DF22L-4P-7.92DSA(06) Equivalent & Substitute Parts

Part Overview

The DF22L-4P-7.92DSA(06) is a rectangular connector header manufactured by Hirose Electric Co Ltd, classified as a connector header position component within the rectangular connectors category. This part is currently listed with obsolete product status. The DF22L-4P-7.92DSA(06) operates within the EnerBee™ DF22 series and carries MSL Level 1 (Unlimited) moisture sensitivity rating.

Due to the obsolete status of the DF22L-4P-7.92DSA(06), identification of active equivalent parts is necessary to ensure continued availability and supply chain continuity for applications requiring this connector specification.

Substiute Parts

DF22L-4P-7.92DSA(06)

Hirose Electric Co LtdIn Stock: 984DF22L-4P-7.92DSA(06) Datasheet

Current PartRFQ

DF22L-4P-7.92DSA(53)

Hirose Electric Co LtdIn Stock: 889DF22L-4P-7.92DSA(53) Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The DF22L-4P-7.92DSA(53) is identified as a direct substitute for the DF22L-4P-7.92DSA(06). Both parts share the following critical parameters that establish substitution compatibility:

Substitution-Determining Parameters:

• Manufacturer: Hirose Electric Co Ltd (identical)
• Series: EnerBee™ DF22 (identical)
• Pitch - Mating: 0.312" (7.92mm) (identical)
• Number of Positions: 4 (identical)
• Number of Rows: 1 (identical)
• Connector Type: Header (identical)
• Contact Type: Male Pin (identical)
• Mounting Type: Through Hole (identical)
• Termination: Solder (identical)
• Voltage Rating: 1000VAC/DC (identical)
• Moisture Sensitivity Level (MSL): 1 (Unlimited) (identical)
• ECCN: EAR99 (identical)
• HTSUS: 8536.69.4040 (identical)

The primary distinction between these parts is product status: the DF22L-4P-7.92DSA(06) is obsolete, while the DF22L-4P-7.92DSA(53) maintains active product status with current inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The DF22L-4P-7.92DSA(53) is the direct substitute for the DF22L-4P-7.92DSA(06). Selection of the DF22L-4P-7.92DSA(53) is supported by the following factors:

Product Status: The DF22L-4P-7.92DSA(06) carries obsolete status, whereas the DF22L-4P-7.92DSA(53) maintains active product status with confirmed current inventory of 808 pieces.

Regulatory Compliance: The DF22L-4P-7.92DSA(53) carries ROHS3 compliance and REACH Unaffected status, meeting current environmental and regulatory requirements. Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Electrical and Mechanical Specifications: Both parts maintain identical electrical ratings (1000VAC/DC voltage rating), identical MSL Level 1 (Unlimited) moisture sensitivity, and identical connector architecture (4-position, 0.312" pitch, through-hole solder termination, male pin header).

Packaging: The DF22L-4P-7.92DSA(53) is supplied in bag packaging, suitable for standard component handling and storage protocols.

Frequently Asked Questions (FAQ)

Q: What is the primary reason for substituting the DF22L-4P-7.92DSA(06)?

A: The DF22L-4P-7.92DSA(06) carries obsolete product status. The DF22L-4P-7.92DSA(53) is the active equivalent part with current manufacturing and inventory support.

Q: Are the electrical specifications identical between these two parts?

A: Yes. Both parts carry identical voltage ratings (1000VAC/DC), identical MSL Level 1 (Unlimited) moisture sensitivity, and identical connector architecture specifications including pitch, position count, and termination method.

Q: What are the key mechanical parameters that establish substitution compatibility?

A: Substitution compatibility is established through identical parameters: 4-position configuration, 0.312" (7.92mm) mating pitch, single-row layout, through-hole mounting, solder termination, and male pin contact type. Both parts belong to the EnerBee™ DF22 series manufactured by Hirose Electric Co Ltd.

Q: Does the DF22L-4P-7.92DSA(53) meet current regulatory requirements?

A: Yes. The DF22L-4P-7.92DSA(53) is ROHS3 compliant and carries REACH Unaffected status. Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: What is the difference in packaging between these parts?

A: The DF22L-4P-7.92DSA(06) packaging information is not specified in available data. The DF22L-4P-7.92DSA(53) is supplied in bag packaging.

Q: Are there any differences in contact specifications?

A: The DF22L-4P-7.92DSA(53) specifies contact details including gold finish (8.00µin/0.203µm thickness on both mating and post surfaces), square contact shape, and copper alloy contact material. The DF22L-4P-7.92DSA(06) contact specifications are not provided in available documentation.

Q: What is the operating temperature range for the substitute part?

A: The DF22L-4P-7.92DSA(53) operates across -55°C to 85°C temperature range with UL94 V-0 material flammability rating.