DF11E-14DP-2DSA Equivalent & Substitute Parts

Part Overview

The DF11E-14DP-2DSA is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole board-to-board or cable applications. This 14-position, 2-row connector operates at 2A current rating and 250V voltage rating with a 2.00mm pitch. The part is actively stocked with 1086 units available. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when procurement requirements necessitate alternative packaging or inventory configurations.

Substiute Parts

DF11E-14DP-2DSA

Hirose Electric Co LtdIn Stock: 1171DF11E-14DP-2DSA Datasheet

Current PartRFQ

DF11-14DP-2DSA(24)

Hirose Electric Co LtdIn Stock: 2695DF11-14DP-2DSA(24) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The DF11-14DP-2DSA(24) is classified as a direct substitute for the DF11E-14DP-2DSA based on the following critical parameters:

• Identical manufacturer (Hirose Electric Co Ltd)
• Identical series designation (DF11)
• Identical connector type (Header)
• Identical number of positions (14) and rows (2)
• Identical pitch specification (0.079" / 2.00mm)
• Identical row spacing (0.079" / 2.00mm)
• Identical mounting type (Through Hole)
• Identical electrical ratings (2A current, 250V voltage)
• Identical operating temperature range (-30°C ~ 85°C)
• Identical RoHS compliance status (ROHS3 Compliant)

The primary distinction between these parts is the packaging configuration: the substitute part is supplied in Tube packaging, whereas the main part number does not specify a packaging type in the provided data.

Parameter Comparison

Engineering Selection Recommendations

Both the DF11E-14DP-2DSA and DF11-14DP-2DSA(24) are Active status products manufactured by Hirose Electric Co Ltd and maintain identical ROHS3 compliance certification. The substitute part DF11-14DP-2DSA(24) demonstrates higher inventory availability (2589 units versus 1086 units) and is supplied in Tube packaging. Selection between these parts should be based on packaging requirements and procurement lead time considerations. Both parts satisfy identical electrical, mechanical, and environmental specifications for through-hole board-to-board or cable connection applications.

Frequently Asked Questions (FAQ)

Q: Can DF11-14DP-2DSA(24) be used as a direct replacement for DF11E-14DP-2DSA?

A: Yes. Both parts share identical electrical ratings (2A, 250V), mechanical specifications (14 positions, 2 rows, 2.00mm pitch), mounting type (Through Hole), and operating temperature range (-30°C ~ 85°C). The primary difference is packaging configuration.

Q: What is the significance of the "(24)" designation in DF11-14DP-2DSA(24)?

A: The "(24)" designation indicates the packaging quantity or configuration. This part is supplied in Tube packaging, which may differ from the standard packaging of the main part number.

Q: Are both parts RoHS compliant?

A: Yes. Both DF11E-14DP-2DSA and DF11-14DP-2DSA(24) are ROHS3 Compliant.

Q: What are the key parameters that determine substitutability?

A: Substitutability is determined by: manufacturer identity, series designation, connector type, number of positions and rows, pitch specification, row spacing, mounting type, current rating, voltage rating, operating temperature range, and RoHS compliance status.

Q: Which part has better availability?

A: DF11-14DP-2DSA(24) has higher inventory availability with 2589 units in stock compared to 1086 units for DF11E-14DP-2DSA.