DF13-10P-1.25DSA Equivalent & Substitute Parts

Part Overview

The DF13-10P-1.25DSA is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole mounting in board-to-cable/wire applications. This 10-position connector operates at 1.25mm pitch with a 1A current rating and 150V voltage rating. The part is currently listed as obsolete, making equivalent and substitute parts necessary for ongoing design support and component sourcing.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.049" (1.25mm)
Number of Positions	10
Number of Rows	1
Mounting Type	Through Hole
Shrouding	Shrouded - 4 Wall
Current Rating	1A
Voltage Rating	150V
Operating Temperature	-35°C ~ 85°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the DF13-10P-1.25DSA is determined by the following critical parameters:

Connector type (Header)
Contact type (Male Pin)
Pitch specification (0.049" / 1.25mm)
Number of positions (10)
Number of rows (1)
Mounting method (Through Hole)
Shrouding configuration (Shrouded - 4 Wall)
Termination method (Solder)
Fastening type (Detent Lock)
Contact material (Brass)
Insulation material (Polyamide/Nylon)

The substitute parts listed maintain these core electrical and mechanical parameters, ensuring functional compatibility in applications originally designed for the DF13-10P-1.25DSA.

Parameter Comparison

Parameter	DF13-10P-1.25DSA	DF13-10P-1.25DSA(05)	M30-6101046
Manufacturer	Hirose Electric Co Ltd	Hirose Electric Co Ltd	Harwin Inc.
Product Status	Obsolete	Active	Active
Connector Type	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.049" (1.25mm)	0.049" (1.25mm)	0.049" (1.25mm)
Number of Positions	10	10	10
Number of Rows	1	1	1
Mounting Type	Through Hole	Through Hole	Through Hole
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder
Fastening Type	Detent Lock	Detent Lock	Detent Lock
Contact Length - Post	0.091" (2.30mm)	0.091" (2.30mm)	0.091" (2.30mm)
Insulation Height	0.169" (4.30mm)	0.169" (4.30mm)	0.169" (4.30mm)
Contact Shape	Square	Square	Square
Contact Finish - Mating	Tin	Tin	Tin
Contact Finish - Post	Tin	Tin	Tin
Contact Material	Brass	Brass	Brass
Insulation Material	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA66), Nylon 6/6
Operating Temperature	-35°C ~ 85°C	-35°C ~ 85°C	-25°C ~ 85°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0
Current Rating	1A	1A per Contact	1A per Contact
Voltage Rating	150V	150V	100V
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

DF13-10P-1.25DSA(05) is the primary substitute for the obsolete DF13-10P-1.25DSA. Both parts are manufactured by Hirose Electric Co Ltd and share identical electrical and mechanical specifications. The DF13-10P-1.25DSA(05) is currently in active production status with ROHS3 compliance certification, making it the direct replacement for legacy designs.

M30-6101046 manufactured by Harwin Inc. is an alternative substitute that maintains mechanical compatibility and core electrical parameters. This part differs in the following specifications: operating temperature range (-25°C ~ 85°C versus -35°C ~ 85°C), voltage rating (100V versus 150V), and insulation material composition (PA66/Nylon 6/6 versus PA/Nylon). The M30-6101046 is suitable for applications where the lower operating temperature minimum and reduced voltage rating do not present design constraints.

Frequently Asked Questions (FAQ)

Q: Can DF13-10P-1.25DSA(05) be used as a direct replacement for DF13-10P-1.25DSA?

A: Yes. Both parts share identical pitch (1.25mm), position count (10), mounting type (through hole), shrouding configuration (4-wall), and electrical ratings (1A, 150V). The DF13-10P-1.25DSA(05) is the active production equivalent.

Q: What are the key differences between DF13-10P-1.25DSA(05) and M30-6101046?

A: The primary differences are voltage rating (150V versus 100V), operating temperature range (-35°C to 85°C versus -25°C to 85°C), and insulation material specification (PA/Nylon versus PA66/Nylon 6/6). Both maintain the same 1.25mm pitch, 10-position configuration, and through-hole mounting.

Q: Is the M30-6101046 suitable for all applications using DF13-10P-1.25DSA?

A: The M30-6101046 is suitable for applications where the voltage requirement does not exceed 100V and the minimum operating temperature does not fall below -25°C. Verify application requirements against these specifications before selection.

Q: What compliance certifications apply to these substitute parts?

A: DF13-10P-1.25DSA(05) carries ROHS3 compliance. M30-6101046 carries ROHS3 compliance and REACH Unaffected status. Both parts maintain UL94 V-0 flammability rating and MSL 1 (Unlimited) moisture sensitivity level.

Q: Are there packaging differences between the substitute parts?

A: DF13-10P-1.25DSA is listed with no specified packaging. DF13-10P-1.25DSA(05) and M30-6101046 are supplied in bulk packaging.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message