DCP69-25-13 Equivalent & Substitute Parts

Part Overview

The DCP69-25-13 is a Surface Mount PNP Bipolar Junction Transistor (BJT) manufactured by Diodes Incorporated, rated for 20V collector-emitter breakdown voltage and 1A maximum collector current. This component is classified as Obsolete, necessitating identification of equivalent and substitute parts for ongoing design requirements and procurement needs. The part is housed in a SOT-223-3 package and operates across a temperature range of -55°C to 150°C.

Key Parameters

Parameter	Value
Transistor Type	PNP
Current - Collector (Ic) (Max)	1 A
Voltage - Collector Emitter Breakdown (Max)	20 V
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 1A
Current - Collector Cutoff (Max)	100nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce	160 @ 500mA, 1V
Power - Max	1 W
Frequency - Transition	200MHz
Operating Temperature	-55°C ~ 150°C (TJ)
Mounting Type	Surface Mount
Package / Case	TO-261-4, TO-261AA
Supplier Device Package	SOT-223-3
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the DCP69-25-13 is determined by electrical and mechanical compatibility across the following critical parameters:

Electrical Compatibility Criteria:

Transistor Type: PNP configuration required
Voltage - Collector Emitter Breakdown (Max): Minimum 20V
Current - Collector (Ic) (Max): Minimum 1A
Vce Saturation (Max) @ Ib, Ic: 500mV @ 100mA, 1A or lower
Current - Collector Cutoff (Max): 100nA (ICBO) or lower
Operating Temperature Range: Must encompass -55°C to 150°C or higher

Mechanical Compatibility Criteria:

Mounting Type: Surface Mount required
Package / Case: TO-261-4 or TO-261AA
Supplier Device Package: SOT-223 or SOT-223-3

Compliance Requirements:

RoHS3 Compliant
Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts are grouped into two categories: Direct equivalents (matching all electrical and mechanical parameters) and functional substitutes (meeting minimum electrical requirements with potential trade-offs in secondary parameters such as transition frequency or power dissipation).

Parameter Comparison

Part Number	Manufacturer	Product Status	Ic (Max)	Vce Breakdown (Max)	Vce Sat @ Ib, Ic	hFE (Min) @ Ic, Vce	Power (Max)	Frequency - Transition	Operating Temp	Package	Automotive Grade
DCP69-25-13	Diodes Incorporated	Obsolete	1 A	20 V	500mV @ 100mA, 1A	160 @ 500mA, 1V	1 W	200MHz	-55°C ~ 150°C	SOT-223-3	No
DCP69-13	Diodes Incorporated	Active	1 A	20 V	500mV @ 100mA, 1A	85 @ 500mA, 1V	1 W	200MHz	-55°C ~ 150°C	SOT-223-3	No
BCP69,115	Nexperia USA Inc.	Active	1 A	20 V	500mV @ 100mA, 1A	85 @ 500mA, 1V	1.4 W	140MHz	-40°C ~ 150°C	SOT-223	Yes (AEC-Q100)
BCP69,135	Nexperia USA Inc.	Active	1 A	20 V	500mV @ 100mA, 1A	85 @ 500mA, 1V	1.4 W	140MHz	-40°C ~ 150°C	SOT-223	Yes (AEC-Q100)
BCP69-16,115	Nexperia USA Inc.	Active	1 A	20 V	500mV @ 100mA, 1A	100 @ 500mA, 1V	1.4 W	140MHz	-40°C ~ 150°C	SOT-223	Yes (AEC-Q100)
BCP69-25,115	Nexperia USA Inc.	Active	2 A	20 V	500mV @ 100mA, 1A	160 @ 500mA, 1V	650 mW	140MHz	-40°C ~ 150°C	SOT-223	Yes (AEC-Q100)
BCP69-25,135	Nexperia USA Inc.	Active	2 A	20 V	600mV @ 200mA, 2A	100 @ 500mA, 1V	650 mW	140MHz	-40°C ~ 150°C	SOT-223	Yes (AEC-Q100)
BCP69T1G	onsemi	Active	1 A	20 V	500mV @ 100mA, 1A	85 @ 500mA, 1V	1.5 W	60MHz	-65°C ~ 150°C	SOT-223 (TO-261)	No

Engineering Selection Recommendations

Primary Recommendation: DCP69-13

The DCP69-13 is the direct equivalent substitute for the obsolete DCP69-25-13. Both parts are manufactured by Diodes Incorporated, share identical electrical specifications for collector current, breakdown voltage, and saturation characteristics, and are housed in the same SOT-223-3 package. The DCP69-13 maintains Active product status and is currently in stock. This part is suitable for direct replacement in existing designs without circuit modification.

Secondary Recommendations: BCP69 Series (Nexperia USA Inc.)

The BCP69,115, BCP69,135, and BCP69-16,115 variants meet all minimum electrical requirements for 1A collector current and 20V breakdown voltage. These parts carry Automotive Grade qualification with AEC-Q100 certification, making them suitable for automotive and industrial applications requiring enhanced reliability standards. The BCP69-25,115 and BCP69-25,135 variants provide increased collector current capability (2A) and are qualified for automotive applications.

Alternative Recommendation: BCP69T1G

The BCP69T1G manufactured by onsemi provides functional substitution with extended operating temperature range (-65°C to 150°C). This part meets all electrical requirements for 1A operation and 20V breakdown voltage. The lower transition frequency (60MHz versus 200MHz) may impact performance in high-frequency switching applications.

Compliance Considerations:

All substitute parts maintain RoHS3 compliance and Moisture Sensitivity Level 1 (Unlimited) ratings, consistent with the original DCP69-25-13 specification. Nexperia BCP69 variants include automotive-grade qualification, providing additional assurance for mission-critical applications.

Frequently Asked Questions (FAQ)

Q: Can the DCP69-13 be used as a direct replacement for the DCP69-25-13?

A: Yes. The DCP69-13 is electrically and mechanically equivalent to the DCP69-25-13. Both parts share identical collector current (1A), breakdown voltage (20V), saturation characteristics, and SOT-223-3 packaging. The primary difference is product status: DCP69-13 is Active while DCP69-25-13 is Obsolete.

Q: What is the difference between the Nexperia BCP69 variants (BCP69,115 vs. BCP69,135 vs. BCP69-16,115)?

A: All three variants meet the 1A collector current and 20V breakdown voltage requirements. The primary differences are DC current gain specifications: BCP69,115 and BCP69,135 specify 85 @ 500mA, 1V, while BCP69-16,115 specifies 100 @ 500mA, 1V. All three carry AEC-Q100 automotive qualification.

Q: Can BCP69-25,115 or BCP69-25,135 be used in place of DCP69-25-13?

A: These parts are functionally compatible for applications requiring 1A operation, as they support 2A maximum collector current. However, they are rated for 650mW power dissipation compared to the original 1W specification. Thermal design verification is required for applications operating near maximum power limits.

Q: What is the impact of using BCP69T1G with its 60MHz transition frequency instead of the original 200MHz?

A: The BCP69T1G transition frequency is lower than the DCP69-25-13. This substitution is suitable for DC and low-frequency switching applications. High-frequency switching circuits operating above 60MHz may experience performance degradation and require circuit re-evaluation.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed maintain RoHS3 compliance and Moisture Sensitivity Level 1 (Unlimited) ratings, consistent with the original DCP69-25-13 specification.

Q: Which substitute part is recommended for automotive applications?

A: The Nexperia BCP69 series (BCP69,115, BCP69,135, BCP69-16,115, BCP69-25,115, and BCP69-25,135) carry Automotive Grade qualification with AEC-Q100 certification. These parts are suitable for automotive and industrial applications requiring enhanced reliability standards.

Q: What is the operating temperature range difference between substitutes?

A: The original DCP69-25-13 and DCP69-13 operate from -55°C to 150°C. Nexperia BCP69 variants operate from -40°C to 150°C (narrower low-temperature range). The BCP69T1G extends to -65°C to 150°C (wider low-temperature range). Application requirements determine which temperature range is appropriate.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message