DF11-14DP-2DSA(30) Equivalent & Substitute Parts

Part Overview

The DF11-14DP-2DSA(30) is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole board-to-board or cable applications. This connector features 14 positions arranged in 2 rows with 0.079" (2.00mm) pitch and is rated for 2A at 250V. The part is currently listed as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement.

Substiute Parts

DF11-14DP-2DSA(30)

Hirose Electric Co LtdIn Stock: 856DF11-14DP-2DSA(30) Datasheet

Current PartRFQ

DF11-14DP-2DSA(01)

Hirose Electric Co LtdIn Stock: 2247DF11-14DP-2DSA(01) Datasheet

DirectRFQ

1-1470109-4

TE Connectivity AMP ConnectorsIn Stock: 217661-1470109-4 Datasheet

MFR RecommendedRFQ

SWR204-NRTN-D07-ST-GA

Sullins Connector SolutionsIn Stock: 821SWR204-NRTN-D07-ST-GA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the DF11-14DP-2DSA(30) is determined by the following critical parameters: connector type (header), contact type (male pin), number of positions (14), number of rows (2), mating pitch (0.079"/2.00mm), row spacing (0.079"/2.00mm), mounting type (through hole), shrouding configuration (shrouded 4-wall), and termination method (solder). All identified substitute parts maintain these core electrical and mechanical specifications, ensuring functional compatibility in applications originally designed for the DF11-14DP-2DSA(30).

The substitute parts are grouped into two categories: direct Hirose equivalents and cross-manufacturer alternatives. Direct equivalents from Hirose maintain identical series specifications with variations in product status and packaging. Cross-manufacturer alternatives from TE Connectivity and Sullins Connector Solutions provide functionally equivalent solutions with comparable electrical ratings and mechanical form factors.

Parameter Comparison

Engineering Selection Recommendations

DF11-14DP-2DSA(01) is the primary direct equivalent, manufactured by Hirose Electric Co Ltd within the same DF11 series. This part maintains identical electrical and mechanical specifications to the obsolete DF11-14DP-2DSA(30), with the advantage of active product status and higher inventory availability (2195 pcs). The only notable difference is packaging format (bulk) and insulation color (black vs. white). This part is recommended for direct replacement in applications where Hirose series continuity is required.

1-1470109-4 (TE Connectivity AMPMODU series) provides a cross-manufacturer alternative with active product status and substantial inventory (21738 pcs). This part maintains all critical mechanical and electrical parameters. However, the voltage rating is reduced to 100VDC compared to the original 250V specification, and current rating is increased to 3A. This part is suitable for applications where the lower voltage rating is acceptable and where TE Connectivity supply chain integration is preferred.

SWR204-NRTN-D07-ST-GA (Sullins Connector Solutions SWR204 series) offers another cross-manufacturer option with active status. This part maintains mechanical compatibility but features a significantly reduced voltage rating of 50V and increased current rating of 3A per contact. The style designation indicates board-to-cable/wire configuration rather than board-to-board. This part is appropriate only for applications with voltage requirements not exceeding 50V.

All substitute parts maintain RoHS3 compliance and MSL 1 rating, ensuring compatibility with modern manufacturing and storage requirements.

Frequently Asked Questions (FAQ)

Q: Can DF11-14DP-2DSA(01) be used as a direct replacement for DF11-14DP-2DSA(30)?

A: Yes. Both parts are from the Hirose DF11 series and maintain identical electrical and mechanical specifications including pitch, row spacing, current rating, voltage rating, and operating temperature range. The primary differences are packaging format and insulation color, which do not affect functional compatibility.

Q: What are the voltage limitations when using cross-manufacturer substitutes?

A: The 1-1470109-4 (TE Connectivity) is rated for 100VDC maximum, and the SWR204-NRTN-D07-ST-GA (Sullins) is rated for 50V maximum. Both are lower than the original DF11-14DP-2DSA(30) specification of 250V. Applications requiring voltages above these limits must use the Hirose DF11-14DP-2DSA(01) equivalent.

Q: Are all substitute parts RoHS compliant?

A: Yes. All identified substitute parts carry ROHS3 compliance status, meeting current regulatory requirements for hazardous substance restrictions.

Q: What is the difference between board-to-board and board-to-cable/wire style designations?

A: Board-to-board connectors are designed for mating two printed circuit boards. Board-to-cable/wire connectors are designed for mating a printed circuit board with a cable or wire harness. The SWR204-NRTN-D07-ST-GA is designated for board-to-cable/wire applications, which may affect mechanical fit in applications originally designed for board-to-board mating.

Q: Which substitute part offers the best inventory availability?

A: The 1-1470109-4 (TE Connectivity AMPMODU series) has the highest inventory level at 21738 pcs, followed by DF11-14DP-2DSA(01) at 2195 pcs, and SWR204-NRTN-D07-ST-GA at 811 pcs.

Q: Are there any temperature range differences between the main part and substitutes?

A: The DF11-14DP-2DSA(30) and DF11-14DP-2DSA(01) both operate from -30°C to 85°C. The cross-manufacturer alternatives (1-1470109-4 and SWR204-NRTN-D07-ST-GA) have a minimum operating temperature of -25°C, which is 5°C higher. Applications requiring operation below -25°C must use the Hirose equivalents.