DF22L-5P-7.92DSA(06) Equivalent & Substitute Parts

Part Overview

The DF22L-5P-7.92DSA(06) is a rectangular connector header manufactured by Hirose Electric Co Ltd, classified as a connector header position component within the rectangular connectors category. This part is currently listed with obsolete product status. The DF22L-5P-7.92DSA(06) belongs to the EnerBee™ DF22 series and is designed for board-to-cable/wire applications with through-hole mounting configuration.

Due to the obsolete status of the DF22L-5P-7.92DSA(06), identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production and repair applications. The substitute part DF22L-5P-7.92DSA(53) is available as an active product alternative.

Substiute Parts

DF22L-5P-7.92DSA(06)

Hirose Electric Co LtdIn Stock: 1170DF22L-5P-7.92DSA(06) Datasheet

Current PartRFQ

DF22L-5P-7.92DSA(53)

Hirose Electric Co LtdIn Stock: 1073DF22L-5P-7.92DSA(53) Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part DF22L-5P-7.92DSA(53) is classified as an equivalent alternative based on the following substitution criteria:

Matching Parameters:

• Identical manufacturer: Hirose Electric Co Ltd
• Identical series designation: EnerBee™ DF22
• Identical connector pitch: 0.312" (7.92mm)
• Identical number of positions: 5
• Identical connector type: Header
• Identical contact type: Male Pin
• Identical mounting type: Through Hole
• Identical termination method: Solder
• Identical fastening type: Latch Holder
• Identical shrouding configuration: Shrouded - 4 Wall
• Identical style: Board to Cable/Wire
• Identical contact material: Copper Alloy
• Identical insulation material: Polyamide (PA), Nylon
• Identical voltage rating: 1000VAC/DC
• Identical operating temperature range: -55°C ~ 85°C
• Identical contact finish: Gold
• Identical RoHS compliance: ROHS3 Compliant
• Identical REACH status: REACH Unaffected
• Identical ECCN classification: EAR99
• Identical HTSUS code: 8536.69.4040

The primary distinction between these parts is the product status: DF22L-5P-7.92DSA(06) is obsolete, while DF22L-5P-7.92DSA(53) maintains active product status with current manufacturing availability.

Parameter Comparison

Engineering Selection Recommendations

The DF22L-5P-7.92DSA(53) is the direct equivalent substitute for the obsolete DF22L-5P-7.92DSA(06). Both components share identical electrical specifications, mechanical dimensions, and compliance certifications. The DF22L-5P-7.92DSA(53) maintains active product status with current manufacturing support from Hirose Electric Co Ltd.

Selection of the DF22L-5P-7.92DSA(53) is appropriate for new designs and production applications requiring the EnerBee™ DF22 series rectangular connector header with 5-position, 0.312" pitch configuration. Both parts satisfy ROHS3 compliance requirements and carry identical MSL classification of 1 (Unlimited), indicating no moisture sensitivity constraints during storage and handling.

The electrical performance characteristics, including 1000VAC/DC voltage rating and -55°C to 85°C operating temperature range, are identical between the main part and substitute. Contact geometry, material composition, and finish specifications remain unchanged, ensuring mechanical and electrical compatibility in board-to-cable/wire applications with through-hole mounting.

Frequently Asked Questions (FAQ)

Q: Can DF22L-5P-7.92DSA(53) be used as a direct replacement for DF22L-5P-7.92DSA(06)?

A: Yes. The DF22L-5P-7.92DSA(53) is a direct equivalent substitute. All electrical parameters, mechanical dimensions, contact specifications, and compliance certifications are identical between the two parts. The primary difference is product status: DF22L-5P-7.92DSA(06) is obsolete while DF22L-5P-7.92DSA(53) is active.

Q: What are the key parameters that define substitution compatibility for this connector?

A: Substitution compatibility is determined by: connector pitch (0.312"), number of positions (5), connector type (Header), contact type (Male Pin), mounting type (Through Hole), termination method (Solder), shrouding configuration (Shrouded - 4 Wall), contact material (Copper Alloy), insulation material (Polyamide/Nylon), voltage rating (1000VAC/DC), and operating temperature range (-55°C ~ 85°C).

Q: Are there any differences in packaging between these parts?

A: The DF22L-5P-7.92DSA(06) packaging information is not specified in the available data. The DF22L-5P-7.92DSA(53) is supplied in Bag packaging. Packaging differences do not affect electrical or mechanical compatibility.

Q: Do both parts meet the same compliance standards?

A: Yes. Both DF22L-5P-7.92DSA(06) and DF22L-5P-7.92DSA(53) are ROHS3 Compliant, REACH Unaffected, classified as EAR99 for export control purposes, and carry identical HTSUS code 8536.69.4040. Both parts have MSL rating of 1 (Unlimited).

Q: What is the voltage and temperature rating for this connector?

A: The connector is rated for 1000VAC/DC voltage operation across an operating temperature range of -55°C to 85°C. These specifications apply to both the main part and substitute.

Q: Is the contact finish specification the same for both parts?

A: Yes. Both parts feature gold contact finish on mating surfaces with 8.00µin (0.203µm) thickness and gold contact finish on posts with 8.00µin (0.203µm) thickness.