DF22L-3P-7.92DS Equivalent & Substitute Parts

Part Overview

The DF22L-3P-7.92DS is a rectangular connector header manufactured by Hirose Electric Co Ltd, part of the EnerBee™ DF22 series. This through-hole, right-angle connector features 3 positions with 0.312" (7.92mm) pitch spacing and is designed for board-to-cable/wire applications. The main part (DF22L-3P-7.92DS(06)) is classified as obsolete, making identification of active equivalent parts essential for ongoing production and maintenance applications.

Substiute Parts

DF22L-3P-7.92DS(06)

Hirose Electric Co LtdIn Stock: 1180DF22L-3P-7.92DS(06) Datasheet

Current PartRFQ

DF22L-3P-7.92DS(53)

Hirose Electric Co LtdIn Stock: 1482DF22L-3P-7.92DS(53) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DF22L-3P-7.92DS(06) is based on strict electrical and mechanical parameter matching within the EnerBee™ DF22 series. The substitute part DF22L-3P-7.92DS(53) maintains identical specifications across all critical parameters:

• Connector type, contact type, and position count
• Pitch spacing (0.312" / 7.92mm)
• Mounting configuration (through hole, right angle)
• Shrouding design (4 wall)
• Voltage rating (1000V)
• Material flammability rating (UL94 V-0)
• Contact geometry and finish specifications

The primary distinction is product status: the original part is obsolete, while the substitute is active. Both parts are RoHS compliant and share identical mechanical interfaces, allowing direct substitution in applications requiring the DF22L-3P-7.92DS footprint and electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

The DF22L-3P-7.92DS(53) is the direct active equivalent for the obsolete DF22L-3P-7.92DS(06). Selection of the substitute part is based on:

• Identical mechanical and electrical specifications across all critical parameters
• Active product status ensuring ongoing availability and supply chain continuity
• Enhanced compliance certification (ROHS3 vs. RoHS Compliant)
• Extended lower operating temperature range (-55°C vs. -35°C minimum)
• Equivalent regulatory classification (EAR99, HTSUS 8536.69.4040)

Both parts meet UL94 V-0 flammability requirements and maintain identical contact geometry, pitch spacing, and voltage ratings. The substitute part is suitable for direct replacement in all applications previously specified for the main part.

Frequently Asked Questions (FAQ)

Q: Can DF22L-3P-7.92DS(53) be used as a direct replacement for DF22L-3P-7.92DS(06)?

A: Yes. Both parts share identical connector type, position count, pitch spacing, mounting configuration, and electrical ratings. The substitute is the active equivalent of the obsolete main part.

Q: What is the difference in operating temperature range?

A: The substitute part operates from -55°C to 85°C, compared to -35°C to 85°C for the main part. This extended lower temperature range provides additional operational margin in cold environments.

Q: Are there packaging differences between these parts?

A: The main part packaging is not specified. The substitute part is supplied in bag packaging. Verify packaging requirements for your application.

Q: Do both parts meet the same compliance standards?

A: Both parts are RoHS compliant and meet UL94 V-0 flammability requirements. The substitute carries ROHS3 certification, representing current compliance status. Both are classified as EAR99 and share identical HTSUS codes.

Q: What is the current rating for these connectors?

A: The main part is rated for 25A. The substitute part current rating varies by wire gauge. Consult wire gauge specifications and application requirements to determine appropriate current capacity.

Q: Are these parts moisture sensitive?

A: Both parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.