DDZ9700-7 Equivalent & Substitute Parts

Part Overview

The DDZ9700-7 is a Zener diode manufactured by Diodes Incorporated, rated at 13 V nominal with 500 mW power dissipation in a surface mount SOD-123 package. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to component availability, supply chain considerations, or design flexibility within specified parameter tolerances.

Key Parameters

Parameter	Value	Unit
Voltage - Zener (Nom)	13	V
Tolerance	±5%	-
Power - Max	500	mW
Current - Reverse Leakage @ Vr	50 nA @ 9.8 V	-
Voltage - Forward (Vf) (Max) @ If	900 mV @ 10 mA	-
Operating Temperature	-65°C ~ 150°C	-
Mounting Type	Surface Mount	-
Package / Case	SOD-123	-
RoHS Status	ROHS3 Compliant	-
Moisture Sensitivity Level	1 (Unlimited)	-

Substitute Part Grouping Explanation

Substitution of the DDZ9700-7 is determined by the following critical parameters:

Primary Substitution Criteria:

Voltage - Zener (Nom): 13 V (exact match required)
Power - Max: 500 mW (equal or greater acceptable)
Package / Case: SOD-123 or SOD-123F (mechanically compatible)
Mounting Type: Surface Mount
Operating Temperature Range: Must encompass or match -65°C ~ 150°C or -55°C ~ 150°C
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Secondary Compatibility Parameters:

Tolerance: ±5% or tighter (±2%, ±3%, ±6% acceptable within design margin)
Voltage - Forward (Vf) (Max) @ If: 900 mV @ 10 mA (standard across all substitutes)
Current - Reverse Leakage @ Vr: Variation acceptable within application requirements

Substitute parts meeting these criteria are functionally equivalent for circuit applications requiring a 13 V Zener diode with 500 mW power rating in SOD-123 surface mount packaging.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Voltage - Zener (Nom) (V)	Tolerance	Power - Max (mW)	Package / Case	Operating Temperature (°C)	Compliance
DDZ9700-7	Diodes Incorporated	13	±5%	500	SOD-123	-65 ~ 150	ROHS3
MMSZ5243B-7-F	Diodes Incorporated	13	±5%	500	SOD-123	-65 ~ 150	ROHS3
BZT52B13-E3-08	Vishay General Semiconductor - Diodes Division	13	±2%	410	SOD-123	-65 ~ 150	ROHS3
BZT52C13-TP	Micro Commercial Co	13	±6%	200	SOD-123	-65 ~ 150	ROHS3
MMSZ13T1G	onsemi	13	±5%	500	SOD-123	-55 ~ 150	ROHS3
MMSZ4700-E3-08	Vishay General Semiconductor - Diodes Division	13	±5%	500	SOD-123	-55 ~ 150	ROHS3
MMSZ4700-E3-18	Vishay General Semiconductor - Diodes Division	13	±5%	500	SOD-123	-55 ~ 150	ROHS3
MMSZ4700T1G	onsemi	13	±5%	500	SOD-123	-55 ~ 150	ROHS3
MMSZ5243B-TP	Micro Commercial Co	13	±5%	500	SOD-123	-55 ~ 150	ROHS3
NZH13B,115	Nexperia USA Inc.	13	±3%	500	SOD-123F	-55 ~ 150	ROHS3
SZMMSZ13ET1G	onsemi	13	±5%	500	SOD-123	-55 ~ 150	ROHS3

Engineering Selection Recommendations

Full Electrical and Thermal Equivalents (Recommended Primary Substitutes):

The following parts provide complete parameter equivalence to the DDZ9700-7 with matching 500 mW power rating, ±5% tolerance, and -65°C to 150°C operating range:

MMSZ5243B-7-F (Diodes Incorporated): Identical specifications with same manufacturer, ensuring design continuity and supply chain consistency.

High-Compatibility Substitutes (500 mW, ±5% Tolerance):

Parts with 500 mW power rating and ±5% tolerance but reduced lower operating temperature limit (-55°C minimum instead of -65°C):

MMSZ13T1G (onsemi)
MMSZ4700-E3-08 (Vishay General Semiconductor - Diodes Division)
MMSZ4700-E3-18 (Vishay General Semiconductor - Diodes Division)
MMSZ4700T1G (onsemi)
MMSZ5243B-TP (Micro Commercial Co)
SZMMSZ13ET1G (onsemi) - Automotive grade with AEC-Q101 qualification

Specialized Substitutes:

NZH13B,115 (Nexperia USA Inc.): SOD-123F package variant with ±3% tolerance and automotive AEC-Q100 qualification. Package footprint differs from standard SOD-123; PCB layout modification required.

Limited Power Substitutes (Not Recommended for Full Power Applications):

BZT52B13-E3-08 (Vishay): 410 mW power rating (82% of original). Suitable only for reduced power dissipation applications.
BZT52C13-TP (Micro Commercial Co): 200 mW power rating (40% of original). Suitable only for low-power applications.

All substitute parts maintain RoHS3 compliance, MSL 1 (Unlimited) moisture sensitivity, and surface mount compatibility.

Frequently Asked Questions (FAQ)

Q: Can I substitute the DDZ9700-7 with any 13 V Zener diode?

A: No. Substitution requires matching the 13 V nominal voltage, 500 mW power rating, SOD-123 package, and operating temperature range. Additional parameters including tolerance, reverse leakage current, and forward voltage must remain within acceptable design margins.

Q: What is the difference between SOD-123 and SOD-123F packages?

A: SOD-123F is a variant of the SOD-123 package with different mechanical dimensions. While both are surface mount packages for similar applications, PCB footprints differ. The NZH13B,115 uses SOD-123F and requires layout modification if substituting for standard SOD-123 parts.

Q: Why do some substitutes have a -55°C minimum operating temperature instead of -65°C?

A: The DDZ9700-7 specifies -65°C to 150°C operating range. Substitutes with -55°C to 150°C range have a narrower lower temperature specification. Selection depends on application requirements; if operation below -55°C is required, only MMSZ5243B-7-F or BZT52B13-E3-08 are suitable.

Q: Can I use BZT52C13-TP (200 mW) in place of DDZ9700-7 (500 mW)?

A: BZT52C13-TP is electrically equivalent at 13 V nominal voltage but has 60% lower power dissipation capacity. Use only in applications where power dissipation does not exceed 200 mW. Exceeding this limit causes component failure.

Q: What does ±5% tolerance mean for a 13 V Zener diode?

A: ±5% tolerance indicates the Zener voltage can vary between 12.35 V and 13.65 V at specified test conditions. Tighter tolerances (±2%, ±3%) provide narrower voltage ranges; looser tolerances (±6%) provide wider ranges. Design circuits to accommodate the specified tolerance range.

Q: Are automotive-qualified parts (SZMMSZ13ET1G, NZH13B,115) interchangeable with standard industrial parts?

A: Automotive-qualified parts meet additional reliability and qualification standards (AEC-Q100, AEC-Q101). They are functionally interchangeable with standard parts but may have different pricing and lead times. Use automotive-qualified parts when application requirements or customer specifications mandate automotive-grade components.

Q: What is the significance of packaging format (Tape & Reel vs. Cut Tape)?

A: Tape & Reel (TR) and Cut Tape (CT) refer to supply format, not component specifications. Tape & Reel provides components on continuous tape for automated assembly. Cut Tape provides smaller quantities on cut tape segments. Electrical and mechanical specifications remain identical; selection depends on production volume and assembly equipment compatibility.

Q: Can I substitute MMSZ4700-E3-18 (Cut Tape) for DDZ9700-7 (Tape & Reel)?

A: Yes, electrically and mechanically. Both are 13 V, 500 mW, SOD-123 Zener diodes with ±5% tolerance. The difference is packaging format only. Verify your assembly equipment accepts Cut Tape format before substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message