DF22L-2P-7.92DS(06) Equivalent & Substitute Parts

Part Overview

The DF22L-2P-7.92DS(06) is a rectangular connector header manufactured by Hirose Electric Co Ltd, part of the EnerBee™ DF22 series. This through-hole, right-angle connector features 2 positions with 0.312" (7.92mm) pitch spacing and is designed for board-to-cable/wire applications. The part is currently obsolete, making identification of active equivalent models essential for ongoing procurement and design continuity.

Substiute Parts

DF22L-2P-7.92DS(06)

Hirose Electric Co LtdIn Stock: 1213DF22L-2P-7.92DS(06) Datasheet

Current PartRFQ

DF22L-2P-7.92DS(53)

Hirose Electric Co LtdIn Stock: 904DF22L-2P-7.92DS(53) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the DF22L-2P-7.92DS(06) is determined by the following critical parameters:

• Connector type, contact type, and series compatibility (Header, Male Pin, EnerBee™ DF22)
• Mating pitch and position count (0.312" / 7.92mm, 2 positions)
• Mounting configuration (Through Hole, Right Angle)
• Shrouding design (Shrouded - 4 Wall)
• Electrical ratings (1000V, current capacity)
• Termination method (Solder)
• Material compliance (UL94 V-0, RoHS)

The substitute part DF22L-2P-7.92DS(53) maintains identical mechanical and electrical specifications while offering active product status and extended temperature range capability.

Parameter Comparison

Engineering Selection Recommendations

The DF22L-2P-7.92DS(53) is the direct active equivalent for the obsolete DF22L-2P-7.92DS(06). Both parts share identical mechanical dimensions, contact configurations, and electrical ratings. The substitute part offers the following advantages:

• Active product status ensures ongoing availability and manufacturing support
• Extended operating temperature range (-55°C to 85°C versus -35°C to 85°C) provides broader environmental compatibility
• ROHS3 compliance supersedes the RoHS Compliant status of the original part
• REACH Unaffected designation provides additional regulatory clarity
• Identical shrouding, termination, and contact finish specifications ensure direct mechanical and electrical interchangeability

Frequently Asked Questions (FAQ)

Q: Can DF22L-2P-7.92DS(53) be used as a direct replacement for DF22L-2P-7.92DS(06)?

A: Yes. Both parts are mechanically and electrically identical. The substitute maintains the same 2-position, 0.312" pitch header configuration, shrouding design, solder termination, and 1000V rating. The only differences are product status (active versus obsolete) and extended temperature range in the substitute.

Q: What is the difference between the packaging specifications?

A: The original part DF22L-2P-7.92DS(06) has no specified packaging designation, while DF22L-2P-7.92DS(53) is packaged in bags. This difference does not affect electrical or mechanical compatibility.

Q: Does the extended temperature range of DF22L-2P-7.92DS(53) affect compatibility?

A: No. The substitute's extended lower temperature limit (-55°C versus -35°C) is a superset of the original specification. Applications operating within the original -35°C to 85°C range will function identically in both parts.

Q: Are the contact finishes identical between the two parts?

A: The mating contact finish is identical (Gold, 8.00µin thickness) in both parts. The substitute specifies Gold finish with 8.00µin thickness for the post contact, while the original does not specify post contact finish. This addition does not affect compatibility.

Q: What compliance certifications apply to the substitute part?

A: DF22L-2P-7.92DS(53) carries ROHS3 Compliant and REACH Unaffected designations, providing current regulatory compliance. Both parts maintain UL94 V-0 flammability rating and MSL 1 (Unlimited) moisture sensitivity level.