DF11E-28DP-2DSA Equivalent & Substitute Parts

Part Overview

The DF11E-28DP-2DSA is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole board-to-board or cable applications. This 28-position connector with 2.00mm pitch provides a shrouded, detent-lock interface for reliable signal and power distribution in electronic assemblies. The part is actively stocked with 967 units available as new original inventory. Substitute parts are identified to support procurement flexibility, design revisions, and supply chain continuity while maintaining electrical and mechanical compatibility.

Substiute Parts

DF11E-28DP-2DSA

Hirose Electric Co LtdIn Stock: 1030DF11E-28DP-2DSA Datasheet

Current PartRFQ

DF11-28DP-2DSA(08)

Hirose Electric Co LtdIn Stock: 1118DF11-28DP-2DSA(08) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DF11E-28DP-2DSA is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Number of positions (28)
• Number of rows (2)
• Mating pitch (0.079" / 2.00mm)
• Row spacing (0.079" / 2.00mm)
• Mounting method (Through Hole)
• Shrouding configuration (Shrouded - 4 Wall)
• Contact type (Male Pin)
• Termination method (Solder)
• Electrical ratings (2A current, 250V voltage)
• Operating temperature range (-30°C ~ 85°C)
• Material compliance (RoHS Compliant)

The identified substitute part DF11-28DP-2DSA(08) maintains full compatibility across all these parameters, differing only in packaging designation (Bulk vs. standard packaging) and inventory status. Both parts belong to the DF11 series and are manufactured by Hirose Electric Co Ltd.

Parameter Comparison

Engineering Selection Recommendations

Both the DF11E-28DP-2DSA and DF11-28DP-2DSA(08) are active products manufactured by Hirose Electric Co Ltd and carry full RoHS compliance certification. Selection between these parts should be based on packaging requirements and inventory availability:

The DF11E-28DP-2DSA is suitable for standard procurement workflows with 967 units currently available. The DF11-28DP-2DSA(08) offers bulk packaging with higher current inventory (1021 units) and is appropriate for high-volume production runs or applications requiring bulk component handling. Both parts meet UL94 V-0 flammability requirements and MSL Level 1 moisture sensitivity specifications, making them suitable for standard assembly and storage conditions without special handling.

Frequently Asked Questions (FAQ)

Q: Can DF11-28DP-2DSA(08) be used as a direct replacement for DF11E-28DP-2DSA?

A: Yes. Both parts are electrically and mechanically equivalent. They share identical connector type, position count, pitch, row spacing, shrouding configuration, contact type, termination method, and electrical ratings. The primary difference is packaging designation (Bulk vs. standard), which does not affect functional compatibility.

Q: What does the "(08)" designation in DF11-28DP-2DSA(08) indicate?

A: The "(08)" suffix indicates a packaging variant within the DF11 series. This designation does not affect the electrical or mechanical specifications of the connector itself, only the form in which the component is supplied.

Q: Are there any temperature or voltage limitations when substituting between these parts?

A: No. Both parts operate across the identical temperature range (-30°C ~ 85°C) and voltage rating (250V) with the same current capacity (2A). Substitution does not introduce any thermal or electrical constraints.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts carry MSL Level 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard storage and handling procedures are sufficient without requiring dry-pack or desiccant storage.

Q: Are both parts RoHS compliant?

A: Yes. Both DF11E-28DP-2DSA and DF11-28DP-2DSA(08) are RoHS compliant and meet UL94 V-0 flammability requirements, suitable for applications requiring environmental and safety certifications.