DCX69-16-13 Equivalent & Substitute Parts

Part Overview

The DCX69-16-13 is a Surface Mount PNP Bipolar Junction Transistor manufactured by Diodes Incorporated, rated for 20V collector-emitter breakdown voltage and 1A maximum collector current in a SOT-89-3 package. This device is classified as Obsolete, indicating discontinuation from the manufacturer. Equivalent and substitute parts are necessary to maintain design continuity and ensure component availability for production and repair applications.

Key Parameters

Parameter	Value
Transistor Type	PNP
Voltage - Collector Emitter Breakdown (Max)	20 V
Current - Collector (Ic) (Max)	1 A
Power - Max	1 W
Frequency - Transition	200 MHz
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 1A
DC Current Gain (hFE) (Min) @ Ic, Vce	100 @ 500mA, 1V
Operating Temperature	-55°C ~ 150°C (TJ)
Package / Case	TO-243AA
Supplier Device Package	SOT-89-3
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the DCX69-16-13 is determined by the following critical parameters:

Primary Substitution Criteria:

Transistor Type: PNP (polarity must match)
Voltage - Collector Emitter Breakdown: 20V minimum
Current - Collector (Ic): 1A minimum
Package / Case: TO-243AA (SOT-89 family)
Mounting Type: Surface Mount
Vce Saturation: 500mV maximum @ specified conditions
Operating Temperature Range: Must encompass application requirements

Substitution Categories:

Direct Equivalents (PNP, 20V, 1A, SOT-89): Parts that maintain identical transistor polarity, voltage rating, current rating, and package form factor. These provide pin-compatible replacement with equivalent or superior electrical performance.

Functional Alternatives (Different Polarity or Package): Parts that differ in transistor type (NPN instead of PNP) or package configuration (SOT-223 instead of SOT-89). These require circuit redesign and are suitable only when application topology permits.

Higher Current Capability (PNP, 20V, >1A, SOT-89): Parts rated for collector currents exceeding 1A in the same package. These provide enhanced current handling while maintaining backward compatibility in applications with lower current demands.

Parameter Comparison

Part Number	Manufacturer	Transistor Type	Ic (Max)	Vce Breakdown (Max)	Power (Max)	Frequency (Transition)	Package	Product Status	Operating Temp (TJ)
DCX69-16-13	Diodes Incorporated	PNP	1 A	20 V	1 W	200 MHz	SOT-89-3	Obsolete	-55°C ~ 150°C
BCX6925TA	Diodes Incorporated	PNP	1 A	20 V	1 W	100 MHz	SOT-89-3	Active	-65°C ~ 150°C
BC869-16,115	Nexperia USA Inc.	PNP	1 A	20 V	1.2 W	140 MHz	SOT-89	Active	-55°C ~ 150°C
BCP69T1G	onsemi	PNP	1 A	20 V	1.5 W	60 MHz	SOT-223	Active	-65°C ~ 150°C
2PD2150,115	NXP Semiconductors	NPN	3 A	20 V	2 W	220 MHz	SOT-89	Active	-55°C ~ 150°C
BC868,115	Nexperia USA Inc.	NPN	1 A	20 V	1.2 W	170 MHz	SOT-89	Active	-55°C ~ 150°C
BC868-25,115	Nexperia USA Inc.	NPN	2 A	20 V	500 mW	170 MHz	SOT-89	Active	-55°C ~ 150°C
BCX6810H6327XTSA1	Infineon Technologies	NPN	1 A	20 V	3 W	100 MHz	SOT-89	Last Time Buy	-55°C ~ 150°C
BCX6816H6327XTSA1	Infineon Technologies	NPN	1 A	20 V	3 W	100 MHz	SOT-89	Obsolete	-55°C ~ 150°C
PBSS4320X,135	Nexperia USA Inc.	NPN	3 A	20 V	1.6 W	100 MHz	SOT-89	Active	-55°C ~ 150°C
PBSS4520X,135	Nexperia USA Inc.	NPN	5 A	20 V	550 mW	125 MHz	SOT-89	Active	-55°C ~ 150°C

Engineering Selection Recommendations

Direct Replacement (Pin-Compatible, No Circuit Modification Required):

BCX6925TA is the primary direct substitute for DCX69-16-13. Both devices are PNP transistors with identical 20V breakdown voltage, 1A collector current rating, and SOT-89-3 package configuration. BCX6925TA is manufactured by Diodes Incorporated (same manufacturer as the original part) and carries Active product status with extended lower operating temperature limit (-65°C versus -55°C). Transition frequency is reduced from 200MHz to 100MHz; this reduction is acceptable in applications where switching speed does not exceed 100MHz. RoHS3 compliance and MSL-1 rating are maintained.

BC869-16,115 provides an alternative direct replacement manufactured by Nexperia USA Inc. This part maintains PNP polarity, 20V/1A ratings, and SOT-89 package compatibility. Enhanced power rating (1.2W versus 1W) and automotive qualification (AEC-Q100) provide additional design margin. Transition frequency of 140MHz falls between the original 200MHz and BCX6925TA's 100MHz. Operating temperature range matches the original specification (-55°C to 150°C).

Package Alternative (Requires PCB Layout Modification):

BCP69T1G is a PNP transistor manufactured by onsemi with identical electrical ratings (20V, 1A) but in SOT-223 package instead of SOT-89. This substitution requires PCB redesign due to different pin configuration and footprint. Enhanced power dissipation capability (1.5W) and extended lower temperature rating (-65°C) are provided. Transition frequency is reduced to 60MHz, limiting application to lower-speed circuits.

Polarity Inversion Substitutes (Requires Circuit Redesign):

NPN transistors (BC868,115; BC868-25,115; 2PD2150,115; BCX6810H6327XTSA1; PBSS4320X,135; PBSS4520X,135) are listed as functional alternatives only when circuit topology permits complementary pair substitution or when application design accommodates polarity reversal. These parts maintain 20V breakdown voltage and SOT-89 package form factor but require signal path and biasing network modifications. Selection among NPN options depends on specific current and power requirements of the application.

Compliance and Availability:

All recommended substitutes maintain RoHS3 compliance and MSL-1 moisture sensitivity rating. BCX6925TA and BC869-16,115 are preferred for new designs due to Active product status. BCX6810H6327XTSA1 carries Last Time Buy status and should be avoided for long-term production commitments. BCX6816H6327XTSA1 is Obsolete and unsuitable for new applications.

Frequently Asked Questions (FAQ)

Q: Can BCX6925TA directly replace DCX69-16-13 without circuit modification?

A: Yes. BCX6925TA is a direct pin-compatible substitute. Both devices are PNP transistors in SOT-89-3 package with identical 20V breakdown voltage and 1A collector current rating. No PCB layout or circuit redesign is required. The reduced transition frequency (100MHz versus 200MHz) is acceptable for applications operating below 100MHz.

Q: What is the difference between SOT-89-3 and SOT-89 package designations?

A: SOT-89-3 and SOT-89 refer to the same physical package form factor (TO-243AA) with three leads. The "-3" designation in SOT-89-3 explicitly indicates three terminals. Both are compatible in applications designed for SOT-89 three-lead surface mount packages.

Q: Why are NPN transistors listed as substitutes for a PNP device?

A: NPN transistors are listed as functional alternatives for applications where circuit topology permits complementary pair operation or where the design can accommodate polarity reversal. Direct substitution of NPN for PNP requires modification of bias networks and signal paths. NPN options are provided for design flexibility in new circuit implementations.

Q: Is BC869-16,115 suitable for automotive applications?

A: Yes. BC869-16,115 carries AEC-Q100 automotive qualification and is rated for automotive-grade operation. This qualification is not present on the original DCX69-16-13 or on BCX6925TA. Selection of BC869-16,115 is appropriate when automotive-grade components are required by specification.

Q: What is the impact of reduced transition frequency in BCX6925TA compared to DCX69-16-13?

A: Transition frequency reduction from 200MHz to 100MHz limits switching speed capability. BCX6925TA is suitable for applications with switching frequencies below 100MHz. Applications requiring switching speeds above 100MHz must use alternative parts such as BC869-16,115 (140MHz) or the original DCX69-16-13 if available from inventory.

Q: Can BCP69T1G be used as a direct replacement?

A: BCP69T1G is functionally equivalent but requires PCB redesign. The SOT-223 package has a different footprint and pin configuration than the SOT-89-3 package of DCX69-16-13. Electrical parameters are compatible (PNP, 20V, 1A), but physical layout modification is mandatory.

Q: What does "Last Time Buy" product status mean for BCX6810H6327XTSA1?

A: Last Time Buy status indicates the manufacturer has announced discontinuation with a final purchase deadline. This part should not be selected for new production designs requiring long-term component availability. Use Active-status alternatives such as BCX6925TA or BC869-16,115 for sustained production.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed carry RoHS3 compliance certification. Moisture sensitivity level (MSL-1) is maintained across all alternatives, indicating unlimited shelf life under controlled storage conditions.

Q: What is the significance of the extended temperature range in BCX6925TA (-65°C to 150°C versus -55°C to 150°C)?

A: The extended lower temperature limit of -65°C provides additional design margin for applications operating in cold environments. This extended range does not affect applications within the original -55°C to 150°C specification. Selection of BCX6925TA is beneficial for designs requiring enhanced low-temperature performance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message