DF1E-2022PCF Equivalent & Substitute Parts

Part Overview

The DF1E-2022PCF is a pin contact manufactured by Hirose Electric Co Ltd, designed for rectangular connector applications. This component is a crimp-style pin contact rated for 20-22 AWG wire gauges with tin finish. The part maintains Active product status and is RoHS Compliant with MSL 1 (Unlimited) rating, indicating suitability for standard storage and handling conditions without moisture sensitivity constraints.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling functional interchangeability in connector assemblies where wire gauge, termination method, and contact finish requirements match.

Substiute Parts

DF1E-2022PCF

Hirose Electric Co LtdIn Stock: 876DF1E-2022PCF Datasheet

Current PartRFQ

0500398100

MolexIn Stock: 325570500398100 Datasheet

MFR RecommendedRFQ

170-101-170L002

NorComp Inc.In Stock: 988170-101-170L002 Datasheet

MFR RecommendedRFQ

D02-22-26P-PKG100

JAE ElectronicsIn Stock: 10397D02-22-26P-PKG100 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DF1E-2022PCF are evaluated based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

• Contact Termination: Crimp (all substitutes must use crimp termination)
• Wire Gauge Range: 20-22 AWG (acceptable range for the application)
• Contact Finish: Tin or equivalent conductive finish
• Product Status: Active (ensuring ongoing availability and support)
• RoHS Compliance: Required for regulatory alignment

Substitution Logic: The identified substitute parts share the crimp termination method and operate within compatible wire gauge specifications. All substitutes maintain Active product status and RoHS compliance, ensuring regulatory and operational consistency with the main part.

Parameter Comparison

Engineering Selection Recommendations

0500398100 (Molex Mizu-P25 Waterproof Series): This substitute maintains exact wire gauge compatibility (20-22 AWG) and crimp termination with the main part. The socket contact configuration and tin finish provide direct functional equivalence. Both parts carry Active status, RoHS compliance, and MSL 1 rating, ensuring regulatory and operational alignment.

170-101-170L002 (NorComp D-Sub Series): This part operates within an extended wire gauge range (24-28 AWG) and uses crimp termination. The gold finish and D-Sub connector category represent a different connector form factor. Active product status and ROHS3 compliance are maintained. Wire gauge variance requires verification for specific application requirements.

D02-22-26P-PKG100 (JAE Electronics D02 Series): This substitute functions within a narrower wire gauge range (26-28 AWG) with crimp termination and gold finish. Active product status and ROHS3 compliance are confirmed. The wire gauge specification differs from the main part and requires application-specific validation.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0500398100 directly replace the DF1E-2022PCF? A: The Molex part shares identical wire gauge (20-22 AWG) and crimp termination specifications. The socket contact configuration is compatible with pin contacts in mated connector assemblies. Both parts maintain Active status and equivalent compliance ratings.

Q: What is the significance of wire gauge differences in the NorComp and JAE substitutes? A: Wire gauge determines the contact's current-carrying capacity and mechanical fit within the connector housing. The NorComp part (24-28 AWG) and JAE part (26-28 AWG) operate outside the main part's 20-22 AWG specification. Application-specific validation is required to confirm suitability.

Q: How do contact finish differences affect substitution? A: The main part uses tin finish, while NorComp and JAE substitutes use gold finish. Both finishes provide corrosion resistance and conductivity. Contact finish selection depends on application requirements for signal integrity and environmental exposure.

Q: Are all substitutes RoHS compliant? A: Yes. The main part is RoHS Compliant, and all identified substitutes are ROHS3 Compliant or RoHS Compliant, ensuring regulatory consistency across component selection.

Q: What packaging considerations apply to these substitutes? A: The main part is supplied in Tape & Reel (TR) packaging. Substitutes are supplied in Bulk packaging. Packaging format may affect procurement, handling, and integration into assembly processes.