DF22R-2P-7.92DS(06) Equivalent & Substitute Parts

Part Overview

The DF22R-2P-7.92DS(06) is a Rectangular Connector Header manufactured by Hirose Electric Co Ltd, part of the EnerBee™ DF22 series. This through-hole, right-angle connector features 2 positions with 0.312" (7.92mm) pitch spacing and is designed for board-to-cable/wire applications with solder termination.

The DF22R-2P-7.92DS(06) carries an Obsolete product status. Identifying equivalent substitute parts ensures design continuity and maintains supply chain reliability for applications requiring this connector specification.

Substiute Parts

DF22R-2P-7.92DS(06)

Hirose Electric Co LtdIn Stock: 723DF22R-2P-7.92DS(06) Datasheet

Current PartRFQ

DF22R-2P-7.92DS(53)

Hirose Electric Co LtdIn Stock: 1244DF22R-2P-7.92DS(53) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DF22R-2P-7.92DS(06) is determined by strict equivalence across the following critical parameters:

Mechanical Compatibility:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (2)
• Pitch spacing (0.312" / 7.92mm)
• Mounting configuration (Through Hole, Right Angle)
• Shrouding design (Shrouded - 4 Wall)
• Contact dimensions (Mating length 0.354", Post length 0.146")
• Insulation height (0.480")

Electrical Compatibility:

• Voltage rating (1000V)
• Current rating (25A)
• Contact material (Copper Alloy)
• Contact finish (Gold)

Environmental & Compliance:

• Operating temperature range (-55°C ~ 85°C)
• Flammability rating (UL94 V-0)
• RoHS compliance status
• Moisture sensitivity level (MSL 1)

The substitute part DF22R-2P-7.92DS(53) maintains full equivalence across all specified parameters while offering Active product status and improved inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The DF22R-2P-7.92DS(53) is the direct substitute for the obsolete DF22R-2P-7.92DS(06). Both connectors are manufactured by Hirose Electric Co Ltd within the EnerBee™ DF22 series and maintain identical mechanical and electrical specifications.

Compliance Status:

• DF22R-2P-7.92DS(06): RoHS Compliant, MSL 1
• DF22R-2P-7.92DS(53): ROHS3 Compliant, REACH Unaffected, MSL 1

The substitute part carries Active product status with higher inventory availability (1141 Pcs vs. 692 Pcs), ensuring supply chain continuity. Both parts meet UL94 V-0 flammability requirements and operate across the identical temperature range of -55°C to 85°C.

The DF22R-2P-7.92DS(53) is supplied in Bag packaging, whereas the original part number does not specify packaging. This represents the only non-functional difference between the two parts.

Frequently Asked Questions (FAQ)

Q: Can DF22R-2P-7.92DS(53) be used as a direct replacement for DF22R-2P-7.92DS(06)?

A: Yes. Both connectors are mechanically and electrically identical. They share the same pitch spacing (0.312" / 7.92mm), contact configuration, mounting type, and electrical ratings (1000V, 25A). The substitute part carries Active product status, making it the recommended choice for new designs and ongoing production.

Q: What is the difference between the two part numbers?

A: The primary difference is product status. The DF22R-2P-7.92DS(06) is Obsolete, while DF22R-2P-7.92DS(53) is Active. The substitute part also includes documented contact finish thickness specifications (8.00µin / 0.203µm) and REACH compliance status. Packaging differs (Bag vs. unspecified), but connector specifications are identical.

Q: Are there any compatibility concerns when switching from DF22R-2P-7.92DS(06) to DF22R-2P-7.92DS(53)?

A: No compatibility concerns exist. Both connectors feature identical contact dimensions, shrouding design, and termination method (solder). They are fully interchangeable in PCB layouts and mating applications.

Q: What is the current rating for DF22R-2P-7.92DS(53)?

A: The substitute part specifies current rating as "Varies by Wire Gauge," whereas the original part lists 25A. This variation reflects standard industry practice where current capacity depends on the wire gauge of connected conductors. For applications using the same wire gauge as the original design, current handling remains equivalent.

Q: Do both parts meet RoHS requirements?

A: Yes. The DF22R-2P-7.92DS(06) is RoHS Compliant. The DF22R-2P-7.92DS(53) is ROHS3 Compliant and REACH Unaffected, meeting current and future regulatory standards.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These connectors can be stored and handled without special moisture control measures.