DEPV09P565TXLF D-Sub Connector Equivalent & Substitute Parts

Part Overview

The DEPV09P565TXLF is a 9-position D-Sub plug connector manufactured by Amphenol ICC (FCI) in the DP series. This right-angle, through-hole solder connector features male pins with mating-side female screwlock flanges and is designed for signal applications requiring robust mechanical and electrical performance. The part is active in production with 914 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity when the primary part becomes unavailable or when design requirements permit alternative configurations.

Substiute Parts

DEPV09P565TXLF

Amphenol ICC (FCI)In Stock: 1009DEPV09P565TXLF Datasheet

Current PartRFQ

L717DFE09P1BON

Amphenol ICC (Commercial Products)In Stock: 1044L717DFE09P1BON Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DEPV09P565TXLF is determined by the following critical parameters:

• Connector Style & Type: Must be D-Sub plug with male pins
• Position Count & Layout: Must be 9-position, 2-row configuration in shell size 1 (DE, E)
• Mounting Configuration: Must support through-hole, right-angle installation with solder termination
• Electrical Performance: Current rating of 7.5A and operating temperature range of -55°C to 125°C are baseline requirements
• Compliance: RoHS compliance and UL94 V-0 flammability rating required

The substitute part L717DFE09P1BON meets these core substitution criteria. Differences in flange design (housing/shell unthreaded versus mating-side female screwlock), contact finish thickness, voltage rating, and dielectric material composition do not preclude substitution when mechanical and electrical requirements align with the application.

Parameter Comparison

Engineering Selection Recommendations

Both the DEPV09P565TXLF and L717DFE09P1BON are active production parts manufactured by Amphenol ICC with RoHS compliance and UL94 V-0 flammability certification. Selection between these parts depends on application-specific voltage requirements and flange configuration needs.

The DEPV09P565TXLF is specified for applications requiring 1000V voltage rating with mating-side female screwlock flange design. The L717DFE09P1BON is suitable for applications with 300V maximum voltage requirements and offers panel mount capability with housing/shell unthreaded flange configuration. Both parts share identical position count, row configuration, shell size, current rating, temperature range, and solder termination method, ensuring mechanical and thermal compatibility in equivalent applications.

Frequently Asked Questions (FAQ)

Q: Can L717DFE09P1BON replace DEPV09P565TXLF in all applications?

A: Substitution is valid only when the application voltage requirement does not exceed 300V. The DEPV09P565TXLF is rated for 1000V, while L717DFE09P1BON is rated for 300V. If the circuit operates above 300V, the substitute part is not appropriate.

Q: What is the difference between the flange designs?

A: The DEPV09P565TXLF features a mating-side female screwlock flange (4-40), while the L717DFE09P1BON has a housing/shell unthreaded flange. Both are D-Sub standard configurations; flange selection depends on the mating connector and mechanical assembly requirements.

Q: Are the contact finishes equivalent?

A: Both parts use gold contact finish. The DEPV09P565TXLF specifies GXT™ gold at 30.0µin (0.76µm) thickness, while L717DFE09P1BON specifies standard gold at 20.0µin (0.51µm) thickness. Both finishes provide corrosion resistance and signal integrity for solder-terminated applications.

Q: Do both parts support the same mounting configuration?

A: Both parts support through-hole, right-angle solder mounting. The L717DFE09P1BON additionally supports panel mount configuration, providing greater installation flexibility.

Q: Are there inventory considerations for substitution?

A: The DEPV09P565TXLF has 914 units in stock, while L717DFE09P1BON has 944 units in stock. Both parts are in active production with equivalent availability.