DDTC124TKA-7-F Equivalent & Substitute Parts

Part Overview

The DDTC124TKA-7-F is a pre-biased NPN bipolar junction transistor (BJT) manufactured by Diodes Incorporated in the SC-59-3 surface mount package. This component is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement continuity. The part operates at 50 V collector-emitter breakdown voltage with a maximum collector current of 100 mA and 250 MHz transition frequency, suitable for general-purpose switching and amplification applications in surface mount designs.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN - Pre-Biased	—
Collector Current (Max)	100	mA
Collector-Emitter Breakdown Voltage (Max)	50	V
Base Resistor (R1)	22	kOhms
DC Current Gain (hFE) Min @ Ic, Vce	100 @ 1mA, 5V	—
Vce Saturation (Max) @ Ib, Ic	300mV @ 500µA, 5mA	—
Collector Cutoff Current (Max)	500	nA
Transition Frequency	250	MHz
Power Dissipation (Max)	200	mW
Mounting Type	Surface Mount	—
Package / Case	TO-236-3, SC-59, SOT-23-3	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the DDTC124TKA-7-F is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

Transistor type: NPN pre-biased configuration
Collector current rating: 100 mA maximum
Collector-emitter breakdown voltage: 50 V minimum
Base resistor value: 22 kOhms (for direct functional equivalence)
DC current gain: 100 minimum at specified test conditions
Vce saturation: 300 mV maximum at specified bias conditions
Transition frequency: 250 MHz minimum
Power dissipation: 200 mW minimum
Surface mount package compatibility: TO-236-3, SC-59, or SOT-23-3

Substitution Categories:

Direct Equivalents maintain identical electrical specifications and base resistor values, differing only in packaging format (tape & reel versus cut tape) or supplier device package designation (SC-59-3 versus SOT-23-3).

Compatible Substitutes meet all critical electrical parameters but may feature different base resistor values (10 kOhms, 4.7 kOhms, or 47 kOhms) or enhanced specifications (higher power dissipation, improved saturation characteristics). These parts function in the same circuit topology with potential circuit behavior modifications due to altered base bias networks.

Upgraded Alternatives exceed the original specifications in power dissipation (250 mW), saturation voltage (150 mV), or include automotive qualification (AEC-Q100), providing enhanced performance margins while maintaining backward compatibility.

Parameter Comparison

Part Number	Manufacturer	Product Status	Ic (Max) mA	Vce(br) V	R1 kOhms	hFE Min @ Ic, Vce	Vce Sat (Max) mV	Icbo (Max) nA	Freq MHz	Power mW	Package
DDTC124TKA-7-F	Diodes Inc.	Obsolete	100	50	22	100 @ 1mA, 5V	300 @ 500µA, 5mA	500	250	200	SC-59-3
DDTC124TCA-7-F	Diodes Inc.	Active	100	50	22	100 @ 1mA, 5V	300 @ 500µA, 5mA	500	250	200	SOT-23-3
DTC124TKAT146	Rohm Semi.	Not For New Designs	100	50	22	100 @ 1mA, 5V	300 @ 500µA, 5mA	500	250	200	SMT3
PDTC124ET,215	Nexperia USA	Active	100	50	22	60 @ 5mA, 5V	150 @ 500µA, 10mA	1000	—	250	TO-236AB
PDTC124ET,235	NXP USA	Active	100	50	22	60 @ 5mA, 5V	150 @ 500µA, 10mA	—	—	250	SOT-23
PDTC124TT,215	Nexperia USA	Active	100	50	22	100 @ 1mA, 5V	150 @ 500µA, 10mA	1000	—	250	TO-236AB
PDTC124XT,215	Nexperia USA	Active	100	50	22	80 @ 5mA, 5V	150 @ 500µA, 10mA	1000	—	250	TO-236AB
DTC114TCA-TP	Micro Commercial	Active	100	50	10	100 @ 1mA, 5V	300 @ 1mA, 10mA	500	250	200	SOT-23
DTC114TKAT146	Rohm Semi.	Active	100	50	10	100 @ 1mA, 5V	300 @ 1mA, 10mA	500	250	200	SMT3
DTC143TKAT146	Rohm Semi.	Active	100	50	4.7	100 @ 1mA, 5V	150 @ 250µA, 5mA	500	250	200	SMT3
DTC144TCA-TP	Micro Commercial	Active	100	50	47	100 @ 1mA, 5V	300 @ 1mA, 10mA	500	250	200	SOT-23

Engineering Selection Recommendations

Direct Replacement (Identical Electrical Performance):

DDTC124TCA-7-F is the primary direct replacement for DDTC124TKA-7-F. Both parts are manufactured by Diodes Incorporated with identical electrical specifications, base resistor value (22 kOhms), and performance characteristics. The only difference is the supplier device package designation (SOT-23-3 versus SC-59-3) and product status (Active versus Obsolete). This part is recommended for immediate substitution where package compatibility permits.

Active Alternatives with Identical Base Resistor:

PDTC124TT,215 (Nexperia USA) maintains the 22 kOhms base resistor and 100 mA collector current rating. This part features improved saturation characteristics (150 mV versus 300 mV) and higher power dissipation (250 mW versus 200 mW), providing enhanced performance margins. The part carries automotive qualification (AEC-Q100) and active product status.

PDTC124XT,215 (Nexperia USA) also maintains the 22 kOhms base resistor with similar performance enhancements and automotive qualification. This variant includes a 47 kOhms emitter-base resistor, which may alter circuit behavior in specific bias configurations.

Compatible Alternatives with Modified Base Resistor:

DTC114TKAT146 (Rohm Semiconductor) features a 10 kOhms base resistor instead of 22 kOhms. This lower base resistance increases base current drive capability and reduces turn-on time. The part maintains 100 mA collector current, 50 V breakdown voltage, and 250 MHz transition frequency. Active product status and high inventory availability support procurement continuity.

DTC143TKAT146 (Rohm Semiconductor) features a 4.7 kOhms base resistor with improved saturation characteristics (150 mV at 250 µA, 5 mA). This configuration provides the strongest base drive and fastest switching response. Active product status and highest inventory availability (365,200 units) ensure supply security.

DTC144TCA-TP (Micro Commercial Co) features a 47 kOhms base resistor, reducing base current drive and increasing turn-on time. This configuration is suitable for applications requiring reduced base current consumption. Active product status supports long-term availability.

Upgraded Performance Alternatives:

PDTC124ET,215 and PDTC124ET,235 (Nexperia/NXP) offer 250 mW power dissipation and 150 mV saturation voltage, exceeding the original 200 mW and 300 mV specifications. These parts provide enhanced thermal performance and improved switching characteristics while maintaining the 22 kOhms base resistor and 100 mA collector current rating. Active product status and high inventory levels support production requirements.

All recommended substitutes maintain RoHS3 compliance, MSL Level 1 (unlimited moisture sensitivity), and surface mount compatibility with the original design.

Frequently Asked Questions (FAQ)

Q: Can DDTC124TCA-7-F be used as a direct replacement for DDTC124TKA-7-F?

A: Yes. DDTC124TCA-7-F is electrically identical to DDTC124TKA-7-F with matching specifications across all critical parameters: 100 mA collector current, 50 V breakdown voltage, 22 kOhms base resistor, 100 mA hFE minimum, and 250 MHz transition frequency. The only difference is the supplier device package designation (SOT-23-3 versus SC-59-3). Both packages are physically compatible with TO-236-3 footprints. DDTC124TCA-7-F carries active product status, making it the recommended primary substitute.

Q: What is the difference between parts with 22 kOhms, 10 kOhms, 4.7 kOhms, and 47 kOhms base resistors?

A: The base resistor value determines the base current drive capability and switching speed. Lower base resistor values (4.7 kOhms, 10 kOhms) increase base current drive, reducing turn-on time and improving switching speed. Higher base resistor values (47 kOhms) reduce base current consumption but increase turn-on time. The 22 kOhms value in the original part represents a balanced design. Selection of alternative base resistor values requires circuit analysis to ensure proper bias conditions and switching performance in the target application.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed carry RoHS3 compliance certification, meeting environmental and material restriction requirements for electronic components.

Q: What is the significance of product status (Active, Obsolete, Not For New Designs)?

A: Product status indicates manufacturer support and availability. Active status guarantees ongoing production and long-term availability. Obsolete status indicates discontinued production with limited remaining inventory. Not For New Designs indicates the manufacturer no longer recommends the part for new circuit designs but may continue limited production for existing customers. For new designs, selection from Active status parts ensures supply continuity and manufacturer support.

Q: Can PDTC124ET,215 or PDTC124ET,235 be used in place of DDTC124TKA-7-F?

A: Yes, with performance enhancements. These parts maintain the 22 kOhms base resistor and 100 mA collector current rating but feature improved saturation voltage (150 mV versus 300 mV) and higher power dissipation (250 mW versus 200 mW). The DC current gain specification differs (60 @ 5mA, 5V versus 100 @ 1mA, 5V), reflecting different test conditions. These parts are suitable for applications requiring enhanced thermal performance and faster switching response. Both carry active product status.

Q: What package compatibility considerations apply to substitution?

A: The original DDTC124TKA-7-F uses SC-59-3 package designation. Substitute parts use equivalent package designations: SOT-23-3, SOT-23, TO-236AB, and SMT3. All these packages are physically compatible with TO-236-3 footprints and surface mount assembly processes. Verify PCB footprint compatibility with the selected substitute part's supplier device package specification before design implementation.

Q: Which substitute part offers the best availability?

A: DTC143TKAT146 (Rohm Semiconductor) offers the highest inventory availability at 365,200 units in stock. This part features a 4.7 kOhms base resistor, providing the strongest base drive and fastest switching response. Active product status ensures ongoing production support.

Q: Are automotive-qualified alternatives available?

A: Yes. PDTC124TT,215 and PDTC124XT,215 (Nexperia USA) carry AEC-Q100 automotive qualification. These parts maintain the 22 kOhms base resistor with improved saturation characteristics (150 mV) and higher power dissipation (250 mW). Automotive qualification ensures compliance with automotive industry reliability and quality standards.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message