Digi Connect ME® DC-ME-Y413-S Equivalent & Substitute Parts

Part Overview

The Digi Connect ME® DC-ME-Y413-S is an embedded module featuring an ARM926EJ-S processor running at 75MHz with 8MB RAM and 16MB Flash storage. This module is classified as an MPU Core within the Digi Connect ME® series and utilizes an RJ45 connector interface. The product is currently listed as obsolete, making identification of compatible substitute parts essential for ongoing system maintenance, legacy system support, and component procurement planning.

Substiute Parts

DC-ME-Y413-S

DigiIn Stock: 724DC-ME-Y413-S Datasheet

Current PartRFQ

DC-ME-Y402-S-UPW

DigiIn Stock: 1005DC-ME-Y402-S-UPW Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DC-ME-Y413-S is determined by strict alignment of the following critical parameters:

• Core Processor: ARM926EJ-S, NS9210 (must match exactly)
• Operating Speed: 75MHz (must match exactly)
• RAM Size: 8MB (must match exactly)
• Connector Type: RJ45 (must match exactly)
• Physical Dimensions: 1.450" L x 0.750" W / 36.70mm x 19.10mm (must match exactly)
• Operating Temperature Range: -40°C ~ 80°C (must match exactly)
• Series: Digi Connect ME® (must match exactly)

The substitute part DC-ME-Y402-S-UPW meets all critical electrical and mechanical parameters required for functional equivalence. Flash memory capacity differs (4MB versus 16MB), but this parameter does not prevent substitution when system requirements permit reduced storage capacity.

Parameter Comparison

Engineering Selection Recommendations

The DC-ME-Y402-S-UPW is an active product with current manufacturing support, providing supply chain continuity for the obsolete DC-ME-Y413-S. Both modules share identical processor architecture, clock speed, RAM capacity, physical form factor, and thermal operating range.

The primary distinction is Flash memory capacity: the substitute part provides 4MB Flash versus the original 16MB. Selection of the DC-ME-Y402-S-UPW is appropriate when system firmware and application storage requirements do not exceed 4MB. The substitute part carries RoHS Compliance certification, whereas the original part does not specify RoHS status. Both parts maintain REACH Unaffected status and identical HTSUS classification (8517.62.0090).

Frequently Asked Questions (FAQ)

Q: Can DC-ME-Y402-S-UPW directly replace DC-ME-Y413-S in existing designs?

A: Direct replacement is possible when system firmware and application code fit within 4MB Flash storage. The identical processor, speed, RAM, connector type, and physical dimensions ensure mechanical and electrical compatibility. Verify that your application does not require the additional 12MB Flash capacity of the original part.

Q: What is the primary difference between these two modules?

A: Flash memory capacity differs: DC-ME-Y413-S provides 16MB, while DC-ME-Y402-S-UPW provides 4MB. All other electrical and mechanical specifications are identical.

Q: Why is the original part listed as obsolete?

A: The DC-ME-Y413-S is no longer in active production. The DC-ME-Y402-S-UPW remains in active production and serves as the current equivalent offering from Digi within the Connect ME® series.

Q: Are there any compliance differences between the two parts?

A: The DC-ME-Y402-S-UPW carries RoHS Compliance certification. The original DC-ME-Y413-S does not specify RoHS status. Both parts maintain REACH Unaffected status.

Q: What packaging is available for the substitute part?

A: The DC-ME-Y402-S-UPW is supplied in Bulk packaging, whereas the original part does not specify packaging type.