DCX51-16-13 Equivalent & Substitute Parts

Part Overview

The DCX51-16-13 is a PNP bipolar junction transistor manufactured by Diodes Incorporated, rated for 45 V collector-emitter breakdown voltage and 1 A maximum collector current. The device is packaged in SOT-89-3 surface mount configuration with a maximum power dissipation of 1 W and transition frequency of 200 MHz. The part is classified as obsolete, necessitating identification of active equivalent and substitute components for new designs and ongoing production requirements. Substitute parts are selected based on matching or exceeding critical electrical parameters while maintaining compatible packaging and thermal characteristics.

Key Parameters

Parameter	DCX51-16-13	Unit
Transistor Type	PNP	—
Collector Current (Max)	1	A
Collector-Emitter Breakdown Voltage (Max)	45	V
Vce Saturation (Max)	500	mV @ 50mA, 500mA
DC Current Gain (hFE Min)	100	@ 150mA, 2V
Power Dissipation (Max)	1	W
Transition Frequency	200	MHz
Operating Temperature Range	-55 to 150	°C
Package Type	SOT-89-3	—
Product Status	Obsolete	—

Substitute Part Grouping Explanation

Substitute parts are organized into two functional categories based on transistor polarity and electrical parameter compatibility:

Category 1: PNP Direct Substitutes (Matching Polarity) These parts maintain PNP polarity and are suitable for direct replacement in existing circuit designs. Selection is based on matching or exceeding the following critical parameters:

Collector current rating: minimum 1 A
Collector-emitter breakdown voltage: minimum 45 V
Vce saturation: 500 mV or lower at specified bias conditions
DC current gain: minimum 100 at 150 mA, 2 V
Package: SOT-89 or SOT-89-3 surface mount
Product status: Active

Category 2: NPN Complementary Substitutes (Polarity Reversal) These parts feature NPN polarity and require circuit redesign for implementation. They are listed as manufacturer-recommended alternatives where circuit topology permits polarity inversion. Selection criteria include:

Collector current rating: minimum 1 A
Collector-emitter breakdown voltage: minimum 45 V
Vce saturation: 500 mV or lower at specified bias conditions
Package: SOT-89 surface mount
Product status: Active

Category 3: Higher Current PNP Alternatives These parts exceed the 1 A collector current specification and are suitable for applications requiring increased current handling capacity while maintaining PNP polarity.

Parameter Comparison

Part Number	Manufacturer	Type	Ic (Max) A	Vce(br) V	Vce Sat mV	hFE (Min)	Pmax W	fT MHz	Toper °C	Package	Status
DCX51-16-13	Diodes Inc.	PNP	1	45	500	100	1	200	-55 to 150	SOT-89-3	Obsolete
BCX5116TA	Diodes Inc.	PNP	1	45	500	100	1	150	-65 to 150	SOT-89-3	Active
BCX5316TA	Diodes Inc.	PNP	1	80	500	100	1	150	-65 to 150	SOT-89-3	Active
BCX51-16,115	Nexperia USA	PNP	1	45	500	100	1.3	145	-55 to 150	SOT-89	Active
BCX54,115	NXP Semi.	NPN	1	45	500	63	1.25	180	-55 to 150	SOT-89	Active
BCX54-10,115	Nexperia USA	NPN	1	45	500	63	1.25	180	-55 to 150	SOT-89	Active
BCX54-16,115	Nexperia USA	NPN	1	45	500	100	1.25	180	-55 to 150	SOT-89	Active
BCX54-16,135	Nexperia USA	NPN	1	45	500	100	1.25	180	-55 to 150	SOT-89	Active
NSS40300MZ4T1G	onsemi	PNP	3	40	400	175	2	160	-55 to 150	SOT-223	Active
PXT2222A,115	Nexperia USA	NPN	0.6	40	1000	100	1.1	300	-55 to 150	SOT-89	Active
PXT4401,115	NXP USA	NPN	0.6	40	750	100	1.1	250	-55 to 150	SOT-89	Active

Engineering Selection Recommendations

Primary Recommendation: BCX51-16,115 (Nexperia USA Inc.)

The BCX51-16,115 is the preferred direct substitute for the obsolete DCX51-16-13. This part maintains PNP polarity, matches all critical electrical parameters including 1 A collector current, 45 V breakdown voltage, 500 mV saturation voltage, and 100 minimum hFE. The device is AEC-Q100 qualified for automotive applications and carries active product status. Operating temperature range extends to -55°C, matching the original specification. Power dissipation is rated at 1.3 W, exceeding the 1 W requirement. The SOT-89 package is mechanically and electrically compatible with SOT-89-3. RoHS3 compliance and unlimited moisture sensitivity level (MSL 1) are maintained.

Secondary Recommendation: BCX5116TA (Diodes Incorporated)

The BCX5116TA provides an alternative PNP substitute with identical electrical specifications to the primary recommendation. This part is manufactured by the same supplier as the original DCX51-16-13, ensuring design continuity. Collector current, breakdown voltage, saturation voltage, and current gain parameters match the original device. Operating temperature range extends to -65°C. Transition frequency is rated at 150 MHz, lower than the original 200 MHz specification. The part is available in Tape & Reel packaging and carries active product status with RoHS3 compliance.

Higher Voltage Alternative: BCX5316TA (Diodes Incorporated)

The BCX5316TA is suitable for applications requiring increased voltage margin. This PNP device maintains 1 A collector current and identical saturation characteristics while providing 80 V collector-emitter breakdown voltage, exceeding the 45 V requirement by 78%. All other electrical parameters match the original specification. This part is recommended for circuits operating near the 45 V limit or requiring additional design margin.

Higher Current Alternative: NSS40300MZ4T1G (onsemi)

The NSS40300MZ4T1G is a PNP transistor rated for 3 A collector current, suitable for applications requiring increased current handling. This device maintains PNP polarity and operates across the same temperature range as the original. The part is packaged in SOT-223 (TO-261), which is larger than SOT-89-3 and requires PCB layout modification. Collector-emitter breakdown voltage is 40 V, below the 45 V specification, and saturation voltage is 400 mV at higher bias conditions. This part is recommended only when increased current capacity justifies package change and voltage derating.

NPN Complementary Options: BCX54 Series (Nexperia USA Inc., NXP Semiconductors)

The BCX54-16,115, BCX54-10,115, and BCX54,115 are NPN complementary transistors with identical 1 A collector current and 45 V breakdown voltage ratings. These parts feature 180 MHz transition frequency, exceeding the original 200 MHz specification. DC current gain is 63 minimum for BCX54,115 and BCX54-10,115, and 100 minimum for BCX54-16,115. These devices are suitable only for circuits where NPN polarity is acceptable or where complementary pair operation is required. All variants carry active product status and RoHS3 compliance.

Not Recommended: PXT2222A,115 and PXT4401,115

The PXT2222A,115 and PXT4401,115 are NPN transistors with reduced collector current ratings (600 mA maximum), below the 1 A requirement. These parts also feature lower breakdown voltage (40 V) and higher saturation voltage (1 V and 750 mV respectively) compared to the original specification. These devices are not suitable as direct substitutes for the DCX51-16-13.

Frequently Asked Questions (FAQ)

Q: Can the BCX51-16,115 be used as a direct replacement for the DCX51-16-13 without circuit modification?

A: Yes. The BCX51-16,115 maintains PNP polarity and matches all critical electrical parameters: 1 A collector current, 45 V breakdown voltage, 500 mV saturation voltage, and 100 minimum hFE. The SOT-89 package is mechanically and electrically compatible with SOT-89-3. No circuit redesign is required.

Q: What is the difference between SOT-89-3 and SOT-89 packaging?

A: SOT-89-3 and SOT-89 are equivalent surface mount packages for three-terminal devices. Both designations refer to the same physical form factor with identical pin spacing and thermal characteristics. Parts specified as SOT-89 are directly compatible with SOT-89-3 footprints.

Q: Why are NPN transistors listed as substitutes if the original part is PNP?

A: NPN transistors are listed as manufacturer-recommended alternatives for applications where circuit topology permits polarity inversion. These parts are not direct replacements and require circuit redesign. They are provided for reference only in applications where complementary operation or NPN functionality is acceptable.

Q: Can the BCX5316TA be used in place of the DCX51-16-13 in all applications?

A: The BCX5316TA is suitable for most applications. The primary difference is increased collector-emitter breakdown voltage (80 V versus 45 V), which provides additional design margin and is not detrimental to circuit operation. Transition frequency is reduced from 200 MHz to 150 MHz; this is acceptable for applications not requiring the higher frequency response of the original part.

Q: What is the significance of the AEC-Q100 qualification on the BCX51-16,115?

A: AEC-Q100 qualification indicates the part meets automotive industry reliability and quality standards. This certification is relevant only for automotive applications. For non-automotive use, this qualification does not affect part selection.

Q: Is the NSS40300MZ4T1G a suitable substitute for high-current applications?

A: The NSS40300MZ4T1G is rated for 3 A collector current and is suitable for applications requiring increased current handling. However, the part requires PCB layout modification due to SOT-223 packaging (larger than SOT-89-3) and operates at 40 V breakdown voltage, below the original 45 V specification. Use this part only when increased current capacity justifies these trade-offs.

Q: What is the operating temperature range difference between the DCX51-16-13 and BCX5116TA?

A: The DCX51-16-13 operates from -55°C to 150°C. The BCX5116TA extends the lower temperature limit to -65°C, providing 10°C additional margin at low temperatures. This extended range is beneficial for applications in extreme cold environments but is not required for standard industrial temperature ranges.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts carry RoHS3 compliance certification, matching the environmental compliance status of the original DCX51-16-13.

Q: What is the primary reason for the DCX51-16-13 obsolescence?

A: The DCX51-16-13 is classified as obsolete, indicating the manufacturer has discontinued production. Active equivalent parts such as BCX51-16,115 and BCX5116TA are available from alternative manufacturers and provide identical or superior electrical performance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message