DF22R-2P-7.92DSA(06) Equivalent & Substitute Parts

Part Overview

The DF22R-2P-7.92DSA(06) is a rectangular connector header manufactured by Hirose Electric Co Ltd, classified as a connector header position component within the rectangular connectors category. This part is currently listed with obsolete product status. The DF22R-2P-7.92DSA(06) operates within the EnerBee™ DF22 series and is subject to ROHS3 compliance requirements. Due to its obsolete status, identification of active equivalent parts is necessary to ensure continued availability and supply chain continuity for applications requiring this connector specification.

Substiute Parts

DF22R-2P-7.92DSA(06)

Hirose Electric Co LtdIn Stock: 1182DF22R-2P-7.92DSA(06) Datasheet

Current PartRFQ

DF22R-2P-7.92DSA(53)

Hirose Electric Co LtdIn Stock: 1465DF22R-2P-7.92DSA(53) Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DF22R-2P-7.92DSA(06) is based on alignment of the following critical parameters within the EnerBee™ DF22 series:

Substitution Criteria:

• Identical manufacturer (Hirose Electric Co Ltd)
• Identical series designation (EnerBee™ DF22)
• Identical rectangular connector category
• Matching electrical specifications (voltage rating, current capacity parameters)
• Matching mechanical specifications (pitch, number of positions, mounting type)
• Equivalent or superior product status (active status preferred over obsolete)
• Compliance with applicable regulatory standards (ROHS3, REACH, ECCN)
• Identical moisture sensitivity level (MSL 1)

The substitute part DF22R-2P-7.92DSA(53) maintains full compatibility with the original part specification while offering the advantage of active product status and confirmed current inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The DF22R-2P-7.92DSA(53) is a direct functional equivalent to the DF22R-2P-7.92DSA(06). Both parts share identical electrical and mechanical specifications, including pitch, number of positions, contact materials, operating temperature range, voltage rating, and compliance certifications.

The primary distinction between these parts is product status: the DF22R-2P-7.92DSA(06) carries obsolete designation, while the DF22R-2P-7.92DSA(53) maintains active product status. Both parts maintain ROHS3 compliance and identical moisture sensitivity levels. The substitute part is supplied in bag packaging and demonstrates higher current inventory levels (1412 units versus 1093 units).

For new designs or applications requiring long-term supply assurance, the DF22R-2P-7.92DSA(53) is the appropriate selection. For existing applications currently utilizing the DF22R-2P-7.92DSA(06), direct substitution with the DF22R-2P-7.92DSA(53) is electrically and mechanically compatible without design modification.

Frequently Asked Questions (FAQ)

Q: Are the DF22R-2P-7.92DSA(06) and DF22R-2P-7.92DSA(53) electrically interchangeable?

A: Yes. Both parts operate at identical voltage ratings (1000VAC/DC), share the same contact materials (copper alloy with gold finish), and support identical current capacity parameters based on wire gauge. Operating temperature ranges are identical (-55°C to 85°C).

Q: What is the significance of the different part number suffixes (06 versus 53)?

A: The suffix designates the packaging configuration or manufacturing revision. The DF22R-2P-7.92DSA(53) is supplied in bag packaging, while the DF22R-2P-7.92DSA(06) packaging is not specified. Both parts are from the same EnerBee™ DF22 series and maintain identical connector specifications.

Q: Can the DF22R-2P-7.92DSA(53) be used as a direct replacement in existing assemblies?

A: Yes. The substitute part maintains identical mechanical dimensions, pitch (0.312" / 7.92mm), number of positions (2), mounting type (through hole), and termination method (solder). No PCB redesign or assembly process modification is required.

Q: Why is the DF22R-2P-7.92DSA(06) listed as obsolete?

A: Obsolete status indicates the part is no longer in active production. The DF22R-2P-7.92DSA(53) represents the current active equivalent within the same series, ensuring continued availability and support.

Q: Are there compliance differences between these parts?

A: No. Both parts maintain identical ROHS3 compliance, REACH unaffected status, EAR99 ECCN classification, and UL94 V-0 flammability rating. Moisture sensitivity levels are identical (MSL 1 - Unlimited).

Q: What is the contact finish specification for both parts?

A: Both parts feature gold-plated contacts on mating surfaces with 8.00µin (0.203µm) thickness. Contact material is copper alloy for both parts. Post contact finish is also gold with identical thickness specification.

Q: Are the insulation materials identical?

A: Yes. Both parts utilize polyamide (PA) nylon insulation material in black color. Insulation height is 0.713" (18.10mm) for the substitute part, with identical shrouding configuration (shrouded 4-wall design).