DF3A-10P-2DS(80) Equivalent & Substitute Parts

Part Overview

The DF3A-10P-2DS(80) is a rectangular connector header manufactured by Hirose Electric Co Ltd, classified as a connector header position component. This part is currently listed with obsolete product status. Due to its obsolete classification, identification of equivalent and substitute parts is necessary to maintain design continuity and ensure component availability for ongoing production, maintenance, and repair applications.

Substiute Parts

DF3A-10P-2DS(80)

Hirose Electric Co LtdIn Stock: 1018DF3A-10P-2DS(80) Datasheet

Current PartRFQ

DF3A-10P-2DS

Hirose Electric Co., Ltd.In Stock: 1173DF3A-10P-2DS Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DF3A-10P-2DS(80) is based on alignment of the following critical parameters:

Manufacturer Consistency: Both the main part and substitute are manufactured by Hirose Electric Co., Ltd., ensuring design compatibility and quality standards.

Category Alignment: Both components are classified as rectangular connectors, maintaining functional equivalence within the connector product family.

Electrical and Mechanical Specifications: The substitute part DF3A-10P-2DS shares the same base product number (DF3A) and connector specifications including 10-position configuration, 0.079" (2.00mm) pitch, and 3A current rating.

Compliance and Certification: Both parts maintain identical Moisture Sensitivity Level (MSL 1), ECCN classification (EAR99), and HTSUS code (8536.69.4040), ensuring regulatory and supply chain compatibility.

Product Status Advantage: The substitute part DF3A-10P-2DS carries active product status, providing assured availability and continued manufacturer support.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: DF3A-10P-2DS

The DF3A-10P-2DS is the direct equivalent for the obsolete DF3A-10P-2DS(80). This substitute maintains identical regulatory classification (ECCN EAR99, HTSUS 8536.69.4040) and moisture sensitivity specifications (MSL 1). The substitute carries active product status, ensuring continued availability and manufacturer support. Both components share the same base product number (DF3A) and are manufactured by Hirose Electric Co., Ltd., confirming design and functional compatibility.

The substitute part carries ROHS3 compliance and REACH unaffected status, meeting current environmental and regulatory requirements. The component is available in bulk packaging with 1127 pieces in current inventory stock.

Frequently Asked Questions (FAQ)

Q: Can DF3A-10P-2DS directly replace DF3A-10P-2DS(80)?

A: Yes. Both parts are manufactured by Hirose Electric Co., Ltd., share the same base product number (DF3A), and maintain identical MSL, ECCN, and HTSUS classifications. The substitute carries active product status, providing assured availability.

Q: What is the primary reason for substitution?

A: The DF3A-10P-2DS(80) is classified as obsolete. The DF3A-10P-2DS substitute maintains active product status and ensures continued component availability.

Q: Are there packaging differences between the main part and substitute?

A: The main part packaging is not specified in available documentation. The substitute part DF3A-10P-2DS is supplied in bulk packaging.

Q: Do both parts meet current environmental compliance standards?

A: The substitute part DF3A-10P-2DS is ROHS3 compliant and REACH unaffected. Both parts maintain identical MSL 1 classification and EAR99 ECCN status.

Q: What is the connector pitch specification?

A: The substitute part DF3A-10P-2DS operates at 0.079" (2.00mm) pitch with 10 positions in a single row configuration.

Q: What is the current rating for this connector?

A: The DF3A-10P-2DS substitute is rated for 3A continuous current.

Q: What mounting configuration is used?

A: The substitute part DF3A-10P-2DS is configured for through-hole, right-angle mounting with press-fit and solder termination options.