DEPV09S564GTLF: Equivalent & Substitute Parts Reference

Part Overview

The DEPV09S564GTLF is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (FCI) in the DP series. This right-angle, through-hole solder connector features female sockets with mating-side female screwlock (4-40) and gold-plated contacts. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for new designs and production continuity.

Key Parameters

Parameter	DEPV09S564GTLF
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Shell Size / Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	7.5A
Voltage Rating	300V
Operating Temperature	-55°C ~ 125°C
Shell Material / Finish	Steel, Tin Plated
Contact Finish	Gold, GXT™
Flange Feature	Mating Side, Female Screwlock (4-40)
Backset Spacing	0.406" (10.30mm)
Material Flammability	UL94 V-0

Substitute Part Grouping Explanation

Substitution of the DEPV09S564GTLF is determined by strict alignment of the following critical parameters:

Mandatory Compatibility Parameters:

Connector type: Receptacle, Female Sockets
Number of positions: 9
Shell size / layout: 1 (DE, E)
Mounting type: Through Hole, Right Angle
Termination method: Solder
Current rating: 7.5A minimum
Voltage rating: 300V minimum
Operating temperature range: -55°C ~ 125°C minimum
Shell material: Steel, Tin Plated
Flange feature: Mating Side, Female Screwlock (4-40)

Acceptable Variations:

Contact finish composition (Gold vs. Gold plated) with equivalent thickness specifications
Backset spacing: 0.406" (10.30mm) or 0.319" (8.10mm) depending on mounting bracket requirements
Dielectric material: Thermoplastic or Thermoplastic, Glass Filled
Contact material: Copper Alloy or Brass
Product status: Active preferred over obsolete

The substitute parts are grouped into two categories based on backset spacing and flange configuration, with all alternatives maintaining the core electrical and mechanical interface requirements.

Parameter Comparison

Part Number	Manufacturer	Series	Status	Current Rating (A)	Voltage (V)	Backset (mm)	Flange Feature	Contact Material	Temp Range (°C)	RoHS
DEPV09S564GTLF	Amphenol ICC (FCI)	DP	Obsolete	7.5	300	10.30	Mating Side, Female Screwlock (4-40)	Copper Alloy	-55 ~ 125	N/A
3-106505-2	TE Connectivity AMP	AMPLIMITE HD-20	Active	6.0	125	10.30	Mating Side, Female Screwlock (4-40)	Phosphor Bronze	-55 ~ 105	ROHS3
L177DFE09S1AON	Amphenol ICC (Commercial)	DF	Active	7.5	300	10.30	Housing/Shell (Unthreaded)	Copper Alloy	-55 ~ 125	RoHS
L177DFE09SAM4	Amphenol ICC (Commercial)	DF	Active	7.5	300	8.10	Housing/Shell (Unthreaded)	Copper Alloy	-55 ~ 125	RoHS
L177DFEH09SAM4	Amphenol ICC (Commercial)	DF	Active	7.5	300	8.10	Board Side (4-40)	Copper Alloy	-55 ~ 125	RoHS
L177DFEH09SAM4RM6	Amphenol ICC (Commercial)	DF	Active	7.5	300	8.10	Board Side (4-40)	Copper Alloy	-55 ~ 125	RoHS
L177DFEH09SAZ4	Amphenol ICC (Commercial)	DF	Active	7.5	300	8.10	Board Side (4-40)	Copper Alloy	-55 ~ 125	RoHS
L77DE09S1AON	Amphenol ICC (Commercial)	D	Active	7.5	300	10.30	Housing/Shell (Unthreaded)	Brass	-55 ~ 125	RoHS
L77DE09SAZ4	Amphenol ICC (Commercial)	D	Active	7.5	300	8.10	Housing/Shell (Unthreaded)	Brass	-55 ~ 125	RoHS
L77DEH09S1AON	Amphenol ICC (Commercial)	D	Active	7.5	300	10.30	Board Side (4-40)	Brass	-55 ~ 125	RoHS
L77DEH09SAM4RM6	Amphenol ICC (Commercial)	D	Active	7.5	300	8.10	Board Side (4-40)	Brass	-55 ~ 125	RoHS

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

L177DFE09S1AON and L77DE09S1AON maintain full electrical and thermal specifications (7.5A, 300V, -55°C ~ 125°C) with identical backset spacing (10.30mm) to the DEPV09S564GTLF. Both are active products with RoHS compliance. The primary difference is flange configuration: L177DFE09S1AON features unthreaded housing, while L77DE09S1AON also uses unthreaded housing. Selection between these depends on PCB layout and mounting bracket compatibility.

Secondary Substitutes (Reduced Backset Spacing):

L177DFEH09SAM4RM6, L177DFEH09SAZ4, L77DE09SAZ4, and L77DEH09SAM4RM6 provide equivalent electrical performance but with reduced backset spacing (8.10mm). These are suitable for applications where mounting bracket integration is required. All maintain 7.5A current rating, 300V voltage rating, and -55°C ~ 125°C operating range. RoHS compliance is confirmed for all variants.

Limited Compatibility:

3-106505-2 (TE Connectivity) meets the basic connector interface but operates at reduced specifications: 6.0A current rating and 125V voltage rating. Operating temperature is limited to -55°C ~ 105°C. This part is suitable only for applications with lower electrical demands and narrower temperature requirements. ROHS3 compliance is confirmed.

Compliance Considerations:

All Amphenol ICC Commercial Products substitutes carry RoHS compliance certification. The original DEPV09S564GTLF (FCI variant) does not specify RoHS status. For new designs subject to RoHS requirements, Amphenol ICC Commercial Products variants are preferred. All parts maintain UL94 V-0 flammability rating and MSL 1 (Unlimited) moisture sensitivity.

Frequently Asked Questions (FAQ)

Q: Can L177DFE09S1AON directly replace DEPV09S564GTLF in existing designs?

A: L177DFE09S1AON is electrically and mechanically compatible with identical backset spacing (10.30mm), current rating (7.5A), voltage rating (300V), and operating temperature range (-55°C ~ 125°C). The primary difference is flange configuration: DEPV09S564GTLF uses mating-side female screwlock (4-40), while L177DFE09S1AON uses unthreaded housing. PCB mounting hole patterns must be verified for compatibility.

Q: What is the difference between backset spacing of 10.30mm and 8.10mm?

A: Backset spacing defines the distance from the connector mounting surface to the contact plane. 10.30mm spacing accommodates standard PCB layouts without mounting brackets. 8.10mm spacing is used with integrated mounting brackets for compact designs. Selection depends on available PCB real estate and mechanical mounting requirements.

Q: Why does 3-106505-2 have lower current and voltage ratings?

A: 3-106505-2 is from the TE Connectivity AMPLIMITE HD-20 series, designed for different application requirements. It operates at 6.0A and 125V compared to the DEPV09S564GTLF specifications of 7.5A and 300V. This part is suitable only for lower-power applications and should not be used as a direct replacement in designs requiring full 7.5A and 300V specifications.

Q: Are all substitute parts RoHS compliant?

A: All Amphenol ICC Commercial Products variants (L177 and L77 series) carry RoHS compliance certification. The original DEPV09S564GTLF does not specify RoHS status. For new designs subject to RoHS directives, Amphenol ICC Commercial Products are the appropriate choice.

Q: What is the difference between Copper Alloy and Brass contact materials?

A: Both materials provide equivalent electrical performance and are acceptable for this connector category. Copper Alloy is used in L177 series (DF) and original DEPV09S564GTLF. Brass is used in L77 series (D). Contact finish (gold plating) provides the primary corrosion resistance and electrical interface characteristics.

Q: Can parts with different flange features be interchanged?

A: Flange features determine mounting configuration. Mating-side female screwlock (4-40) differs from unthreaded housing and board-side (4-40) configurations. Interchange is possible only if PCB mounting hole patterns and mechanical clearances accommodate the different flange geometry. Physical verification is required before substitution.

Q: What packaging options are available?

A: Substitute parts are available in Tray packaging (L177 and L77 series variants with SAM4, SAZ4, or RM6 designations) or without specified packaging. Packaging selection depends on production volume and handling requirements. Tray packaging is standard for high-volume applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message