DF13-15P-1.25DSA Equivalent & Substitute Parts

Part Overview

The DF13-15P-1.25DSA is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole mounting in board-to-cable/wire applications. This 15-position connector operates at 1A per contact and 150V, with a 0.049" (1.25mm) pitch and shrouded 4-wall design. The part is currently listed as obsolete, making identification of active equivalent parts essential for ongoing production and maintenance applications.

Substiute Parts

DF13-15P-1.25DSA

Hirose Electric Co LtdIn Stock: 864DF13-15P-1.25DSA Datasheet

Current PartRFQ

DF13-15P-1.25DSA(05)

Hirose Electric Co LtdIn Stock: 1001DF13-15P-1.25DSA(05) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DF13-15P-1.25DSA is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (15)
• Pitch specification (0.049" / 1.25mm)
• Mounting method (Through Hole)
• Shrouding configuration (Shrouded - 4 Wall)
• Electrical ratings (1A per contact, 150V)
• Operating temperature range (-35°C ~ 85°C)
• Material flammability (UL94 V-0)

The DF13-15P-1.25DSA(05) variant meets all substitution criteria as an active product within the same DF13 series, maintaining identical mechanical and electrical specifications while offering improved availability.

Parameter Comparison

Engineering Selection Recommendations

The DF13-15P-1.25DSA(05) is the direct active equivalent for the obsolete DF13-15P-1.25DSA. Both parts maintain identical mechanical and electrical specifications, with the primary distinction being product status and compliance certification level. The substitute part carries ROHS3 Compliant status compared to the original RoHS Compliant designation, indicating enhanced regulatory alignment with current environmental standards. Inventory availability for the DF13-15P-1.25DSA(05) (951 Pcs) exceeds that of the obsolete variant, supporting supply chain continuity for new designs and production requirements.

Frequently Asked Questions (FAQ)

Q: Can DF13-15P-1.25DSA(05) be used as a direct replacement for DF13-15P-1.25DSA?

A: Yes. Both parts are mechanically and electrically identical, with matching pitch (1.25mm), position count (15), current rating (1A per contact), voltage rating (150V), operating temperature range (-35°C ~ 85°C), and shrouding configuration. The substitute is an active product variant within the same DF13 series.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: ROHS3 Compliant represents the current iteration of RoHS compliance standards, incorporating updated restrictions on hazardous substances. Both designations confirm the part meets lead-free and hazardous material restrictions; ROHS3 reflects the most recent regulatory framework.

Q: Are there packaging differences between these parts?

A: The original DF13-15P-1.25DSA has unspecified packaging, while DF13-15P-1.25DSA(05) is supplied in Bulk packaging. Both are suitable for through-hole assembly applications.

Q: What determines compatibility for this connector header?

A: Compatibility is determined by matching connector type (Header), contact type (Male Pin), position count (15), mating pitch (1.25mm), mounting method (Through Hole), and electrical ratings (1A per contact, 150V). The DF13-15P-1.25DSA(05) meets all these criteria.

Q: Is REACH compliance information available?

A: The DF13-15P-1.25DSA(05) carries REACH Unaffected status, indicating the part is not subject to REACH registration requirements.