DF11-10DP-2DS(97) Equivalent & Substitute Parts

Part Overview

The DF11-10DP-2DS(97) is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for board-to-board or cable applications with 10 positions at 2.00mm pitch. This part is classified as obsolete and is no longer in active production. Due to its obsolete status, sourcing original units becomes increasingly difficult. Identifying active equivalent parts ensures design continuity and supply chain reliability for applications currently using this connector.

Substiute Parts

DF11-10DP-2DS(97)

Hirose Electric Co LtdIn Stock: 800DF11-10DP-2DS(97) Datasheet

Current PartRFQ

DF11-10DP-2DS(24)

Hirose Electric Co LtdIn Stock: 3619DF11-10DP-2DS(24) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The DF11-10DP-2DS(24) qualifies as a direct substitute based on the following critical parameters:

• Manufacturer: Both parts are manufactured by Hirose Electric Co Ltd, ensuring design and quality consistency
• Base Product Number: Both belong to the DF11 series, confirming mechanical and electrical compatibility
• Number of Positions: Both feature 10 positions
• Pitch - Mating: Both maintain 0.079" (2.00mm) pitch spacing
• Number of Rows: Both are configured with 2 rows
• Connector Type: Both are header connectors
• Contact Type: Both use male pin contacts
• Voltage Rating: Both are rated for 250V
• Current Rating: Both support 2A
• Operating Temperature Range: Both operate from -40°C to 85°C

The primary distinction is product status: DF11-10DP-2DS(97) is obsolete, while DF11-10DP-2DS(24) is active with current manufacturing and inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The DF11-10DP-2DS(24) is the designated substitute for the obsolete DF11-10DP-2DS(97). Selection is based on:

• Product Status Alignment: DF11-10DP-2DS(24) is active and maintains current manufacturing support, ensuring long-term availability
• Compliance Certifications: DF11-10DP-2DS(24) carries ROHS3 compliance and REACH unaffected status, meeting modern regulatory requirements
• Electrical and Mechanical Equivalence: All critical parameters—pitch, position count, voltage, current, and temperature range—are identical
• Inventory Availability: DF11-10DP-2DS(24) has 3568 units in stock, providing immediate procurement capability

For applications currently using DF11-10DP-2DS(97), direct substitution with DF11-10DP-2DS(24) is supported without design modification.

Frequently Asked Questions (FAQ)

Q: Can DF11-10DP-2DS(24) be used as a direct replacement for DF11-10DP-2DS(97)?

A: Yes. Both parts share identical electrical ratings (250V, 2A), mechanical configuration (10 positions, 2.00mm pitch, 2 rows), and contact specifications. The parts are mechanically and electrically interchangeable.

Q: What is the difference between the two part numbers?

A: The suffix designations (97) and (24) indicate different manufacturing batches or packaging variants. The functional specifications remain equivalent. DF11-10DP-2DS(97) is obsolete, while DF11-10DP-2DS(24) is in active production.

Q: Does DF11-10DP-2DS(24) meet current regulatory standards?

A: Yes. DF11-10DP-2DS(24) is ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Are there any packaging differences?

A: DF11-10DP-2DS(24) is supplied in tube packaging. Verify packaging requirements for your procurement and assembly processes.

Q: What is the moisture sensitivity level for the substitute part?

A: DF11-10DP-2DS(24) has MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.