DCP53-13 Equivalent & Substitute Parts

Part Overview

The DCP53-13 is a Surface Mount PNP Bipolar Junction Transistor (BJT) manufactured by Diodes Incorporated, rated for 80 V collector-emitter breakdown voltage and 1 A maximum collector current in a SOT-223-3 package. This device is classified as Obsolete, which necessitates identification of active equivalent and substitute parts for ongoing design support and procurement.

The DCP53-13 operates across a temperature range of -55°C to 150°C with a maximum power dissipation of 1 W and transition frequency of 200 MHz. The part is ROHS3 compliant with MSL Level 1 (Unlimited moisture sensitivity).

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Collector Current (Ic) Maximum	1	A
Collector-Emitter Breakdown Voltage (Vceo)	80	V
Vce Saturation @ Ib, Ic	500 mV @ 50 mA, 500 mA	—
Collector Cutoff Current (Icbo)	100	nA
DC Current Gain (hFE) @ Ic, Vce	40 @ 150 mA, 2 V	—
Power Dissipation Maximum	1	W
Transition Frequency (fT)	200	MHz
Operating Temperature Range	-55 to 150	°C
Package Type	SOT-223-3	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
MSL Rating	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the DCP53-13 is determined by electrical and mechanical compatibility across the following critical parameters:

Mandatory Compatibility Criteria:

Transistor Type: PNP (required for circuit polarity)
Collector-Emitter Breakdown Voltage: 80 V minimum
Collector Current Rating: 1 A minimum
Package: SOT-223-3 or equivalent mechanical footprint (TO-261-4, TO-261AA)
Mounting Type: Surface Mount
Vce Saturation: 500 mV @ 50 mA, 500 mA
Collector Cutoff Current: 100 nA maximum

Flexible Parameters (allowing substitution with different values):

DC Current Gain (hFE): 40 minimum acceptable; higher values (63, 100) are acceptable
Power Dissipation: 1 W minimum; higher ratings (1.5 W, 2 W) are acceptable
Transition Frequency: 50 MHz minimum; higher frequencies (125 MHz, 145 MHz, 150 MHz, 200 MHz) are acceptable
Operating Temperature Range: -55°C minimum; extended ranges (-65°C) are acceptable
Product Status: Active parts preferred over Obsolete

Substitute parts are grouped into three categories: Direct Manufacturer Substitutes (same manufacturer, active status), Similar Parts (alternative manufacturers, active status), and Parametric Equivalents (matching electrical specifications).

Parameter Comparison

Part Number	Manufacturer	Product Status	Ic (Max) A	Vceo V	hFE @ 150mA, 2V	Power W	fT MHz	Temp Range °C	Package
DCP53-13	Diodes Incorporated	Obsolete	1	80	40	1	200	-55 to 150	SOT-223-3
BCP5316TA	Diodes Incorporated	Active	1	80	100	2	150	-65 to 150	SOT-223-3
BCP53TA	Diodes Incorporated	Active	1	80	40	2	150	-65 to 150	SOT-223-3
BCP53T1G	onsemi	Active	1.5	80	40	1.5	50	-65 to 150	SOT-223
BCP53-16,135	Nexperia USA Inc.	Active	1	80	100	1	145	-55 to 150	SOT-223
BCP5316H6433XTMA1	Infineon Technologies	Last Time Buy	1	80	100	2	125	-55 to 150	SOT-223-4
BCP53F	Nexperia USA Inc.	Active	1	80	100	—	145	-55 to 150	SOT-223
BCP53,115	Nexperia USA Inc.	Active	1	80	63	1	145	-55 to 150	SOT-223
BCP53-10,115	Nexperia USA Inc.	Active	1	80	63	1	145	-55 to 150	SOT-223
BCP53-16,115	Nexperia USA Inc.	Active	1	80	100	1	145	-55 to 150	SOT-223

Engineering Selection Recommendations

Primary Substitutes (Diodes Incorporated):

BCP53TA and BCP5316TA are direct substitutes from the original manufacturer. BCP53TA maintains the 40 hFE specification of the DCP53-13 while offering increased power dissipation (2 W) and extended temperature range (-65°C to 150°C). BCP5316TA provides higher current gain (hFE 100) with equivalent electrical performance. Both parts are Active status and ROHS3 compliant.

Secondary Substitutes (Nexperia USA Inc.):

BCP53-16,135, BCP53-16,115, BCP53,115, and BCP53-10,115 are Nexperia equivalents with identical electrical ratings (80 V, 1 A, SOT-223 package). These parts carry AEC-Q100 automotive qualification and are suitable for applications requiring automotive-grade components. BCP53F is an automotive-qualified variant (AEC-Q101) with identical electrical specifications.

Alternative Substitute (onsemi):

BCP53T1G from onsemi provides higher collector current (1.5 A) and power dissipation (1.5 W) in SOT-223 package. This part is suitable for applications requiring increased current handling capacity while maintaining 80 V breakdown voltage and 1 A minimum rating.

Avoid:

BCP5316H6433XTMA1 from Infineon Technologies carries Last Time Buy status and should not be selected for new designs requiring long-term availability.

Frequently Asked Questions (FAQ)

Q: Can BCP53TA directly replace DCP53-13 in existing designs?

A: Yes. BCP53TA maintains identical electrical specifications (80 V, 1 A, 40 hFE @ 150 mA, 2 V) and SOT-223-3 package compatibility. The increased power rating (2 W vs. 1 W) and extended temperature range (-65°C to 150°C) provide enhanced performance margins.

Q: What is the difference between BCP53TA and BCP5316TA?

A: Both are Diodes Incorporated active substitutes with identical voltage and current ratings. BCP5316TA specifies higher DC current gain (hFE 100 vs. 40), which may reduce base drive requirements in circuit designs. Both are ROHS3 compliant and available in SOT-223-3 package.

Q: Are Nexperia BCP53 variants suitable for automotive applications?

A: Yes. BCP53-16,135, BCP53-16,115, BCP53,115, BCP53-10,115, and BCP53F carry AEC-Q100 or AEC-Q101 automotive qualification. These parts are suitable for automotive-grade designs requiring equivalent electrical performance to DCP53-13.

Q: Does BCP53T1G from onsemi require circuit redesign?

A: No circuit redesign is required for basic substitution. BCP53T1G maintains 80 V breakdown voltage, 1 A minimum collector current, and SOT-223 package compatibility. The higher current rating (1.5 A) and power dissipation (1.5 W) provide additional design margin without affecting circuit operation.

Q: What is the significance of the hFE specification differences?

A: DC current gain (hFE) determines base drive requirements. DCP53-13 specifies hFE 40 minimum. Substitutes with higher hFE (63, 100) require less base current for equivalent collector current, potentially reducing driver circuit complexity. Lower hFE values are not acceptable substitutes.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance status, matching the DCP53-13 environmental specification.

Q: Can parts with different temperature ranges be substituted?

A: Yes, provided the application operating temperature falls within the substitute part's range. BCP53TA and BCP5316TA extend the minimum temperature to -65°C, suitable for extended-range applications. Nexperia variants maintain -55°C minimum, matching DCP53-13 specification.

Q: What packaging considerations apply to SOT-223 vs. SOT-223-3?

A: SOT-223-3 and SOT-223 are mechanically equivalent three-lead packages with identical footprints (TO-261-4, TO-261AA). All listed substitutes are compatible with existing PCB layouts designed for DCP53-13.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message