DEP09P565TXLF D-Sub 9-Position Right Angle Solder Plug Connector

Part Overview

The DEP09P565TXLF is a 9-position D-Sub plug connector manufactured by Amphenol ICC (FCI) in the DP series. This right-angle solder-mount connector is designed for through-hole PCB applications requiring signal transmission in compact form factors. The connector features male pins, tin-plated steel shell with gold-plated contacts, and operates across the industrial temperature range of -55°C to 125°C. With an active product status and RoHS compliance, this connector remains in production with 1060 units currently in stock.

Substitute parts are necessary when original manufacturer stock is unavailable, when alternative flange configurations are required for specific mechanical mounting scenarios, or when design flexibility demands connector variants with equivalent electrical performance but different mechanical features such as board lock mechanisms or alternative fastening options.

Key Parameters

Parameter	Value
Connector Type	D-Sub Plug, Male Pins
Number of Positions	9
Shell Size / Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination Method	Solder
Current Rating	7.5A per Contact
Voltage Rating	1000V
Operating Temperature	-55°C to 125°C
Shell Material / Finish	Steel, Tin Plated
Contact Finish	Gold (30.0µin / 0.76µm)
Flange Feature	Housing/Shell (Unthreaded)
RoHS Status	RoHS Compliant
Material Flammability	UL94 V-0

Substitute Part Grouping Explanation

Substitution of the DEP09P565TXLF is determined by strict adherence to the following electrical and mechanical parameters:

Core Substitution Criteria (Must Match):

Connector type: D-Sub Plug with Male Pins
Number of positions: 9
Shell size and layout: 1 (DE, E)
Mounting type: Through Hole, Right Angle
Termination: Solder
Operating temperature range: -55°C to 125°C
Material flammability rating: UL94 V-0
Contact material: Copper Alloy
Dielectric material: Thermoplastic or equivalent (PBT, Polyester, Glass Filled acceptable)
Moisture sensitivity level: 1 (Unlimited)

Acceptable Variations (Non-Critical for Substitution):

Flange feature configuration (Unthreaded, M3, 4-40, Mating Side Female Screwlock)
Current rating: 6.5A or higher per contact
Backset spacing: 0.406" to 0.409" (10.30mm to 10.40mm)
Contact finish specification (when not explicitly defined in substitute)
Additional features such as Board Lock or Grounding Indents

All HARTING substitute parts listed below meet these core criteria and are therefore electrically and mechanically compatible with the DEP09P565TXLF for standard D-Sub 9-position right-angle solder applications.

Parameter Comparison

Parameter	DEP09P565TXLF (Amphenol ICC)	09651226800 (HARTING)	09651226801 (HARTING)	09651226802 (HARTING)	09651227801 (HARTING)	09651227802 (HARTING)	09651236801 (HARTING)	09651626811 (HARTING)	09651626812 (HARTING)	09651626813 (HARTING)	09651626815 (HARTING)
Connector Type	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Shell Size / Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	7.5A per Contact	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A
Operating Temperature	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C
Shell Material / Finish	Steel, Tin Plated	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel
Contact Material	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy
Dielectric Material	Thermoplastic	PBT, Polyester, Glass Filled	PBT, Polyester, Glass Filled	PBT, Polyester, Glass Filled	PBT, Polyester, Glass Filled	PBT, Polyester, Glass Filled	PBT, Polyester, Glass Filled	PBT, Polyester, Glass Filled	PBT, Polyester, Glass Filled	PBT, Polyester, Glass Filled	PBT, Polyester, Glass Filled
Material Flammability	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Backset Spacing	0.406" (10.30mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)
Flange Feature	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (M3)	Housing/Shell (4-40)	Housing/Shell (M3)	Housing/Shell (4-40)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (4-40)	Mating Side, Female Screwlock (4-40)	Housing/Shell (M3)
Features	Grounding Indents	Grounding Indents	Grounding Indents	Grounding Indents	Grounding Indents	Grounding Indents	Grounding Indents	Board Lock, Grounding Indents	Board Lock, Grounding Indents	Board Lock, Grounding Indents	Board Lock, Grounding Indents
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed HARTING substitute parts maintain active product status and meet or exceed the electrical and mechanical requirements of the DEP09P565TXLF. Selection among the substitute options depends on specific mechanical mounting requirements:

For applications requiring unthreaded flange mounting: Part 09651226800 provides the closest mechanical match to the original DEP09P565TXLF configuration.

For applications requiring M3 threaded fastening: Parts 09651226801, 09651227801, 09651236801, 09651626811, and 09651626815 are suitable. Among these, 09651626811 and 09651626815 include board lock features for enhanced mechanical retention.

For applications requiring 4-40 UNC threaded fastening: Parts 09651226802, 09651227802, 09651626812, and 09651626813 are suitable. Parts 09651626812 and 09651626813 include board lock features. Part 09651626813 features mating-side female screwlock configuration for connector retention.

All substitute parts carry ROHS3 compliance and UL94 V-0 flammability certification, meeting contemporary regulatory requirements. The current rating reduction from 7.5A to 6.5A per contact in HARTING substitutes requires circuit-level verification if designs operate at maximum current density. All parts maintain the -55°C to 125°C operating temperature range and MSL 1 rating, ensuring compatibility with standard PCB assembly and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can HARTING parts with 6.5A current rating replace the DEP09P565TXLF rated at 7.5A per contact?

A: HARTING substitutes are electrically compatible for applications operating at or below 6.5A per contact. Applications requiring the full 7.5A per contact capability must retain the original DEP09P565TXLF or conduct circuit analysis to confirm operation within the reduced current specification.

Q: What is the difference between flange configurations (Unthreaded, M3, 4-40)?

A: Flange configuration determines the mechanical fastening method for connector retention on the mating surface. Unthreaded flanges rely on friction or adhesive retention. M3 flanges accept M3 metric screws. 4-40 flanges accept 4-40 UNC imperial screws. Selection depends on the mating connector or panel design.

Q: Do board lock features affect electrical performance?

A: Board lock features (present in parts 09651626811, 09651626812, 09651626813, and 09651626815) provide mechanical retention enhancement and do not alter electrical performance. These features are compatible with standard D-Sub 9-position receptacles.

Q: Are all substitute parts suitable for high-temperature applications?

A: All listed substitutes maintain the -55°C to 125°C operating temperature range. The dielectric material change from unspecified thermoplastic to PBT polyester glass-filled composition in HARTING parts does not degrade thermal performance within this range.

Q: What is the significance of ROHS3 compliance versus RoHS compliance?

A: Both designations indicate compliance with Restriction of Hazardous Substances regulations. ROHS3 represents the current regulatory iteration. All parts meet hazardous substance restrictions and are suitable for applications requiring RoHS compliance.

Q: Can substitute parts be intermixed in the same assembly?

A: Yes. All substitute parts are mechanically and electrically interchangeable within the same assembly, provided the selected flange configuration matches the mating connector or panel design requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message