DEP09S564CLORLF D-Sub 9 Position Receptacle Equivalent & Substitute Parts

Part Overview

The DEP09S564CLORLF is a 9 position D-Sub receptacle connector manufactured by Amphenol ICC (FCI) in the DP series. This through-hole, right-angle solder termination connector features female sockets with gold-plated copper alloy contacts and a tin-plated steel shell. The part is currently obsolete, making equivalent and substitute parts necessary for ongoing system maintenance, repairs, and new designs requiring compatible connectivity solutions.

Substiute Parts

DEP09S564CLORLF

Amphenol ICC (FCI)In Stock: 871DEP09S564CLORLF Datasheet

Current PartRFQ

DEP09S564TLF

Amphenol ICC (FCI)In Stock: 861DEP09S564TLF Datasheet

MFR RecommendedRFQ

6E17C009SBF120

Amphenol ICC (Commercial Products)In Stock: 8336E17C009SBF120 Datasheet

MFR RecommendedRFQ

6E17C009SBF220

Amphenol ICC (Commercial Products)In Stock: 10536E17C009SBF220 Datasheet

MFR RecommendedRFQ

6E17Y009SAJ220

Amphenol ICC (Commercial Products)In Stock: 8466E17Y009SAJ220 Datasheet

MFR RecommendedRFQ

788803-1

TE Connectivity AMP ConnectorsIn Stock: 1153788803-1 Datasheet

MFR RecommendedRFQ

M24308/23-25Z

ITT Cannon, LLCIn Stock: 1288M24308/23-25Z Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the DEP09S564CLORLF is determined by strict alignment of the following critical parameters:

• Connector type: Receptacle, Female Sockets
• Number of positions: 9
• Shell size and layout: 1 (DE, E)
• Mounting type: Through Hole, Right Angle
• Termination method: Solder
• Contact material and finish: Copper alloy with gold plating
• Dielectric material: Thermoplastic or polyamide
• Operating temperature range: Minimum -55°C to 125°C or higher
• RoHS compliance status

Substitute parts are grouped into two categories based on electrical performance and compliance:

Category 1: Direct Functional Equivalents (Active Status) Parts that maintain the same electrical specifications and RoHS compliance as the original design.

Category 2: Compatible Alternatives (Active Status) Parts that meet core mechanical and electrical requirements but may have variations in current rating, voltage rating, backset spacing, or compliance status. These require design verification for specific applications.

Parameter Comparison

Engineering Selection Recommendations

DEP09S564TLF (Amphenol ICC FCI, DP Series)

This is the manufacturer-recommended direct substitute. It maintains identical mechanical specifications, RoHS compliance, and operating temperature range as the original DEP09S564CLORLF. The DEP09S564TLF offers enhanced voltage rating (1000V versus 300V) and is in active production status. This part is the preferred choice for direct replacement in existing designs.

6E17C009SBF120 and 6E17C009SBF220 (Amphenol ICC Commercial Products, 6E17 Series)

These parts are mechanically and electrically compatible alternatives from Amphenol ICC. Both maintain RoHS compliance and UL94 V-0 flammability rating. Key differences include reduced current rating (5A versus 7.5A), lower operating temperature maximum (105°C versus 125°C), and different backset spacing (0.318" versus 0.406"). The 6E17C009SBF120 includes board lock and shielding features; the 6E17C009SBF220 includes board lock and female screwlock features. These parts are suitable for applications where the reduced current and temperature specifications are acceptable.

6E17Y009SAJ220 (Amphenol ICC Commercial Products, 6E17 Series)

This variant offers board lock and shielding with female screwlock features. It shares the same current rating (5A) and operating temperature maximum (105°C) as the 6E17C009 variants but features increased backset spacing (0.590" versus 0.318"). RoHS compliance and UL94 V-0 rating are maintained. Selection depends on mechanical fit requirements and shielding necessity.

788803-1 (TE Connectivity AMP Connectors, AMPLIMITE HD-20 Series)

This part is mechanically compatible but has RoHS non-compliance status. Current rating is 6A (between the 5A and 7.5A options), and voltage rating is limited to 125V. Operating temperature range is -55°C to 105°C. Contact material is phosphor bronze rather than copper alloy. This part is suitable only for applications where RoHS compliance is not required.

M24308/23-25Z (ITT Cannon, LLC, 24308-Style D*MM Series)

This part maintains 7.5A current rating and extends operating temperature to 150°C. It includes mounting brackets and supports panel mount in addition to through-hole mounting. However, it carries RoHS non-compliance status and uses yellow chromate plated zinc shell finish. Contact material specification is not provided. This part is suitable for high-temperature applications where RoHS compliance is not mandated.

Frequently Asked Questions (FAQ)

Q: Can DEP09S564TLF be used as a direct replacement for DEP09S564CLORLF?

A: Yes. DEP09S564TLF is the manufacturer-recommended substitute. It maintains identical mechanical dimensions, pin configuration, solder termination, and operating temperature range. Both parts are RoHS compliant and rated for 7.5A current. The primary difference is enhanced voltage rating (1000V versus 300V) and active production status versus obsolete status.

Q: What are the key differences between the Amphenol ICC DP series (DEP09S564TLF) and the 6E17 series alternatives?

A: The DP series maintains the original 0.406" backset spacing and 7.5A current rating. The 6E17 series uses 0.318" backset spacing and is rated for 5A current. Operating temperature maximum is 105°C for 6E17 parts versus 125°C for DP parts. The 6E17 series offers additional features such as board lock and shielding options. Backset spacing differences may affect PCB layout compatibility.

Q: Are the 6E17C009SBF120 and 6E17C009SBF220 interchangeable?

A: Both parts share identical electrical and mechanical specifications. The primary difference is flange feature: 6E17C009SBF120 has housing/shell with 4-40 board lock and shielding; 6E17C009SBF220 has mating side female screwlock with 4-40 and board lock. Selection depends on the specific mounting and locking requirements of the application.

Q: What is the impact of reduced current rating in 6E17 series parts?

A: The 6E17 series is rated for 5A per contact versus 7.5A for the original DEP09S564CLORLF and DEP09S564TLF. Applications requiring current levels between 5A and 7.5A must use DEP09S564TLF, 788803-1 (6A), or M24308/23-25Z (7.5A). Current rating determines maximum safe continuous current per contact without exceeding thermal limits.

Q: Why do some substitute parts have different backset spacing?

A: Backset spacing is the distance from the rear of the connector shell to the solder cup contact points. The original DEP09S564CLORLF uses 0.406" spacing. The 6E17 series uses 0.318" spacing, and 6E17Y009SAJ220 uses 0.590" spacing. Different spacing affects PCB hole pattern and component placement. Verify PCB design compatibility before substitution.

Q: Are RoHS non-compliant parts (788803-1 and M24308/23-25Z) suitable for new designs?

A: RoHS non-compliance restricts use in applications subject to RoHS regulations, including most consumer electronics and EU market products. These parts are suitable only for applications explicitly exempt from RoHS requirements or for legacy system maintenance where RoHS compliance was not originally mandated. Verify regulatory requirements before selection.

Q: What is the significance of contact finish thickness differences?

A: Contact finish thickness affects durability and mating cycle life. The original DEP09S564CLORLF uses flash gold plating. Substitute parts range from 3.00µin (6E17 series) to 50.0µin (M24308/23-25Z). Thicker plating generally provides longer service life and better corrosion resistance. Flash plating is suitable for standard applications; thicker plating is preferred for high-reliability or harsh environment applications.

Q: Can M24308/23-25Z be used in applications requiring 125°C operating temperature?

A: M24308/23-25Z supports operating temperature to 150°C, exceeding the 125°C requirement. However, it is RoHS non-compliant and uses different shell finish (yellow chromate plated zinc versus tin plated). Selection requires verification that RoHS non-compliance is acceptable and that the alternative shell finish is compatible with the application environment.