DF11-6DP-2DSA(30) Equivalent & Substitute Parts

Part Overview

The DF11-6DP-2DSA(30) is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for board-to-board or cable applications with a 6-position, 2-row configuration at 2.00mm pitch. This part is classified as obsolete and no longer in active production. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure component availability, and support ongoing manufacturing or repair operations for legacy systems utilizing this connector.

Substiute Parts

DF11-6DP-2DSA(30)

Hirose Electric Co LtdIn Stock: 1057DF11-6DP-2DSA(30) Datasheet

Current PartRFQ

DF11-6DP-2DSA(01)

Hirose Electric Co LtdIn Stock: 7377DF11-6DP-2DSA(01) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DF11-6DP-2DSA(30) is determined by strict equivalence across the following critical parameters:

• Base Product Series: Both parts must belong to the DF11 series
• Number of Positions: Exactly 6 positions required
• Number of Rows: Exactly 2 rows required
• Mating Pitch: Exactly 0.079" (2.00mm) pitch required
• Connector Type: Header configuration
• Mounting Type: Through Hole termination

The substitute part DF11-6DP-2DSA(01) satisfies all these criteria and represents the active production equivalent within the DF11 series. The designation difference (30 vs. 01) reflects packaging or configuration variants within the same electrical and mechanical specification set.

Parameter Comparison

Engineering Selection Recommendations

The DF11-6DP-2DSA(01) is the direct substitute for the obsolete DF11-6DP-2DSA(30). Selection of this part is based on:

• Electrical Equivalence: Identical connector configuration, pitch, and position count ensure direct functional replacement
• Mechanical Compatibility: Matching mounting type (Through Hole) and row spacing enable direct PCB integration without redesign
• Product Status: The substitute part maintains active production status with 7339 units in stock, ensuring long-term availability
• Compliance: The substitute part is ROHS3 compliant and carries EAR99 ECCN classification, meeting current regulatory requirements

No design modifications are required when transitioning from the obsolete part to the active substitute.

Frequently Asked Questions (FAQ)

Q: What is the primary difference between DF11-6DP-2DSA(30) and DF11-6DP-2DSA(01)?

A: Both parts are electrically and mechanically equivalent 6-position, 2-row headers with 2.00mm pitch. The designation suffix (30 vs. 01) indicates packaging or configuration variants. The (01) variant is the current active production part.

Q: Can DF11-6DP-2DSA(01) be used as a direct replacement in existing designs?

A: Yes. The substitute part matches all critical parameters: connector type, position count, row configuration, pitch, and mounting method. No PCB redesign or circuit modification is necessary.

Q: What is the inventory status of the substitute part?

A: DF11-6DP-2DSA(01) has 7339 units in stock as new original inventory, ensuring immediate availability for production and repair applications.

Q: Are there any compliance differences between the two parts?

A: The substitute part DF11-6DP-2DSA(01) is ROHS3 compliant and classified as REACH Unaffected. The obsolete part status does not indicate non-compliance; rather, it reflects end-of-life production status.

Q: What parameters must match for a part to be considered a valid substitute?

A: Valid substitutes must maintain identical specifications for: base product series (DF11), number of positions (6), number of rows (2), mating pitch (2.00mm), connector type (Header), and mounting type (Through Hole).