DEP09S565TLF D-Sub 9 Position Receptacle Equivalent & Substitute Parts

Part Overview

The DEP09S565TLF is a 9 position D-Sub receptacle connector manufactured by Amphenol ICC (FCI) in the DP series. This right-angle, through-hole solder termination connector features female sockets with gold-plated contacts and is rated for 7.5A per contact at 1000V. The part is active in production with 1153 units in current inventory and carries RoHS compliance certification.

Equivalent and substitute parts are necessary when the original DEP09S565TLF becomes unavailable, when alternative packaging formats are required, or when design flexibility permits selection from qualified alternatives that meet the same electrical and mechanical specifications.

Substiute Parts

DEP09S565TLF

Amphenol ICC (FCI)In Stock: 1236DEP09S565TLF Datasheet

Current PartRFQ

09661126601

HARTINGIn Stock: 120609661126601 Datasheet

MFR RecommendedRFQ

09661127601

HARTINGIn Stock: 83909661127601 Datasheet

MFR RecommendedRFQ

09661127602

HARTINGIn Stock: 84409661127602 Datasheet

MFR RecommendedRFQ

09661526610

HARTINGIn Stock: 76809661526610 Datasheet

MFR RecommendedRFQ

09661526611

HARTINGIn Stock: 84009661526611 Datasheet

MFR RecommendedRFQ

09661526612

HARTINGIn Stock: 146309661526612 Datasheet

MFR RecommendedRFQ

09661526615

HARTINGIn Stock: 116309661526615 Datasheet

MFR RecommendedRFQ

09661526616

HARTINGIn Stock: 145209661526616 Datasheet

MFR RecommendedRFQ

09661527611

HARTINGIn Stock: 80109661527611 Datasheet

MFR RecommendedRFQ

09661527612

HARTINGIn Stock: 121309661527612 Datasheet

MFR RecommendedRFQ

09661527616

HARTINGIn Stock: 80609661527616 Datasheet

MFR RecommendedRFQ

09661566611

HARTINGIn Stock: 122909661566611 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DEP09S565TLF is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Connector type: D-Sub receptacle, female sockets
• Number of positions: 9
• Shell size and layout: 1 (DE, E)
• Mounting type: Through hole, right angle
• Termination method: Solder
• Operating temperature range: -55°C to 125°C
• Material flammability rating: UL94 V-0
• Contact material: Copper alloy

Allowable Variations:

• Current rating: DEP09S565TLF is rated 7.5A per contact; substitute parts rated 6.5A per contact are acceptable for applications not requiring the full 7.5A capacity
• Backset spacing: DEP09S565TLF specifies 0.406" (10.30mm); substitutes with 0.409" (10.40mm) are acceptable within standard tolerance
• Contact finish: DEP09S565TLF specifies gold plating; substitutes without specified contact finish are acceptable
• Flange feature: DEP09S565TLF uses unthreaded housing; substitutes with M3 or 4-40 threaded flanges are acceptable for different mounting requirements
• Packaging format: Bulk or tray packaging are interchangeable
• Dielectric material: DEP09S565TLF uses thermoplastic; substitutes using polybutylene terephthalate (PBT) with polyester and glass filler are acceptable
• RoHS compliance: DEP09S565TLF is RoHS compliant; ROHS3 compliant substitutes are acceptable

All substitute parts listed are manufactured by HARTING and maintain active product status.

Parameter Comparison

Engineering Selection Recommendations

All listed HARTING substitute parts maintain active product status and carry ROHS3 compliance certification. The DEP09S565TLF is RoHS compliant; ROHS3 compliant substitutes are acceptable for new designs and production environments requiring equivalent environmental compliance.

Selection between substitute parts depends on application-specific mounting requirements:

For unthreaded flange mounting: Use 09661526610 (bulk packaging, 751 units available).

For M3 threaded flange mounting: Use 09661126601, 09661127601, 09661526611, 09661526615, or 09661527611 depending on packaging preference (bulk or tray) and inventory availability.

For 4-40 threaded flange mounting: Use 09661127602, 09661526612, 09661526616, or 09661527612 depending on packaging preference and inventory availability.

All substitutes are rated for 6.5A per contact. Applications requiring the full 7.5A per contact rating of the DEP09S565TLF must use the original part or confirm that 6.5A capacity is sufficient for the circuit design.

Frequently Asked Questions (FAQ)

Q: Can HARTING parts rated 6.5A per contact replace the DEP09S565TLF rated 7.5A per contact?

A: Yes, provided the application circuit design does not require current exceeding 6.5A per contact. The 6.5A rating is the limiting factor for these substitutes. Circuit analysis must confirm that 6.5A capacity is adequate.

Q: What is the difference between unthreaded, M3, and 4-40 flange options?

A: The flange feature determines the mounting method on the PCB or chassis. Unthreaded flanges use friction fit or adhesive mounting. M3 flanges use metric M3 screws for mechanical retention. 4-40 flanges use imperial 4-40 screws. Select based on the mounting holes available in your assembly.

Q: Are bulk and tray packaging interchangeable?

A: Yes. Bulk and tray packaging are logistical variations only and do not affect electrical or mechanical performance. Select based on handling and storage requirements.

Q: What is the backset spacing difference between 0.406" and 0.409"?

A: The 0.003" (0.076mm) difference falls within standard connector tolerance and does not affect PCB layout compatibility for standard D-Sub applications.

Q: Do the HARTING substitutes have the same contact finish as the DEP09S565TLF?

A: The DEP09S565TLF specifies gold plating (GXT™, 30.0µin). HARTING substitute parts do not specify contact finish in the provided data. Contact finish specifications should be confirmed with the manufacturer if gold plating is a critical requirement for your application.

Q: Are all listed parts suitable for the full -55°C to 125°C operating range?

A: Yes. All parts, including the DEP09S565TLF and all HARTING substitutes, are rated for -55°C to 125°C continuous operation.

Q: What compliance certifications apply to these parts?

A: The DEP09S565TLF carries RoHS compliance. All HARTING substitutes carry ROHS3 compliance. Both certifications are acceptable for applications requiring environmental compliance. All parts meet UL94 V-0 flammability requirements.