substitution on existing PCBs is mechanically and electrically compatible.

Q: What is the significance of the "(10)" designation in the original part number?

A: The "(10)" suffix typically indicates a specific packaging or manufacturing batch variant. The base part number DF3A-6P-2DS encompasses the functional specification, while the suffix may denote packaging quantity or production date code. The substitute DF3A-6P-2DS is supplied in bulk packaging.

Q: Are there compliance differences between the obsolete and substitute parts?

A: The substitute DF3A-6P-2DS is ROHS3 compliant with UL94 V-0 material flammability rating. The obsolete part's compliance status is not specified in available documentation. For applications subject to regulatory compliance requirements, the substitute part provides documented certification.

Q: What is the MSL (Moisture Sensitivity Level) difference, and does it affect usability?

A: The obsolete part lists MSL as Not Applicable, while the substitute is rated MSL 1 (Unlimited). MSL 1 indicates the component has unlimited shelf life without moisture control, representing improved handling characteristics and reduced storage requirements.

Q: Is the DF3A-6P-2DS available in the same quantities as the original part?

A: The substitute part DF3A-6P-2DS is actively manufactured with significantly higher inventory availability (43,014 pcs in stock versus 1,001 pcs for the obsolete variant), ensuring reliable supply for production and repair applications.