DCP52-13 Equivalent & Substitute Parts

Part Overview

The DCP52-13 is a PNP bipolar junction transistor manufactured by Diodes Incorporated, rated for 60 V collector-emitter breakdown voltage and 1 A maximum collector current. The device is housed in a SOT-223-3 surface mount package and is designed for general-purpose switching and amplification applications. The DCP52-13 is classified as obsolete, necessitating identification of active equivalent and substitute parts for new designs and ongoing production requirements. Substitute parts must maintain electrical compatibility within the specified parameter ranges while offering active product status and continued availability.

Key Parameters

Parameter	DCP52-13 Value	Unit
Transistor Type	PNP	—
Collector Current (Ic) Max	1	A
Collector-Emitter Breakdown Voltage (Max)	60	V
Vce Saturation (Max)	500	mV @ 50mA, 500mA
Collector Cutoff Current (ICBO)	100	nA
DC Current Gain (hFE) Min	40	@ 150mA, 2V
Power Dissipation (Max)	1	W
Transition Frequency	200	MHz
Operating Temperature Range	-55 to 150	°C
Mounting Type	Surface Mount	—
Package	SOT-223-3	—
RoHS Status	ROHS3 Compliant	—
MSL Rating	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the DCP52-13 are selected based on electrical parameter compatibility within the following criteria:

Primary Compatibility Parameters:

Transistor type: PNP
Collector current rating: 1 A or greater
Collector-emitter breakdown voltage: 60 V or greater
Vce saturation: 500 mV or less at specified bias conditions
Collector cutoff current: 100 nA or less
DC current gain (hFE): 40 or greater at specified conditions
Power dissipation: 1 W or greater
Mounting type: Surface Mount
Package family: SOT-223 variants

Substitution Logic: Parts are grouped into three categories based on electrical performance relative to the DCP52-13:

Direct Equivalents (Active Status): Parts with identical or superior electrical ratings, same package family, and active product status. These provide one-to-one replacement capability.
Enhanced Performance Substitutes: Parts with higher voltage or current ratings, superior power dissipation, or improved frequency response while maintaining backward compatibility with the DCP52-13 application envelope.
Functional Alternatives: Parts with lower voltage ratings (45 V) or reduced power dissipation that remain suitable for applications not requiring the full 60 V rating, provided collector current and gain specifications are met.

Parameter Comparison

Part Number	Manufacturer	Status	Ic (A)	Vce(br) (V)	hFE Min	Power (W)	Freq (MHz)	Temp Range (°C)	Package
DCP52-13	Diodes Inc.	Obsolete	1	60	40	1	200	-55 to 150	SOT-223-3
BCP52TA	Diodes Inc.	Active	1	60	40	2	125	-65 to 150	SOT-223-3
BCP5316TA	Diodes Inc.	Active	1	80	100	2	150	-65 to 150	SOT-223-3
BCP51-16,115	Nexperia USA	Active	1	45	100	1	145	-55 to 150	SOT-223
BCP51-16-TP	Micro Commercial	Active	1	45	100	0.3	100	-55 to 150	SOT-223
BCP52,135	Nexperia USA	Active	1	60	63	1	145	-55 to 150	SOT-223
BCP52-10,135	Nexperia USA	Active	1	60	63	1.3	145	-55 to 150	SOT-223
BCP52-16,115	Nexperia USA	Active	1	60	100	1	145	-55 to 150	SOT-223
BSP31,115	NXP USA	Active	1	60	100	1.3	100	-55 to 150	SOT-223
NSS60600MZ4T1G	onsemi	Active	6	60	120	0.8	100	-55 to 150	SOT-223
NZT660	Fairchild Semi.	Active	3	60	100	2	75	-55 to 150	SOT-223-4

Engineering Selection Recommendations

Direct Replacement (Preferred):

BCP52TA (Diodes Incorporated) is the primary direct replacement for the DCP52-13. Both devices are manufactured by Diodes Incorporated, share identical collector current and voltage ratings, and are housed in the SOT-223-3 package. BCP52TA offers enhanced power dissipation (2 W versus 1 W) and extended lower operating temperature limit (-65°C versus -55°C), providing superior thermal margin and cold-temperature performance. BCP52TA is active product status with 28,200 units in stock.

Automotive-Grade Alternatives:

BCP52,135, BCP52-10,135, and BCP52-16,115 (all Nexperia USA Inc.) are automotive-qualified alternatives meeting AEC-Q100 requirements. These parts maintain the 60 V / 1 A electrical envelope with improved DC current gain (63–100 hFE minimum) and are suitable for applications requiring automotive-grade component certification. Operating temperature range is -55°C to 150°C. BCP52,135 and BCP52-16,115 maintain 1 W power dissipation; BCP52-10,135 provides 1.3 W.

Enhanced Voltage Rating:

BCP5316TA (Diodes Incorporated) provides 80 V collector-emitter breakdown voltage while maintaining 1 A collector current and SOT-223-3 packaging. This part is suitable for applications requiring higher voltage margin. DC current gain is 100 hFE minimum. Active product status with 1,485 units in stock.

Higher Current Capability:

NZT660 (Fairchild Semiconductor) and NSS60600MZ4T1G (onsemi) provide collector current ratings of 3 A and 6 A respectively, maintaining 60 V voltage rating. These parts are suitable for applications requiring higher current handling while preserving the 60 V electrical envelope. Both are active product status.

Lower Voltage Applications:

BCP51-16,115 (Nexperia USA Inc., automotive-qualified) and BCP51-16-TP (Micro Commercial Co.) are suitable for applications where 45 V collector-emitter breakdown voltage is sufficient. Both maintain 1 A collector current and 100 hFE minimum gain. BCP51-16,115 provides 1 W power dissipation; BCP51-16-TP provides 300 mW.

Compliance Status:

All recommended substitute parts are RoHS3 compliant with MSL rating of 1 (Unlimited) or equivalent moisture sensitivity classification. All parts maintain REACH unaffected status and EAR99 export classification consistent with the DCP52-13.

Frequently Asked Questions (FAQ)

Q: Can BCP52TA directly replace DCP52-13 in existing designs?

A: Yes. BCP52TA is a direct replacement with identical electrical ratings (1 A, 60 V, 40 hFE minimum) and SOT-223-3 packaging. The enhanced power dissipation (2 W) and extended temperature range provide additional design margin. Pin configuration and package footprint are compatible.

Q: What is the difference between BCP52TA and BCP52,135?

A: BCP52TA is manufactured by Diodes Incorporated with 125 MHz transition frequency and 2 W power dissipation. BCP52,135 is manufactured by Nexperia USA Inc., is automotive-qualified (AEC-Q100), has 145 MHz transition frequency, and 1 W power dissipation. Both maintain 60 V / 1 A ratings. Selection depends on automotive qualification requirement and frequency performance needs.

Q: Why is BCP51-16,115 listed as a substitute if it has only 45 V rating?

A: BCP51-16,115 is a functional alternative for applications where the full 60 V collector-emitter breakdown voltage is not required. It maintains 1 A collector current, 100 hFE minimum gain, and is automotive-qualified. Use this part only if circuit design confirms that 45 V voltage margin is adequate.

Q: What is the advantage of NZT660 over DCP52-13?

A: NZT660 provides 3 A collector current capability (versus 1 A) while maintaining 60 V voltage rating and 2 W power dissipation. This part is suitable for applications requiring higher current handling. Transition frequency is lower (75 MHz versus 200 MHz), which may limit high-frequency applications.

Q: Are all substitute parts available in the same packaging?

A: Most substitute parts use SOT-223 or SOT-223-3 packaging, which are mechanically and electrically compatible. NZT660 uses SOT-223-4 variant. Verify PCB footprint compatibility before design implementation. All parts are surface mount with TO-261-4 or TO-261AA case designations.

Q: Which substitute part offers the best thermal performance?

A: BCP5316TA and NZT660 both offer 2 W power dissipation, providing superior thermal margin compared to the DCP52-13 (1 W). BCP52TA also provides 2 W dissipation. For applications with high power density, these parts reduce junction temperature rise.

Q: Is automotive qualification required for my application?

A: Automotive qualification (AEC-Q100) is required only for automotive-grade applications. BCP52,135, BCP52-10,135, BCP52-16,115, and BCP51-16,115 carry AEC-Q100 qualification. Standard industrial applications do not require this certification. Verify application requirements before part selection.

Q: Can NSS60600MZ4T1G be used in place of DCP52-13?

A: NSS60600MZ4T1G is electrically compatible (60 V, 100 hFE minimum) but provides 6 A collector current capability. This part is suitable only if the application can accommodate higher current rating. The lower power dissipation (800 mW) may require thermal design review. Verify circuit design compatibility before substitution.

Q: What is the moisture sensitivity level (MSL) for substitute parts?

A: All recommended substitute parts carry MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions. Storage and handling requirements are equivalent to the DCP52-13. Standard PCB assembly processes are compatible without special precautions.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message