DCX53-16-13 Equivalent & Substitute Parts

Part Overview

The DCX53-16-13 is a PNP bipolar junction transistor manufactured by Diodes Incorporated, rated for 80 V collector-emitter breakdown voltage and 1 A maximum collector current in a surface mount SOT-89-3 package. This device is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The part operates across a temperature range of -55°C to 150°C and delivers 1 W maximum power dissipation with a transition frequency of 200 MHz.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) Max	1	A
Voltage - Collector Emitter Breakdown (Max)	80	V
Vce Saturation (Max) @ Ib, Ic	500 mV @ 50 mA, 500 mA	—
Current - Collector Cutoff (Max)	100	nA
DC Current Gain (hFE) Min @ Ic, Vce	100 @ 150 mA, 2 V	—
Power - Max	1	W
Frequency - Transition	200	MHz
Operating Temperature	-55 to 150	°C
Mounting Type	Surface Mount	—
Package / Case	TO-243AA	—
Supplier Device Package	SOT-89-3	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the DCX53-16-13 is determined by the following critical parameters:

Primary Substitution Criteria:

Transistor Type: PNP
Collector-Emitter Breakdown Voltage: 80 V minimum
Maximum Collector Current: 1 A or greater
Vce Saturation: 500 mV @ 50 mA, 500 mA
Collector Cutoff Current: 100 nA maximum
DC Current Gain (hFE): 100 minimum @ 150 mA, 2 V
Package: TO-243AA (SOT-89 or SOT-89-3)
Mounting: Surface Mount
RoHS Compliance: ROHS3 Compliant

Secondary Considerations:

Power dissipation capability (1 W or greater)
Transition frequency (200 MHz or greater preferred for performance equivalence)
Operating temperature range (minimum -55°C to 150°C)
Product status (active parts preferred over obsolete or last-time-buy)

Substitutes are grouped into two categories: direct electrical equivalents with identical or superior electrical specifications, and functional equivalents that meet the core electrical requirements while differing in secondary parameters such as transition frequency or power rating.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) A	Vce(br) V	hFE Min @ 150mA, 2V	Power W	Freq MHz	Temp °C	Package	Status
DCX53-16-13	Diodes Inc.	1	80	100	1	200	-55 to 150	SOT-89-3	Obsolete
BCX5316TA	Diodes Inc.	1	80	100	1	150	-65 to 150	SOT-89-3	Active
BCX53-16,115	Nexperia USA	1	80	100	1.3	145	-40 to 150	SOT-89	Active
BCP53T1G	onsemi	1.5	80	40	1.5	50	-65 to 150	SOT-223	Active
BCX53,115	Nexperia USA	1	80	63	1.3	145	-40 to 150	SOT-89	Active
BCX53-10,115	Nexperia USA	1	80	63	1.3	145	-40 to 150	SOT-89	Active
BCX53-10,135	Nexperia USA	1	80	63	1.3	145	-40 to 150	SOT-89	Active
BCX53-16,135	Nexperia USA	1	80	100	1.3	145	-40 to 150	SOT-89	Active
BCX53-16,146	Nexperia USA	1	80	100	1.3	145	-40 to 150	SOT-89	Active
BCX53-16-AU_R1_000A1	Panjit Int.	1	100	100	1.4	100	-40 to 150	SOT-89	Active
BCX5310H6327XTSA1	Infineon	1	80	63	2	125	-40 to 150	PG-SOT89	Last Time Buy

Engineering Selection Recommendations

Tier 1 - Direct Equivalents (Recommended Primary Substitutes):

BCX5316TA (Diodes Incorporated) and BCX53-16,115 (Nexperia USA Inc.) are the primary recommended substitutes. Both maintain the 1 A collector current rating, 80 V breakdown voltage, and 100 minimum hFE specification. BCX5316TA is active status from the original manufacturer family and operates across -65°C to 150°C. BCX53-16,115 is active status with automotive qualification (AEC-Q100) and enhanced power rating of 1.3 W, providing additional design margin.

Tier 2 - Functional Equivalents with Enhanced Specifications:

BCX53-16,135 and BCX53-16,146 (Nexperia USA Inc.) meet all core electrical requirements with identical hFE (100 @ 150 mA, 2 V) and 1.3 W power rating. Both carry automotive qualification (AEC-Q100) and active product status. These parts are suitable for applications where the reduced transition frequency (145 MHz versus 200 MHz) does not impact circuit performance.

Tier 3 - Functional Equivalents with Trade-offs:

BCX53,115 and BCX53-10,115 (Nexperia USA Inc.) provide 1 A collector current and 80 V breakdown voltage with automotive qualification. The minimum hFE is 63 @ 150 mA, 2 V, which is lower than the original specification of 100. These parts are suitable for applications with less stringent gain requirements.

Tier 4 - Higher Voltage Alternative:

BCX53-16-AU_R1_000A1 (Panjit International Inc.) offers 100 V collector-emitter breakdown voltage, providing enhanced voltage margin. This part maintains 1 A collector current and 100 hFE specification. Automotive qualification (AEC-Q101) is provided. The reduced transition frequency (100 MHz) may limit use in high-frequency applications.

Tier 5 - Higher Power Alternative:

BCP53T1G (onsemi) provides 1.5 A collector current and 1.5 W power dissipation in SOT-223 package. The minimum hFE is 40 @ 150 mA, 2 V, and transition frequency is 50 MHz. This part is suitable for applications requiring higher current capacity but with lower frequency requirements. Package change from SOT-89-3 to SOT-223 requires PCB layout modification.

Tier 6 - Last-Time-Buy Status:

BCX5310H6327XTSA1 (Infineon Technologies) is classified as Last Time Buy and should be avoided for new designs. While it meets core electrical specifications with 2 W power rating, the limited availability and end-of-life status make it unsuitable for production continuity.

Frequently Asked Questions (FAQ)

Q: Can BCX5316TA directly replace DCX53-16-13 without circuit modification?

A: Yes. BCX5316TA maintains identical collector current (1 A), breakdown voltage (80 V), saturation voltage (500 mV @ 50 mA, 500 mA), and minimum hFE (100 @ 150 mA, 2 V). The SOT-89-3 package is identical. The reduced transition frequency (150 MHz versus 200 MHz) does not affect DC circuit operation. Extended temperature range (-65°C to 150°C) provides additional margin.

Q: What is the difference between BCX53-16,115 and BCX53-16,135?

A: Both parts are manufactured by Nexperia USA Inc. and share identical electrical specifications: 1 A collector current, 80 V breakdown voltage, 100 hFE minimum, and 1.3 W power rating. The primary difference is packaging: BCX53-16,115 is supplied in Cut Tape (CT) & Digi-Reel format, while BCX53-16,135 is supplied in Tape & Reel (TR) format. Selection depends on procurement and assembly requirements.

Q: Why does BCP53T1G have lower hFE (40) compared to the original part (100)?

A: BCP53T1G is a different device family (BCP53 versus BCX53) with different gain characteristics. The lower hFE is a fundamental specification difference. This part is suitable only for applications where base drive current is not a limiting factor or where the higher collector current capability (1.5 A) and power rating (1.5 W) justify the gain trade-off.

Q: Is the SOT-223 package of BCP53T1G compatible with SOT-89-3 PCB layouts?

A: No. SOT-223 (TO-261-4) and SOT-89-3 (TO-243AA) are different package outlines with different pin configurations and footprints. PCB layout modification is required. SOT-223 is larger and has four leads versus three leads in SOT-89-3. Use BCP53T1G only if PCB redesign is acceptable.

Q: Which substitute part has the best automotive qualification?

A: Multiple parts carry automotive qualification. BCX53-16,115, BCX53-16,135, BCX53-16,146, and BCX53-10,115 all carry AEC-Q100 qualification from Nexperia USA Inc. BCX53-16-AU_R1_000A1 carries AEC-Q101 qualification from Panjit International Inc. (higher qualification level). BCX5310H6327XTSA1 carries AEC-Q101 from Infineon but is Last Time Buy status.

Q: Can I use BCX53,115 in place of BCX53-16,115?

A: BCX53,115 meets the core electrical requirements (1 A, 80 V, 500 mV saturation) but has lower minimum hFE (63 @ 150 mA, 2 V versus 100). This part is suitable only if the circuit design does not depend on the higher gain specification. Both parts are active status with identical packaging and automotive qualification.

Q: What is the temperature range difference between DCX53-16-13 and its substitutes?

A: DCX53-16-13 operates -55°C to 150°C. BCX5316TA extends the lower limit to -65°C. Nexperia parts (BCX53 series) specify -40°C to 150°C, which is narrower at the low end. For applications requiring -55°C operation, BCX5316TA or BCX5310H6327XTSA1 are required. For standard industrial applications (-40°C to 85°C), all active substitutes are suitable.

Q: Why is BCX5310H6327XTSA1 marked as Last Time Buy?

A: Last Time Buy status indicates the manufacturer has announced end-of-life for this product. Existing inventory is available for final orders, but no future production is planned. This part should not be selected for new designs. Use active-status alternatives such as BCX53-16,115 or BCX5316TA instead.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed carry ROHS3 Compliant status, matching the original DCX53-16-13. All parts also have Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture handling requirements during storage or assembly.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message