DCX53-13 Equivalent & Substitute Parts

Part Overview

The DCX53-13 is a Surface Mount PNP Bipolar Junction Transistor (BJT) manufactured by Diodes Incorporated, rated for 80 V collector-emitter breakdown voltage and 1 A maximum collector current in a SOT-89-3 package. This device is classified as Obsolete, indicating it is no longer in active production. Equivalent and substitute parts are necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this transistor topology.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Collector Current (Max)	1	A
Collector-Emitter Breakdown Voltage (Max)	80	V
Vce Saturation (Max)	500	mV @ 50mA, 500mA
Collector Cutoff Current (Max)	100	nA
DC Current Gain (hFE Min)	63	@ 150mA, 2V
Power Dissipation (Max)	1	W
Transition Frequency	200	MHz
Operating Temperature Range	-55 to 150	°C
Package Type	SOT-89-3 (TO-243AA)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the DCX53-13 is determined by electrical and mechanical compatibility across the following critical parameters:

Electrical Compatibility Criteria:

Transistor Type: PNP configuration required
Collector Current Rating: Minimum 1 A
Collector-Emitter Breakdown Voltage: Minimum 80 V
Vce Saturation: Maximum 500 mV @ specified bias conditions
Collector Cutoff Current: Maximum 100 nA
DC Current Gain (hFE): Minimum 40 (allows for process variation across the BCX53 family)
Power Dissipation: Minimum 1 W

Mechanical Compatibility Criteria:

Package: SOT-89-3 or SOT-89 (TO-243AA footprint compatible)
Mounting Type: Surface Mount

Compliance Requirements:

RoHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts are grouped into three categories: Direct Manufacturer Equivalents (same manufacturer, active production status), Manufacturer Recommended Alternatives (active production with enhanced specifications), and Parametric Equivalents (functionally compatible across all critical electrical parameters).

Parameter Comparison

Part Number	Manufacturer	Status	Ic (Max) [A]	Vce(br) [V]	Vce Sat [mV]	hFE Min	Power [W]	Freq [MHz]	Temp Range [°C]	Package
DCX53-13	Diodes Inc.	Obsolete	1	80	500	63	1	200	-55 to 150	SOT-89-3
BCX5310TA	Diodes Inc.	Active	1	80	500	63	1	150	-65 to 150	SOT-89-3
BCX5316TA	Diodes Inc.	Active	1	80	500	100	1	150	-65 to 150	SOT-89-3
BCX53TA	Diodes Inc.	Active	1	80	500	40	1	150	-65 to 150	SOT-89-3
BCX53,115	Nexperia USA	Active	1	80	500	63	1.3	145	-40 to 150	SOT-89
BCX53-10,115	Nexperia USA	Active	1	80	500	63	1.3	145	-40 to 150	SOT-89
BCX53,146	Nexperia USA	Active	1	80	500	63	1.3	145	-40 to 150	SOT-89
BCX53-10,135	Nexperia USA	Active	1	80	500	63	1.3	145	-40 to 150	SOT-89
2SB1260T100Q	Rohm Semiconductor	Not For New Designs	1	80	400	120	2	100	-40 to 150	MPT3
BCP53T1G	onsemi	Active	1.5	80	500	40	1.5	50	-65 to 150	SOT-223

Engineering Selection Recommendations

Primary Substitutes (Diodes Incorporated, Active Production):

BCX5310TA, BCX5316TA, and BCX53TA are direct substitutes manufactured by Diodes Incorporated and maintain active production status. These parts are electrically compatible with the DCX53-13 across all critical parameters and share the same SOT-89-3 package footprint. BCX5310TA and BCX53TA are recommended as primary alternatives due to identical electrical specifications and packaging. BCX5316TA offers enhanced DC current gain (hFE Min = 100) for applications requiring higher gain performance.

Secondary Substitutes (Nexperia USA Inc., Active Production, Automotive Grade):

BCX53,115, BCX53-10,115, BCX53,146, and BCX53-10,135 are manufactured by Nexperia USA Inc. and carry AEC-Q100 automotive qualification. These parts meet all electrical requirements and are available in SOT-89 packaging (TO-243AA footprint compatible). Enhanced power dissipation rating (1.3 W versus 1 W) provides additional thermal margin. These variants are suitable for applications requiring automotive-grade components.

Alternative Substitute (Rohm Semiconductor, Not For New Designs):

2SB1260T100Q is classified as Not For New Designs and is supplied in MPT3 package (different footprint from SOT-89-3). This part exhibits lower transition frequency (100 MHz) and different saturation voltage characteristics (400 mV). Selection of this part is not recommended for new designs.

Package-Variant Substitute (onsemi, Active Production):

BCP53T1G is supplied in SOT-223 (TO-261) package, which differs from the SOT-89-3 footprint of the DCX53-13. This part offers higher collector current rating (1.5 A) and power dissipation (1.5 W) but operates at lower transition frequency (50 MHz). PCB layout modification is required for this substitution.

Frequently Asked Questions (FAQ)

Q: Can BCX5310TA directly replace DCX53-13 without circuit modification?

A: BCX5310TA is electrically compatible with DCX53-13 across all critical parameters (Ic, Vce(br), Vce Sat, hFE, Power) and shares the same SOT-89-3 package footprint. Direct substitution is supported without circuit modification.

Q: What is the difference between BCX5310TA and BCX5316TA?

A: Both parts are manufactured by Diodes Incorporated and share identical electrical ratings except for DC current gain. BCX5310TA specifies hFE Min = 63, while BCX5316TA specifies hFE Min = 100. Selection depends on circuit gain requirements.

Q: Why is 2SB1260T100Q listed as a substitute if it is Not For New Designs?

A: 2SB1260T100Q meets the electrical compatibility criteria for substitution but carries a Not For New Designs status from the manufacturer. This part is included for reference in legacy system support scenarios only. New designs should utilize active production alternatives.

Q: Are Nexperia BCX53 variants suitable for automotive applications?

A: Yes. BCX53,115, BCX53-10,115, BCX53,146, and BCX53-10,135 carry AEC-Q100 automotive qualification and are suitable for automotive-grade applications. These parts are available in active production status.

Q: Can BCP53T1G be used as a substitute if the PCB layout is modified?

A: BCP53T1G is electrically compatible with DCX53-13 across critical parameters but requires PCB layout modification due to different package type (SOT-223 versus SOT-89-3). The higher collector current rating (1.5 A) and power dissipation (1.5 W) provide additional design margin. Transition frequency is lower (50 MHz), which may impact high-frequency circuit performance.

Q: What is the significance of the operating temperature range difference between DCX53-13 and substitute parts?

A: DCX53-13 specifies -55°C to 150°C, while most active substitutes specify -65°C to 150°C or -40°C to 150°C. Substitutes with extended lower temperature range (-65°C) provide enhanced cold-temperature performance. Substitutes with limited lower range (-40°C) are suitable for commercial and automotive applications but not for military or extreme cold-environment specifications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed meet RoHS3 compliance requirements and carry Moisture Sensitivity Level 1 (Unlimited), matching the DCX53-13 environmental specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message