DF3-6S-2R26(05) Equivalent & Substitute Parts

Part Overview

The DF3-6S-2R26(05) is a 6-position rectangular receptacle connector manufactured by Hirose Electric Co Ltd, designed for discrete wire termination using Insulation Displacement Contact (IDC) technology. This connector features tin-plated female socket contacts rated for 26 AWG wire gauge with a 0.079" (2.00mm) pitch configuration in a single-row layout.

The DF3-6S-2R26(05) is classified as obsolete. Locating equivalent or substitute components is necessary to support legacy system maintenance, repair operations, and continued product support where this connector type remains in active use.

Substiute Parts

DF3-6S-2R26(05)

Hirose Electric Co LtdIn Stock: 804DF3-6S-2R26(05) Datasheet

Current PartRFQ

DF3-6S-2C

Hirose Electric Co LtdIn Stock: 6774DF3-6S-2C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DF3-6S-2R26(05) is determined by the following critical parameters that must remain constant:

• Series designation (DF3)
• Connector type (Receptacle)
• Number of positions (6)
• Pitch spacing (0.079" / 2.00mm)
• Contact type (Female Socket)
• Number of rows (1)
• Mounting configuration (Free Hanging / In-Line)
• Color (Black)

The DF3-6S-2C qualifies as a substitute part within the DF3 series. Both components share identical mechanical and electrical interface specifications: 6-position receptacle configuration, 2.00mm pitch, single-row layout, and free-hanging mounting. Both are manufactured by Hirose Electric Co Ltd and maintain the same base product number (DF3-6).

The primary difference between these components lies in the termination method: the DF3-6S-2R26(05) uses IDC termination for discrete wire connections, while the DF3-6S-2C is a housing-only component designed for crimp-style contact termination. This distinction affects the assembly process and contact selection but does not alter the connector's mechanical or electrical interface characteristics.

Parameter Comparison

Engineering Selection Recommendations

The DF3-6S-2C represents an active-status alternative to the obsolete DF3-6S-2R26(05). Both components maintain full mechanical and electrical compatibility within the DF3 series connector family, with identical pitch, position count, and mounting specifications.

Selection between these components depends on termination methodology requirements. The DF3-6S-2R26(05) integrates IDC termination for direct discrete wire insertion, while the DF3-6S-2C functions as a housing component requiring separate crimp-style contact procurement and assembly.

The DF3-6S-2C carries ROHS3 compliance certification, representing current regulatory alignment. Both components are rated for -55°C to 105°C operating temperature range and maintain Moisture Sensitivity Level 1 (unlimited shelf life).

Frequently Asked Questions (FAQ)

Q: Can the DF3-6S-2C directly replace the DF3-6S-2R26(05) in existing assemblies?

A: Mechanical and electrical interface compatibility is maintained. The DF3-6S-2C housing accepts the same mating connector types and maintains identical pitch and position specifications. However, termination methodology differs: the DF3-6S-2R26(05) uses IDC termination while the DF3-6S-2C requires crimp-style contacts. Assembly procedures and contact selection will differ accordingly.

Q: What is the significance of the IDC versus crimp termination difference?

A: IDC (Insulation Displacement Contact) termination in the DF3-6S-2R26(05) allows direct wire insertion without stripping insulation. Crimp termination in the DF3-6S-2C requires separate contact components and crimping tools. Both methods achieve equivalent electrical connections when properly executed.

Q: Are there packaging considerations when sourcing the DF3-6S-2C?

A: The DF3-6S-2C is supplied in bulk packaging. The DF3-6S-2R26(05) packaging specification is not provided in available documentation. Verify packaging requirements for your procurement and inventory management processes.

Q: Does the DF3-6S-2C include contacts?

A: No. The DF3-6S-2C is a housing-only component. Contacts must be procured separately and installed using crimp termination methods.

Q: What compliance certifications apply to both components?

A: Both components are RoHS compliant. The DF3-6S-2C carries ROHS3 certification. Both maintain EAR99 export classification and are REACH unaffected. Moisture Sensitivity Level is 1 (unlimited) for both components.