DF22R-5P-7.92DS(06) Equivalent & Substitute Parts

Part Overview

The DF22R-5P-7.92DS(06) is a rectangular connector header manufactured by Hirose Electric Co Ltd, classified as a connector in the EnerBee™ DF22 series. This component is currently listed as obsolete, which necessitates identification of functionally equivalent alternatives for ongoing design support and procurement requirements. The part features a 5-position configuration with 0.312" (7.92mm) pitch spacing and is designed for board-to-cable/wire applications with through-hole, right-angle mounting.

Substiute Parts

DF22R-5P-7.92DS(06)

Hirose Electric Co LtdIn Stock: 1204DF22R-5P-7.92DS(06) Datasheet

Current PartRFQ

DF22R-5P-7.92DS(53)

Hirose Electric Co LtdIn Stock: 1031DF22R-5P-7.92DS(53) Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DF22R-5P-7.92DS(06) is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Manufacturer: Hirose Electric Co Ltd
• Series: EnerBee™ DF22
• Number of Positions: 5
• Pitch - Mating: 0.312" (7.92mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole, Right Angle
• Voltage Rating: 1000VAC/DC
• Operating Temperature Range: -55°C ~ 85°C
• Moisture Sensitivity Level: 1 (Unlimited)
• ECCN Classification: EAR99
• HTSUS Code: 8536.69.4040

The substitute part DF22R-5P-7.92DS(53) maintains full electrical and mechanical compatibility with the obsolete DF22R-5P-7.92DS(06) across all critical parameters. The primary distinction is product status: the substitute is active and currently available in inventory, whereas the original part is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The DF22R-5P-7.92DS(53) is the direct equivalent substitute for the obsolete DF22R-5P-7.92DS(06). Selection of this substitute is based on the following engineering criteria:

Product Status Alignment: The substitute part maintains active product status with confirmed inventory availability (957 Pcs New Original In Stock), ensuring long-term procurement viability compared to the obsolete original part.

Regulatory Compliance: The substitute part carries ROHS3 compliance and REACH Unaffected status, meeting current environmental and regulatory requirements for electronic component procurement.

Electrical and Mechanical Equivalence: All critical electrical parameters (voltage rating, operating temperature range, moisture sensitivity level) and mechanical specifications (connector type, contact configuration, mounting method, pitch spacing) are identical between the original and substitute parts.

Export Classification: Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, ensuring consistent regulatory treatment in procurement and logistics workflows.

Frequently Asked Questions (FAQ)

Q: Can DF22R-5P-7.92DS(53) be used as a direct replacement for DF22R-5P-7.92DS(06)?

A: Yes. The substitute part maintains identical electrical and mechanical specifications across all critical parameters, including connector type, position count, pitch spacing, voltage rating, operating temperature range, and mounting configuration. The parts are functionally equivalent for board-to-cable/wire applications.

Q: What is the primary reason for substitution?

A: The original part DF22R-5P-7.92DS(06) is classified as obsolete. The substitute DF22R-5P-7.92DS(53) is an active product with current inventory availability, providing continuity for ongoing design support and procurement requirements.

Q: Are there any differences in packaging between the two parts?

A: The original part packaging is not specified in available documentation. The substitute part is supplied in bag packaging. This difference does not affect electrical or mechanical compatibility.

Q: Do both parts meet current environmental standards?

A: The substitute part DF22R-5P-7.92DS(53) carries ROHS3 compliance and REACH Unaffected status. Environmental compliance status for the original part is not specified in available documentation.

Q: Are the export classifications identical?

A: Yes. Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, ensuring consistent regulatory treatment in international procurement and logistics.

Q: What is the moisture sensitivity level for both parts?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.

Q: Are there any differences in contact specifications?

A: Both parts feature male pin contacts with gold plating. The substitute part specifies contact finish thickness of 8.00µin (0.203µm) for both mating and post surfaces, with copper alloy contact material and polyamide (PA) nylon insulation.