DF11-6DP-2DSA(20) Equivalent & Substitute Parts

Part Overview

The DF11-6DP-2DSA(20) is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole board-to-board or cable applications with 6 positions arranged in 2 rows at 2.00mm pitch. This part is classified as obsolete, necessitating identification of equivalent substitute components for new designs and ongoing production requirements. Active alternatives from Hirose and cross-manufacturer sources provide functional equivalency while offering improved availability and compliance status.

Substiute Parts

DF11-6DP-2DSA(20)

Hirose Electric Co LtdIn Stock: 1093DF11-6DP-2DSA(20) Datasheet

Current PartRFQ

DF11-6DP-2DSA(24)

Hirose Electric Co LtdIn Stock: 4389DF11-6DP-2DSA(24) Datasheet

DirectRFQ

1470109-6

TE Connectivity AMP ConnectorsIn Stock: 8461470109-6 Datasheet

MFR RecommendedRFQ

SWR204-NRTN-D03-ST-GA

Sullins Connector SolutionsIn Stock: 2695SWR204-NRTN-D03-ST-GA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DF11-6DP-2DSA(20) is determined by strict equivalency across the following critical parameters:

• Connector Type & Contact Configuration: Header with male pins
• Position Count & Arrangement: 6 positions in 2-row configuration
• Pitch Specifications: 0.079" (2.00mm) mating pitch and row spacing
• Mounting & Termination: Through-hole solder termination with detent lock fastening
• Shrouding: 4-wall shrouded design
• Electrical Ratings: Minimum 2A current capacity and 250V voltage rating
• Environmental Compliance: UL94 V-0 flammability rating and MSL 1 classification

All identified substitutes maintain these core parameters. Variations in contact finish thickness, insulation material composition, and specific stacking heights do not preclude functional substitution when mechanical and electrical requirements are satisfied.

Parameter Comparison

Engineering Selection Recommendations

DF11-6DP-2DSA(24) is the primary substitute for the obsolete DF11-6DP-2DSA(20). Both components are manufactured by Hirose Electric Co Ltd within the DF11 series and maintain identical electrical and mechanical specifications. The DF11-6DP-2DSA(24) is currently in active production status with significantly higher inventory availability (4370 pcs vs. 987 pcs) and achieves ROHS3 compliance, addressing regulatory requirements for new designs.

1470109-6 (TE Connectivity AMP Connectors, AMPMODU series) and SWR204-NRTN-D03-ST-GA (Sullins Connector Solutions, SWR204 series) are cross-manufacturer alternatives that satisfy core substitution criteria. Both maintain the required 6-position, 2-row configuration at 2.00mm pitch with through-hole solder termination and detent lock fastening. Both achieve ROHS3 compliance and MSL 1 classification.

Selection between cross-manufacturer alternatives depends on application voltage and current requirements. The 1470109-6 supports 100VDC at 3A per contact, while the SWR204-NRTN-D03-ST-GA supports 50V at 3A per contact. Applications requiring the original 250V rating are satisfied only by the DF11-6DP-2DSA(24).

Frequently Asked Questions (FAQ)

Q: Can the DF11-6DP-2DSA(24) directly replace the DF11-6DP-2DSA(20)?

A: Yes. Both components share identical connector type, position count, pitch, row spacing, shrouding, mounting method, and termination type. The DF11-6DP-2DSA(24) is the direct active production equivalent with improved compliance status.

Q: What are the key differences between Hirose DF11 and cross-manufacturer alternatives?

A: The DF11-6DP-2DSA(24) maintains the original 250V voltage rating and -30°C lower temperature limit. Cross-manufacturer alternatives (1470109-6 and SWR204-NRTN-D03-ST-GA) operate at reduced voltage ratings (100VDC and 50V respectively) and -25°C minimum temperature. All maintain 2A minimum current capacity and identical mechanical form factor.

Q: Are there packaging differences between substitutes?

A: The DF11-6DP-2DSA(20) and DF11-6DP-2DSA(24) differ in packaging designation (unspecified vs. Tube). The 1470109-6 and SWR204-NRTN-D03-ST-GA are supplied in Bulk packaging. Packaging does not affect connector functionality or PCB compatibility.

Q: Which substitute is recommended for new designs?

A: The DF11-6DP-2DSA(24) is recommended for new designs requiring the original electrical specifications and temperature range. For applications with reduced voltage and temperature requirements, cross-manufacturer alternatives provide equivalent mechanical compatibility with improved long-term availability.

Q: Do all substitutes meet RoHS and REACH requirements?

A: The DF11-6DP-2DSA(20) is RoHS non-compliant. All active substitutes (DF11-6DP-2DSA(24), 1470109-6, and SWR204-NRTN-D03-ST-GA) achieve ROHS3 compliance. REACH status is confirmed for DF11-6DP-2DSA(24) and SWR204-NRTN-D03-ST-GA; the 1470109-6 shows vendor-undefined REACH status.