DF3-6S-2C(18) Equivalent & Substitute Parts

Part Overview

The DF3-6S-2C(18) is a rectangular connector housing manufactured by Hirose Electric Co Ltd, designed for 6-position applications with 2.00mm pitch. This part is classified as Obsolete and is no longer in active production. Due to its obsolete status, locating original inventory becomes increasingly difficult. The DF3-6S-2C serves as the direct functional equivalent and is the manufacturer-recommended substitute, offering identical mechanical and electrical compatibility while maintaining active product status and full availability.

Substiute Parts

DF3-6S-2C(18)

Hirose Electric Co LtdIn Stock: 1032DF3-6S-2C(18) Datasheet

Current PartRFQ

DF3-6S-2C

Hirose Electric Co LtdIn Stock: 6774DF3-6S-2C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DF3-6S-2C(18) is determined by strict equivalence across the following critical parameters:

• Connector Type & Contact Configuration: Receptacle housing with female socket contacts
• Position Count & Pitch: 6 positions at 0.079" (2.00mm) pitch
• Physical Form Factor: Single-row, free-hanging in-line mounting
• Termination Method: Crimp contact termination
• Material & Environmental Specifications: Polyamide insulation, -55°C to 105°C operating range

The DF3-6S-2C is the manufacturer-designated substitute and maintains identical specifications across all functional parameters. This part is drawn from the same DF3 series product family and provides direct mechanical and electrical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

The DF3-6S-2C is the appropriate selection for applications currently using the DF3-6S-2C(18). The substitute part maintains full functional equivalence and is manufactured by the same supplier within the same product series.

The active product status of DF3-6S-2C ensures sustained availability and supply chain reliability. The part carries ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component procurement.

No design modifications or circuit alterations are required when transitioning from the obsolete variant to the active substitute. All mechanical interfaces, electrical characteristics, and environmental operating parameters remain identical.

Frequently Asked Questions (FAQ)

Q: Can DF3-6S-2C directly replace DF3-6S-2C(18) without modification?

A: Yes. Both parts are identical in all functional specifications including connector type, position count, pitch, contact configuration, and operating temperature range. No design changes are necessary.

Q: What is the difference between DF3-6S-2C(18) and DF3-6S-2C?

A: The primary difference is product status. DF3-6S-2C(18) is obsolete, while DF3-6S-2C is active production. The active variant includes documented ROHS3 compliance and REACH status. All electrical and mechanical specifications are identical.

Q: Are there packaging differences between the two parts?

A: DF3-6S-2C(18) packaging is not specified in available documentation. DF3-6S-2C is supplied in bulk packaging. Confirm packaging requirements with your procurement process.

Q: Does the substitute part require different contact pins or mating connectors?

A: No. The DF3-6S-2C maintains the same 6-position, 2.00mm pitch configuration. Existing contact pins and mating connectors designed for DF3-6S-2C(18) are fully compatible.

Q: What compliance certifications apply to the substitute part?

A: DF3-6S-2C carries ROHS3 compliance and is REACH unaffected. These certifications meet current regulatory standards for electronic component use in regulated industries.