DF13-6P-1.25DSA(75) Equivalent & Substitute Parts

Part Overview

The DF13-6P-1.25DSA(75) is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole mounting in board-to-cable/wire applications. This connector features 6 positions with 0.049" (1.25mm) pitch, shrouded 4-wall construction, and solder termination with detent lock fastening. The part is currently listed as obsolete, making identification of active equivalent parts essential for ongoing design support and procurement.

Substiute Parts

DF13-6P-1.25DSA(75)

Hirose Electric Co LtdIn Stock: 761DF13-6P-1.25DSA(75) Datasheet

Current PartRFQ

DF13-6P-1.25DSA(25)

Hirose Electric Co LtdIn Stock: 1068DF13-6P-1.25DSA(25) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DF13-6P-1.25DSA(75) is determined by strict equivalence across the following critical parameters:

• Connector series: DF13
• Number of positions: 6
• Mating pitch: 0.049" (1.25mm)
• Contact type: Male Pin
• Mounting type: Through Hole
• Shrouding configuration: Shrouded - 4 Wall
• Termination method: Solder
• Fastening type: Detent Lock
• Current rating: 1A per contact
• Voltage rating: 150V
• Operating temperature range: -35°C ~ 85°C
• Material flammability: UL94 V-0
• Insulation material: Polyamide (PA), Nylon

The primary substitute DF13-6P-1.25DSA(25) maintains identical electrical and mechanical specifications while offering active product status and improved availability.

Parameter Comparison

Engineering Selection Recommendations

The DF13-6P-1.25DSA(25) is the direct functional equivalent of the DF13-6P-1.25DSA(75). Both parts share identical electrical specifications, mechanical dimensions, and material properties. The primary distinction is product status: the DF13-6P-1.25DSA(75) is obsolete, while the DF13-6P-1.25DSA(25) maintains active status with confirmed inventory availability.

The substitute part carries ROHS3 compliance, representing an updated regulatory certification relative to the original RoHS Compliant designation. Both parts maintain UL94 V-0 flammability rating and identical operating temperature ranges. The substitute is supplied in tube packaging, providing standard component handling and storage compatibility.

Frequently Asked Questions (FAQ)

Q: Are DF13-6P-1.25DSA(75) and DF13-6P-1.25DSA(25) mechanically interchangeable?

A: Yes. Both connectors share identical mating pitch (0.049"), position count (6), shrouding configuration (4-wall), contact geometry, and mounting footprint. Direct substitution is supported without PCB redesign.

Q: What is the difference between the part number suffixes (75) and (25)?

A: The suffix designates the packaging variant. The (75) suffix indicates the obsolete version, while (25) represents the active production variant. Electrical and mechanical specifications remain identical.

Q: Does the substitute part meet current regulatory requirements?

A: Yes. The DF13-6P-1.25DSA(25) carries ROHS3 compliance and maintains UL94 V-0 flammability certification, meeting current regulatory standards for electronic component applications.

Q: Are there any current rating differences between the two parts?

A: Both parts support 1A per contact at 150V. The substitute documentation explicitly states "1A per Contact," providing equivalent current handling capacity.

Q: What packaging format is supplied with the substitute part?

A: The DF13-6P-1.25DSA(25) is supplied in tube packaging, standard for component distribution and automated assembly processes.