DF11E-8DP-2DSA Equivalent & Substitute Parts

Part Overview

The DF11E-8DP-2DSA is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole board-to-board or cable applications. This shrouded 8-position connector with 2.00mm pitch is widely used in industrial and consumer electronics requiring reliable vertical mating connections. The part is currently active in production with 1123 units in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and connector interface standards to ensure direct functional replacement in circuit designs.

Substiute Parts

DF11E-8DP-2DSA

Hirose Electric Co LtdIn Stock: 1136DF11E-8DP-2DSA Datasheet

Current PartRFQ

DF11-8DP-2DSA(08)

Hirose Electric Co LtdIn Stock: 1983DF11-8DP-2DSA(08) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DF11E-8DP-2DSA are identified based on the following critical parameters that determine functional equivalence:

Primary Matching Criteria:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (8)
• Number of rows (2)
• Pitch specification (2.00mm mating pitch and row spacing)
• Mounting method (Through Hole)
• Termination type (Solder)
• Shrouding configuration (Shrouded - 4 Wall)
• Electrical ratings (2A current, 250V voltage minimum)
• Operating temperature range (-30°C to 85°C minimum)
• Compliance standards (UL94 V-0, ROHS3)

The identified substitute DF11-8DP-2DSA(08) maintains all critical electrical and mechanical parameters, ensuring direct compatibility in circuit board layouts and mating interface applications. Additional substitutes including SWR204-NRTN-D04-ST-GA, DF11-8DP-2DSA(24), 1470109-8, and B8B-PHDSS(LF)(SN) are cross-compatible alternatives from the DF11 series or equivalent connector families meeting the same performance specifications.

Parameter Comparison

Engineering Selection Recommendations

The DF11-8DP-2DSA(08) is the primary substitute for the DF11E-8DP-2DSA, offering identical electrical performance and mechanical compatibility. Both parts maintain active production status and full compliance with ROHS3 and UL94 V-0 standards, ensuring regulatory acceptance in target applications.

Selection between the main part and substitute should be based on:

• Availability and lead time: The substitute DF11-8DP-2DSA(08) has 1933 units in stock compared to 1123 units for the main part, providing improved supply continuity.
• Packaging format: The main part is supplied in standard packaging, while the substitute is available in bulk packaging, affecting procurement and assembly workflows.
• Design validation: Both parts are functionally equivalent and require no circuit redesign or PCB layout modification.

Additional substitutes (SWR204-NRTN-D04-ST-GA, DF11-8DP-2DSA(24), 1470109-8, B8B-PHDSS(LF)(SN)) maintain the same core electrical and mechanical specifications and are suitable for applications where cross-manufacturer or variant-specific sourcing is required.

Frequently Asked Questions (FAQ)

Q: Can DF11-8DP-2DSA(08) be used as a direct replacement for DF11E-8DP-2DSA without PCB modification?

A: Yes. Both connectors share identical pitch (2.00mm), position count (8), row configuration (2), mounting method (through-hole), and electrical ratings (2A, 250V). No PCB layout changes are required.

Q: What is the difference between the main part and the substitute in terms of packaging?

A: The main part DF11E-8DP-2DSA is supplied in standard packaging, while the substitute DF11-8DP-2DSA(08) is available in bulk packaging. This affects order quantities and assembly line handling but does not impact electrical or mechanical performance.

Q: Are all listed substitutes interchangeable?

A: All listed substitutes meet the core electrical and mechanical requirements (8-position, 2.00mm pitch, 2A/250V rating, through-hole mounting, shrouded configuration). However, cross-manufacturer alternatives such as SWR204-NRTN-D04-ST-GA and B8B-PHDSS(LF)(SN) may have minor dimensional variations. Verify mating interface compatibility with corresponding receptacle connectors before final design implementation.

Q: What compliance certifications apply to substitute parts?

A: All substitute parts maintain ROHS3 compliance and UL94 V-0 flammability rating, meeting regulatory requirements for industrial and consumer electronics applications. Moisture sensitivity level remains at MSL 1 (Unlimited) across all variants.

Q: Can the DF11-8DP-2DSA(24) variant be used interchangeably?

A: Yes. The DF11-8DP-2DSA(24) variant maintains identical electrical specifications and mechanical dimensions. The numeric suffix indicates packaging or manufacturing batch designation and does not affect functional performance or compatibility.