DF22-5P-7.92DSA(06) Equivalent & Substitute Parts

Part Overview

The DF22-5P-7.92DSA(06) is a rectangular connector header manufactured by Hirose Electric Co Ltd, classified as a connector header position component. This part is currently listed with obsolete product status. Due to its obsolete classification, identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements. The substitute part maintains functional compatibility while offering active product status and improved inventory availability.

Substiute Parts

DF22-5P-7.92DSA(06)

Hirose Electric Co LtdIn Stock: 1005DF22-5P-7.92DSA(06) Datasheet

Current PartRFQ

DF22-5P-7.92DSA(53)

Hirose Electric Co LtdIn Stock: 1299DF22-5P-7.92DSA(53) Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The DF22-5P-7.92DSA(53) qualifies as a direct substitute for the DF22-5P-7.92DSA(06) based on the following critical parameters:

Matching Electrical and Mechanical Specifications:

• Identical manufacturer: Hirose Electric Co Ltd
• Same connector category: Rectangular Connectors
• Identical pitch specification: 0.312" (7.92mm)
• Same number of positions: 5
• Identical connector type: Header
• Same contact type: Male Pin
• Identical mounting type: Through Hole
• Same termination method: Solder
• Identical voltage rating: 1000VAC/DC
• Same operating temperature range: -55°C ~ 85°C

Compliance and Regulatory Alignment:

• Identical MSL rating: 1 (Unlimited)
• Same ECCN classification: EAR99
• Identical HTSUS code: 8536.69.4040
• Both comply with RoHS3 and REACH requirements

The substitute part belongs to the EnerBee™ DF22 series and maintains active product status, providing superior supply chain continuity compared to the obsolete main part.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: DF22-5P-7.92DSA(53)

The DF22-5P-7.92DSA(53) is the direct substitute for the DF22-5P-7.92DSA(06). Selection of this substitute part is based on the following engineering criteria:

Product Status Alignment: The substitute part maintains active product status, ensuring long-term availability and continued manufacturer support. The main part's obsolete classification creates supply chain risk and limits access to new inventory.

Regulatory and Compliance Compliance: Both parts share identical MSL ratings (1 - Unlimited), ECCN classification (EAR99), and HTSUS codes (8536.69.4040). The substitute part provides explicit RoHS3 compliance and REACH unaffected status, meeting current regulatory requirements.

Electrical and Mechanical Compatibility: The substitute part maintains identical electrical specifications including voltage rating (1000VAC/DC) and operating temperature range (-55°C ~ 85°C). Mechanical parameters including pitch (0.312"/7.92mm), position count (5), connector type (header), contact type (male pin), and mounting method (through hole solder) are identical.

Functional Equivalence: Both parts are rectangular connectors within the same category, with matching termination methods and fastening approaches. The substitute part's inclusion of board guide and board lock features provides enhanced mechanical stability without compromising compatibility.

Frequently Asked Questions (FAQ)

Q: Can the DF22-5P-7.92DSA(53) be used as a direct replacement for the DF22-5P-7.92DSA(06)?

A: Yes. The DF22-5P-7.92DSA(53) is a direct substitute. Both parts share identical pitch (0.312"/7.92mm), position count (5), connector type (header), contact type (male pin), mounting method (through hole), and termination (solder). Electrical specifications including voltage rating (1000VAC/DC) and operating temperature range (-55°C ~ 85°C) are identical.

Q: What is the primary reason for substitution?

A: The DF22-5P-7.92DSA(06) carries obsolete product status, creating supply chain constraints. The DF22-5P-7.92DSA(53) maintains active status with higher inventory availability (1264 Pcs vs. 963 Pcs), ensuring reliable procurement.

Q: Are there compliance differences between the two parts?

A: No compliance differences exist. Both parts share identical MSL ratings (1 - Unlimited) and ECCN classification (EAR99). The substitute part provides explicit RoHS3 compliance and REACH unaffected status documentation.

Q: What packaging format is available for the substitute part?

A: The DF22-5P-7.92DSA(53) is supplied in bag packaging, suitable for standard component handling and storage procedures.

Q: Are the mechanical dimensions compatible?

A: Yes. The substitute part maintains identical mating pitch (0.312"/7.92mm), contact length specifications (mating: 0.354"/9.00mm, post: 0.146"/3.70mm), and insulation height (0.713"/18.10mm). Both parts use square contact geometry with gold finish (8.00µin/0.203µm thickness).

Q: What additional features does the substitute part provide?

A: The DF22-5P-7.92DSA(53) includes board guide and board lock features, providing enhanced mechanical retention and alignment during mating operations. These features do not affect electrical compatibility or physical interchangeability.

Q: Are the contact materials identical?

A: Yes. Both parts utilize copper alloy contacts with gold finish on both mating and post surfaces. Contact finish thickness is 8.00µin (0.203µm) on both surfaces.

Q: What is the operating temperature range for the substitute part?

A: The operating temperature range is -55°C to 85°C, identical to the main part specification.